Electrolux PURE A9 Purifier Instruction Manual

Electrolux PURE A9 Purifier

Appliance:

1. Control panel

2. Air outlet

3. Air quality light

4. Air quality sensor

5. Fabric handle

6. Multi-layer filter

7. Air Intake door

8. Air intake . Remote control

9. Product handles

10. Wheels
    Control panel:

11. On/Off button

12. Mode button

13. WIFI indicator

14. Child lock indicator

15. Filter change indicator

16. lionizer indicator

17. Scheduler indicator

18. Fan speed slider

19. Display screen

20. Mode indicator
    Remote control:

21. Increase/Decrease Fan Speed

22. On/Off

23. SMART Mode

Features might be added or updated with new app releases.
Note: For reference only. Actual product components might vary slightly based on model purchased. www.electrolux.com

SAFETY INFORMATION

This USER MANUAL provides specific operating instructions for your model. Use the unit only as instructed in this USER MANUAL. These instructions are not meant to cover every possible condition and situation that may occur. Common sense and caution must be practiced when installing, operating, and maintaining any appliance.
WARNING! Avoid fire hazard or electric shock. Do not use an extension cord or an adaptor plug. Do not remove any prong from the power cord.

• This appliance can be used in S0Hz or 60Hz power supply without any change.
• Do not, under any circumstances, cut, remove or bypass the grounding prong.
• Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Read product labels for flammability and other warnings.
• Do not let water or any other liquid or flammable detergent enter the appliance to avoid electric shock and/or a fire hazard.
• Do not touch the fan blade when removing the filter.

Children and Vulnerable People Safety

WARNING! Risk of suffocation, injury or permanent disability.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they are under supervision or have been given instruction concerning use of the appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.
• Cleaning and product maintenance shall not be made by children without supervision.
• Children of less than 3 years should be kept away unless continuously supervised.
• Keep all packaging away from children.
• lf the appliance has a child safety mode, we recommend you activate it.

Electrical Information

WARNING! Avoid fire hazard or electric shock.
If you are not sure the outlet is adequately grounded or protected by a time delay fuse or circuit breaker, have a qualified electrician install the proper outlet according to the National

• Electrical Code and applicable local codes and ordinances.

• Do not use an extension cord or an adapter plug.

• Never unplug the unit by pulling on the power cord.

• Always grip the plug firmly and pull straight out from the receptacle.

• Do not pinch, bend, or knot the power cord.

• Do not cut or damage the power cord.

• If the power cord is damaged,
  it should only be replaced by an authorized Electrolux servicer.

• This unit contains no user-serviceable parts.

• Always call an authorized Electrolux servicer for repairs.

• Be sure to unplug the unit before cleaning to prevent shock or fire hazards.

Safety Precautions

CAUTION! Avoid Serious Injury or Death.

• Do not insert or place fingers or objects into the air discharge area or front grille of the unit.

• Do not start or stop the unit by unplugging the power cord or turning off the power at the electrical box.

• In the event of a malfunction (sparks, burning smell, etc.),
  immediately stop the operation, disconnect the power cord, and call an authorized Electrolux servicer.

• Do not operate the unit with wet hands.

• CAUTION! Avoid Injury or damage to the unit or other property.

• Do not direct airflow at fireplaces or other heat related sources as this could cause flare ups.

• Do not climb on or place objects on the unit.

• Do not hang objects off the unit.

• Do not place containers with liquids on the unit.

• Turn off the unit at the power source when it will not be used for an extended period of time.

• Operate the unit with air filter in place.

• Do not block or cover the intake grille, discharge area and outlet ports.

• Ensure that any electrical/electronic equipment is 30cm away from the unit.

DISPOSAL

• This symbol on the product indicates that this A product contains a battery which shall not be disposed with normal household waste.
• This symbol on the product or on its packaging A indicates that the product may not be treated – as household waste.

To recycle your product, please take it to an official collection point or to an Electrolux service center that can remove and recycle the battery and electric parts in a safe and professional way. Follow your country’s rules for the separate collection of electrical products and rechargeable batteries.

thank you for choosing an Electrolux air purifier.
Always use original accessories and spare parts to get the best results. This product is designed with the environment in mind. All plastic parts are marked for recycling purposes.

BEFORE STARTING

• Read this manual carefully.
• Check that all parts described are included.
• Pay special attention to the safety precautions!

Picture pages 2-4

BEFORE FIRST USE

Place the product according to the instructions below for optimal operation and results:

1. Operate the air cleaner in an enclosed area.
   Close all doors, windows, and other openings connecting to the outside of the room.

2. Place the air cleaner in a location that does not restrict the airflow through the top of the appliance.

3. The appliance must be placed on a leveled floor that can support it.

4. There should be a minimum of 30 cm of clearance around the appliance.
   Remove the plastic protective bag from the multi-layer filter:

5. Pull the Fabric handle outward to remove the air intake door.

6. Take out the multi-layer filter pulling it out by the handle.

7. Remove the plastic protective bag from the multi­ layer filter.

8. Reinstall the multi-layer filter into the appliance.

OPERATION INSTRUCTIONS

TO TURN ON THE APPLIANCE

9. Plug in the appliance and tap (touch and release) the “@” button to turn it on.
   NOTE: It will take about 1 O seconds for the sensor to analyze the air quality, during this time the Loading LED and the Air quality light will pulsate slowly in white. Each time the appliance is turned on the SMART mode is activated automatically and the fan runs in low speed until the air quality analysis is complete.
   SMART MODE

10. In this mode, the appliance will choose the fan speed automatically, based on the air quality level. This is the default mode each time the appliance is turned on.
    NOTE: In “SMART” mode the fan speed cannot changed manually.
    About the Air quality light

11. The appliance has an air quality sensor that analyzes the air quality.
    The air quality light will show the real-time air quality through different colors of light. As shown below:LIGHT’S COLOR| PM 2.5 (µg/m 3 )| AIR QUALITY
    ---|---|---
    Blue| 0-15| Good
    Green| 16-35| Average
    Orange| 36-75| Poor
    Red| Above 75| Very Poor

NOTE: It will take about 1 O seconds for the sensor to analyze the air quality each time the appliance is turned on. During this time, the air quality light will pulsate slowly in white.
Very high humidity conditions in the room might produce condensation in the sensors. This could affect the accuracy of the sensor readings.
MANUAL MODE

12. Tap the “MODE” button to switch the appliance to “MANUAL:’ mode. In this mode, the fan speed can be changed manually by touching the Fan speed slider.
    NOTE: The fan speed will change gradually after a new fan speed is selected.
    WIFI FUNCTION

13. IE This appliance is equipped with a WiFi module, which enables remote control and access to the full functionality of the system via our smartphone app. Download our Pure A9 app and follow the instructions for how to connect it with your appliance. When the connection is stablished, the WiFi indicator will light up.
    CHILD LOCK FUNCTION

14. The Child lock can be activated and deactivated by long pressing the On/Off and the Mode button simultaneously for 4 seconds. This function can also be activated or deactivated via the PURE A9 app. When the Child lock is activated, the control panel of the appliance cannot be interacted with and the Child lock indicator light up.
    FILTER CHANGE INDICATOR

15. IE The filter change indicator will light up to remind you to change the filter. Refer to the instructions in the Pure A9 app or the Electrolux website on where to purchase replacement filters. Ensure the plastic protective bag is removed from the replacement filter before use. After the filter is replaced, the filter change indicator will turn off automatically.
    NOTE: The multi-layer filter cannot be washed, it can only be replaced.
    IONIZER FUNCTION

16. The ionizer function can only be activated and deactivated by using the Pure A9 app (smartphone application). When this function is activated,
    the ionizer indicator lights up and the appliance generates ions to improve the unit’s performance and with it the room’s air quality.
    SCHEDULE FUNCTION

17. [El In the Pure A9 app (smart phone application) you can set different schedules, for example that the fan speed goes down during night time and then goes back to normal speed during day time. When a schedule is set, the schedule indicator on the appliance will light up.
    DISPLAY SCREEN

18. IE The air quality indicator can show actual room air quality in relation to different types of pollutants. PM 2.5, PM 10, TVOC and PM 1.0 values will be displayed on the screen in a loop.
    HOW TO USE THE REMOTE CONTROL ON/OFF BUTTON
    Press the”@” button to turn the unit ON or Off.
    FAN SPEED BUTTONS
    Press the”-” button to decrease the fan speed. Press the”+” button to increase the fan speed. NOTE: The appliance will change to manual mode automatically when either of the fan speed buttons are pressed.
    SMART BUTTON
    Press the “O” button to switch the unit from manual mode to smart mode.
    HOW TO REPLACE THE REMOTE CONTORL BATTERY

19. Pull the bottom section of the remote control while holding the top section firmly to expose the battery. Replace the old battery with a new CR2032 type battery. Reinstall the bottom section.
    CAUTION

    • Be sure the batteries are inserted properly.
    • Do not use batteries other than the type specified.
    • Do not dispose of batteries in fire. Batteries may explode or leak.
    • Do not swallow.
    • Keep batteries away from children.
      CARE AND CLEANING
      Cleaning the appliance
      Unplug the appliance before cleaning to prevent shock or fire hazards.

20. The plastic parts of the appliance may be cleaned with an oil-free dry cloth or by using a vacuum cleaner with a soft brush.

21. The fabric on the appliance cannot be removed. Clean the fabric by using an oil-free dry cloth or a vacuum cleaner with a soft brush.

22. Dust accumulated in the Air quality sensor can result in incorrect sensor readings and affect performance. Use a vacuum cleaner with a soft brush to remove any dust that might accumulate in this area. Vacuum at least monthly.

23. Never use abrasive, harsh cleaners or wax when cleaning the unit.

24. NOTE: The multi-layer filter can not be washed, it can only be replaced.
    CAUTION! Do not touch the fan blade when removing the multi-layer filter.
    Storage

25. If you are not planning to use the appliance for a long time, cover it with plastic or return it to its carton.
    Enjoy a great cleaning experience with your Electrolux air purifier PURE A9-40/PURE A9-60!
    Electrolux reserves the right to change products, information and specifications without notice.

TROUBLESHOOTING

Push the power plug firmly into the electrical outlet.
• Check if the house fuse is blown or the circuit breaker tripped. Replace the fuse with a time delay type or reset the circuit breaker.
The air quality does not improve.| • Check if the windows or doors are opened. Close all doors, windows and other openings connecting to the outside of the room.
PROBLEM| SOLUTION
---|---
The air purifier does not operate.| • Check if the power plug is disconnected. Push the power plug firmly into the electrical outlet.
• Check if the house fuse is blown or the circuit breaker tripped. Replace the fuse with a time delay type or reset the circuit breaker.
The air quality does not improve.| • Check if the windows or doors are opened. Close all doors, windows and other openings connecting to the outside of the room.

For any further problems, contact an authorized Electrolux service center.

References

• Electrolux

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>