HOVER-1 H1-NTL Night OWL Electric Folding Scooter User Manual

HOVER-1 H1-NTL Night OWL Electric Folding Scooter

Always wear a properly fitted helmet that complies with CPSC or CE safety standards when you ride your scooter.

Correct Fitting:
Make sure your helmet covers your forehead.

Incorrect Fitting:
Forehead is exposed and vulnerable to serious 1nJury.

WARNING

As with all mechanical components, the Hover-1 Night Owl is subjected to wear and high stresses. Different materials and components may react to wear or fatigue in different ways. If the design life of a component has been exceeded, it may suddenly fail possibly causing injuries to the rider. Any form of crack, scratch or change of coloring in highly stressed areas indicate that the life of the component has been reached and it should be replaced. Do not ride in an abusive manner.
CAUTION

In this manual, the CAUTION sign indicates a hazardous situation which, if not avoided, can cause minor or moderate injury.
WARNING

In this manual, the WARNING sign indicates a hazardous situation which, if not avoided, can cause death or serious injury.
WARNING

Great care should be taken with the Hover-1 Night Owl when folding or unfolding. If you do not understand how to operate the levers, please visit www.Hover-l.com
DO NOT RIDE YOUR HOVER-1 Night Owl WITHOUT ALL RELEASES SECURELY LOCKED.

INTRODUCTION

This manual is designed to give you the information you need for the safe operation and maintenance of your new Night Owl scooter. Please read it thoroughly before riding your Night Owl.

WARNING

Make sure you read this complete manual before riding your Hover-1 Night Owl. Failure to do so, or failure to follow its guidelines could lead to serious injury or death.

The Night Owl is a personal transporter. Our technology and production processes are developed with strict testing for each Night Owl scooter. Operating the Night Owl without following the contents of this manual may lead to damage to your Night Owl scooter, or bodily injury.

PACKAGE CONTENTS

• Hover-1 Night Owl Electric Folding Scooter
• Charging Cable
• Charger
• Operation Manual

Your Hover-1 Night Owl’s serial number is stamped respectively on the bottom of the platform. Record the serial number in the designated area of the “WARRANTY” section of this manual in the event that your Hover-1 Night Owl is lost or stolen.

WARNING!

PLEASE READ THE USER MANUAL THOROUGHLY.
Failure to follow the basic instructions and safety precautions listed in the user manual can lead to damage to your scooter, other property damage, serious bodily injury, and even death.

Thank you for purchasing the Hover-1 Night Owl. Please read all instructions carefully before using and retain this manual for future use and reference.

This manual applies to the Hover-1 Night Owl.

• In order to avoid dangers that are caused by collisions, falls, and loss of control, please learn how to ride the Night Owl safely.

• You can learn operating skills by reading the product manual and watching videos.

• This manual includes operating instructions and precautions.
  Users must read it carefully and follow the instructions.

• All users are responsible for any consequences caused by violating warning contents or prompt operations. Hover-1 can not be held liable.

ATTENTION

1. Use only the supplied charger with this scooter.
2. The operating temperature range of the charger is 32- 104° F (0-40° C) .
3. The operating temperature range of the E-Scooter is 32 – 104° F (0- 40° C) .
4. Do not ride on icy or slippery surfaces.
5. Read the operation manual and warning labels before riding.
6. Store the Night Owl in a dry, ventilated environment.
7. When transporting the Night Owl, avoid violent crashes or impact.

LOW TEMPERATURE WARNING
Low temperature will affect the lubrication of moving parts inside the Night Owl, increasing internal resistance. At the same time, in low temperatures, the discharge capacity and the capacity itself of the battery will be significantly decreased.

Use caution when riding the Night Owl in cold temperatures (below 40 degrees F).

Doing so may increase the risk of mechanical failures of the scooter, which may lead to damage to your scooter, other property damage, serious bodily injury and even death.

SAFETY INSTRUCTIONS

• Keep the scooter away from heat sources, direct sunlight, humidity, water and any other liquids.
• Do not operate the scooter if it has been exposed to water, moisture or any other liquids to prevent against electric shock, explosion and/or injury to yourself and damage to the scooter.
• Do not use the scooter if it has been dropped or damaged in anyway.
• Repairs to electrical equipment should only be performed by the manufacturer. Improper repair voids the warranty and may place the user at serious risk.
• Do not puncture or harm the exterior surface of the product in anyway.
• Keep the scooter free from dust, lint, etc.
• Do not use this scooter for anything other than its intended use or purpose. Doing so may damage the scooter or lead to property damage, injury or death.
• This product is not a toy. Keep out of reach of children.
• Do not expose batteries, battery pack, or batteries installed to excessive heat, such as direct sunlight, or open flame.
• Do not allow hands, feet, hair, body parts, clothing or similar articles to come in contact with moving parts, wheels or drive-train, while the Night Owl is running.
• Do not operate, or allow others to operate, the Hover-1 Night Owl, until the user understands all instructions, warnings and safety features described in this manual.
• Check with your doctor if you have a medical condition that could affect your ability to use the Hover-1 Night Owl.
• Persons with head, back or neck ailments or prior surgeries to those areas of the body are not recommended to use this Hover-1 Night Owl.
• Do not operate if you are pregnant, have a heart condition, or have both.
• Persons with any mental or physical conditions that may make them susceptible to injury or impair their physical or mental capabilities to recognize, understand and perform all of the safety instructions and to be able to assume the hazards inherent in unit use, should not use the Hover-1 Night Owl.

NOTES :

In this manual, the above symbol with the word “NOTES” indicates instructions or relevant facts the user should remember prior to using the scooter.
CAUTION!
In this manual, the above symbol with the word “CAUTION” indicates a hazardous situation which, if not avoided, can cause minor or moderate injury
WARNING!
In this manual, the above symbol with the word “WARNING” indicates a hazardous situation which, if not avoided, can cause death or serious injury.
SERIAL NUMBER
Please keep the serial number on file for warranty claims as well as proof of purchase.
WARNING!
WARNING: Prolonged exposure to UV rays, rain and the elements may damage the enclosure materials. Store indoors when not in use.

SPECIFICATIONS

PARTS LIST

A.  Scooter Frame
B. Handle Bar Assembly
C.  Charger+ Charging Cable
D.  3 PCS Allen Wrench & M6 Screws (6)
E.  M 15 Spanner
F.  Rubber Vibration Damper
G. Plastic Spiral Cable Wrap
H.  Silicone Cable ne
I.  Operation Manual

HOVER-1 NIGHT OWL DIAGRAM

FEATURES/PARTS

1. Handle Grip
2. Steering Bar
3. Brake and Bell
4. Throttle
5. Power Button
6. Handlebar Base
7. Locking Ribbon
8. Display
9. Steering Pole
10. Folding Screw
11. Folding Bar
12. Front Axel
13. Front Suspension
14. Front Fender
15. Front Wheel
16. Front Suspension
17. Front Disc Brake
18. Front Light
19. Side Reflector
20. Side Light Cover
21. Deck
22. Foot Pedal
23. DC IN
24. Deck Rear Cover
25. Rear Suspension
26. Rear Deck Bottom Cover
27. Rear Disc Brake
28. Rear Wheel
29. Rear Fender
30. Rear Reflector
31. Tail Light
32. Rear Deck
33. Rear Foot Pedal
34. Kickstand

SETTING UP YOUR SCOOTER

PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY

ATTACHING THE HANDLEBAR KIT
Attach the handle bar kit by placing it into the steering column, align the front and back screw holes, and tighten the 4 screws into place using the Allen wrench provided.

PINCH POINTS

FOLDING & UNFOLDING

❶ Loosen the folding hinge until the screw is out of the fold
❷ Put down the steering pole
❸ Hang the locking ribbon to the bottom of the rear pedal

Before riding please make sure to fully tighten the folding screw Once folded secure locking ribbon around back of scooter

CARE & MAINTENANCE

• Do not expose the scooter to liquid, moisture, or humidity to avoid damage to the product’s internal circuitry.
• Do not use abrasive cleaning solvents to clean the scooter.
• Do not expose the scooter to extremely high or low temperatures as this will shorten the life of the electronic scooter, destroy the battery, and/or distort certain plastic parts.
• Do not dispose of the scooter in fire as it may explode or combust.
• Do not expose the scooter to contact with sharp objects as this will cause scratches and damage.
• Do not let the scooter fall from high places, as doing so may damage the internal circuitry.
• Do not attempt to disassemble the scooter.
• Only use the charger provided by Hover-1 .
• Using only the manufacturer’s authorized replacement parts with installation performed by dealers or other skilled persons.

WARNING!

Avoid using water or other liquids for cleaning. If water or other liquids enter the Night Owl, it will cause permanent damage to the internal components.
WARNING!
Users who disassemble the Night Owl scooter without permission will void the warranty.

CHARGING YOUR SCOOTER

• Ensure that the charging port is clean and dry.

• Make sure that there is no dust, debris or dirt inside the port.

• Plug the charger into a grounded wall outlet.

• Connect the cable with the power supply.

• Align and connect the 1-pin charging cable into the charging port of the Night Owl Scooter.
  (DO NOT FORCE OR BEND THE CHARGING CABLE AS IT MAY CAUSE THE PRONGS TO BEND OR BREAK.)

• The charging indicator light on the charger itself should change to RED, indicating that your scooter is now being charged.

• When the RED indicator light on your charger turns to GREEN, then your scooter is fully charged.

• After fully charging your Night Owl Scooter, unplug the charger from your scooter and from the power outlet.

WARNING!

Any Night Owl Scooter that does not work properly can cause you to lose control and fall. Inspect the entire device thoroughly before every ride, and do not ride it until any problems have been corrected.

BATTERY CARE/ MAINTENANCE

BATTERY SPECIFICATIONS

• Battery Type: Rechargeable lithium-ion battery
• Charge Time: Up to 10 hours
• Battery Voltage: 52 V
• Battery Capacity: 18 Ah
• Working Temperature: 32°F – 104 F
• Charging lemperafure: 50°F – 104°F
• Storage Time: 1 year
• Storage Temperature: -4F – 104°F
• Storage Humidity: 5%-95%

BATTERY MAINTENANCE

To maintain the longevity of your Night Owl scooter when not in use, it is recommended fo recharge the battery minimum every 2 months to maintain the battery life. The lithium-ion battery is built into the scooter. Do not disassemble the scooter to remove the battery or attempt to separate it from the scooter.

• When charging the scooter, please use the enclosed 1-pin charging cable or otherwise ensure that the battery charging conditions are met.
• Do not connect or attach the scooter or the battery to a power supply plug or directly to a car’s cigarette lighter.
• Do not place the scooter or batteries near a fire, or into direct sunlight.
• Heating the scooter and/or the battery can cause additional heating,braking, or ignition of the battery inside the scooter.
• Do not continue charging the battery if it does not recharge within the specified charging time. Doing so may caUse the battery to become hot, rupfure, and or ignite.

CAUTION
Only use the included charging cable and charger to charge your Hover-1 Night Owl. Using any other unauthorized charger may damage your Hover-1 Night Owl

To presenve natural resources, please recycle or dispose of batteries properly. This product contains lithium-ion bateries. Local, state, or federal laws may prohibit disposal of lithium-ion batteries in ordinary trash. Consult your local waste authority for information regarding available recycling and/or disposal options.

• Do not attempt to modify, change, or replace your battery.
• Do nof use yOur scooter if the baffery begins fo emit an odor, overheat, or begins to leak.
• Do not touch any leaking materials or breathe fumes emitted.
• Do not allow children and animals to touch the battery.
• The battery contains dangerous substances, do not open the battery, or insert anything into the battery.
• Please only use the charger provided by Hover-1.
• Do not attempt to charge the scooter if the battery has discharged or emits any substances. In this case, immediately distance yourself from the battery in case of fire or explosion.
• Lithium-ion batteries are considered to be hazardous materials.
• Please follow all local, state and federal laws in regard to recycling, handling and disposing of Lithium-ion batteries.
• This battery charger can be Used by children aged from 15 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concening use of the appliance in a Safe way and understand the hazards involved. Do not allow children to play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

WARNING
SEEK IMMEDIATE MEDICAL ASSISTANCE IF YOU ARE EXPOSED TO ANY SUBSTANCE THAT IS EMITTED FROM THE BATTERY.

LED DISPLAY

ON/OFF BUTTON

• To power ON press button
• To power FF press and hold the button

PUSH TO START
GP and hold the set button to turn on/ oft the kick start feature. when the kick start feature is on you don’t have fo kick off in order for fhe moror To engage.

SPEED MODES
Ensure the Night Ow is powered on. Tap the mode button on display, the speed mode should display and indicate which speed mode is CuTently activated.

• FORD: Off-Road Mode (max 31mph)
• ROAD: Street Mode (max 20mph)

CRUISE CONTROL

Tap and hold the mode button on the screen to turn on. (you will see speedometer icon displayed on screen) When cruise control is on active the icon will disappear when you start riding and will display again once you are going at the same speed for more than6 seconds, signaling that it is on. When cruise control is off the scooter will not stay at a constant speed. YoU will have to keep your thumb on the throttle.

LED LIGHTS
Press power button once to turn headlight and tail light on/off or tap on the light button on the LED display to tun on/off.

APP INSTRUCTION

CONNECT THE SCOOTER

• Scan the QR code to download the Hover-1 E-Mobility App.
• Open the app and select “sign up” or “log in”.
• Complete any updates that are prompted.
• Click the button on the top right-hand corner (+) to add a scooter.
• Click “Auto Scan” at the top of the screen and turn on your scooter.
• Select “Enable Bluetooth”, and then click “Start Scanning”.
• After searching, an available scooter that can be connected appears, click “Next”.
• As shown in the picture, the status is “connecting”. Once the connection is established, it will automatically add the scooter to the home page. Subsequently, the next fime you open the app you can directly select the scooter.
• Lastly, click “done” to complete.

DISCONNECT THE EQUIPMENT

• Select the icon ” <“on the top right coner of the app product Screen.
• Select”Remove Device” button at the bottom.
• Lastly, “Disconnect and wipe data” to remove scooter from the app product panel

INSTRUCTIONS

FAILURE TO FOLLOW ANY OF THE FOLLOWING SAFETY PRECAUTIONS CAN AND MAY LEAD TO DAMAGE TO YOUR SCOOTER, VOID YOUR MANUFACTURER WARRANTY, LEAD TO PROPERTY DAMAGE, CAUSE SERIOUS BODILY INJURY, AND CAN LEAD TO DEATH.

OPERATING YOUR SCoOTER
Make sure the scooter is fully charged before the first initial use. Before timing on your Night Owl scooter, ride it like a normal kick scooter to get comfortable with the scooter before using if with the motor. When comfortable riding the scooter, power if on. For the motor fo activate, you must first start riding the scooter and then push thee throtile down with your thumb. o slow down the scooter, disengage the throttle and squeeze the brake handle fo engage the disk brake. The brake is pressure sensitive So a fighter grip means more stopping power. To furn, use the handlebar fo furn in the direction you wish for fun. The Night Owl scoter can be operated manually if you do not wish to use the motor. As you get comfortable on the scooter, you will notice it becomes easier to maneuver. Remember at higher speeds, if is necessary fo shift your weight to Overcome the centrifugal force. Brace yourself if you encounter bumps or uneven surfaces, then dismount and carry your Night OM to a safe operating surface.

WARNING
Do not make sharp turns at high speeds to avoid danger. Do not turn or ride quickly along slopes, as it may cause serious injuries.

WARNING
Failure to follow the safety precautions lisfed below could ledd fo serious bodily injury and/or death.

WEIGHT AND SPEED LIMITATIONS
Speed and weight limits are set for your own safety. Please do not exceed the limits listed in the “Specifications” secfion of this manual.

WARNING
Overweight exertion on the scooter may increase possibility of injury or product damage.

OPERATING RANGE
The follovwing are some of the major factors that will affect the operafing range of your scoofer. Terain: To maximize riding distance ride on a smooth, flat surface. Riding uphill and/or on rough terain will reduce distance significantly. Weight A lighter uUser will have further range than a heavier User. Ambient temperature: Please ride and store the scooter under recommended temperatures, This will increaIse riding distance baffery life, and overall performance of your scoofer. Speed and Riding style: Mainfaining a moderate and consisfent speed while riding produces maximum disfance. Iraveling af high speeds for extended periods, frequent starts and stops, idling and frequent acceleration or deceleration will decrease overall aistance. Do not attempt to brake suddenly as this may lead to injury or damage To your brake discs.

WARNING

Proper use of your brake is vital to ensure safe, efficient stopping. To avoid misuse and potential injury, do not apply sudden or excesslive force fo your brake. Apply the brake gradualy and give yourself enough room fo come to a complete stop safely. While riding your Night Owl scooter, if there is a system error or ilegal operation performed the scooter will prompt the user in a variety of ways.

WARNING
If the Night Owl does not wok properly it can cause serious injuries. Inspect the entire scooter thoroughly before every ride, and do not ride it until any problems have been corected.

The following are common occurences where you will see Safety Alerts. These notices should not be ignored, but appropriate action should be taken to corect any illegal operation, failure or erors.

• Prohibited riding surfaces (uneven, foo steep, unsafe, etc.)
• Battery voltage is too low.
• The scooter is still charging.
• Overheating, or motor temperature is too high.
• When the battery is about to run out of power, the battery icon will flash.
• If any or both tires are blocked, the scooter will stop after 10 seconds.
• When the battery level has depleted below protection mode, the
• Scooter motor will power off after 15 seconds.

TIPS FOR BETTER RIDING EXPERIENCE

Be cautious when you ride. You can prevent many accidents if you Use common sense.

• Ensure you have had enough practice with all functions and features of your Night Owl before taking it out for a ride.
• Start slow, then increase speed when you are comfortable.
• Remember that increased speed also amplifies the bumps in the rodd.
• Bend yOur knees when riding on bumpy or uneven pavement to absorb the shock and vibration and help you keep your balance.
• lt is recommended that you try your scooter on a tlat smooth
• SUrfaces first before faking it out on the road.

PRE-RIDE CHECKLIST

Before each cycle of operation, the operator shall perform the pre-operation checks specitied below:

• That the braking system is functioning properly.
• That all safety labels are in place and understood by the Operator.
• That any and all axle guards, chain guards, or other covers or gUards SUpplied by the manufacturer are in place and in working condifion.
• That fires are in good condition, inflated properly, and have Sufficient fread remaining.
• That the area that the unit is to be operated in is safe and SUifable for safe operafion.
• Ensure the battery is fully charged before riding your scooter.
• Make sure to wear comfortable clothes and flat closed-toe shoes when operating yOur scooter.
• Ensure that your Night Owl is in proper working order each and every time you ride. lf a part of the Night Owl scooter does not funcfion corectly, please Contact Our cusfomer support feam.

Please be sure to read the Operation Manual, which will explain the basic working principles and provide tips on how to best enjoy your experience. It is important that you fully understand all elements of your Night Owl scooter. If these elements are not used corectly, yoU will not have ful control of your Night Owl. Before you ride, leam the functions of fhe various mechanisms on your scooter. Practice Using these elements of your Night Owl at slower speeds in a flat, open area betore faking fhe scooter ouf in publiC areas.

WARNING
iF Night Owl Scooter does not work properly can cause serious injuries. Do not ride an Night Owl with a part that is damaged; repláce the damaged part before riding.

• RideHoverl
• RideHoverl
• RideHoverl
• www.Hover-1.com

BATTERY CARE /MAINTENANCE

BATTERY SPECIFICATIONS

• Battery Type: Rechargeable lithium-ion battery
• Charge Time: Up to 10 hours
• Battery Voltage: 52 V
• Battery Capacity: 18 Ah
• Working Temperature : 32°F- 104°F
• Charging Temperature: 50°F – 104°F
• Storage Time: 1 year
• Storage Temperature: -4°F- 104°F
• Storage Humidity: 5%-95%

BATTERY MAINTENANCE
To maintain longevity of your Night Owl scooter when not in use, it is recommended to recharge the battery minimum every 2 months to maintain the battery life.

• When charging ihe scooler, please Use the enclosed 1-pin charging cable or otherwise ensure that the battery charging Conditions are met.
• Do not connect or attach the scooter or the battery to a power Supply plug or directly to a car’s cigarette lighter.
• Do not place the SCooter or batteries near a fire, or into direct sunlight. Heating the scooter and/or the battery can cause additional heating, braking, or ignition of the battery inside the scooter.
• Do not continue charging the battery if it does not recharge within the specified charging time. Doing so may cause the battery to become hot, rupfure, and or ignite.

CAUTION
Only use the included charging cable and charger to charge your Hover-1 Night Owl. Using any other unauthorized charger may damage your Hover-1 Night Owl.

FCC STAEMENT

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital scooter, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not ocCur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turming the equipment off and on, the User is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This scooter complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This SCooter may not cause harmful interference, and (2) this SCooter must accept any interference received, including interference that may cause undesired operation.

WARRANTY

For warranty information, Please visit us at: www.hover-1.com

Manufacturer: DGL Group, Ltd 195 Raritan Center Parkway Edison, NJ 08837 Affix Serial Number Label HerE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>