global sources S36 Magnetic 3-in-1 Wireless Charger User Manual

**global sources S36 Magnetic 3-in-1 Wireless Charger User Manual

**

Product Introduction

Charge your iPhone 12 iPhone 13series device, Apple Watch, and AirPods at the same time with our Magnetic 3-in-1 Wireless Charger. There’s a 15-watt wireless charging stand , a magnetic charging module for Apple Watch, and a pad to wirelessly charge your AirPods.Charge All Your Apple Gear, All at Once.

Applicable Devices

• For
  • IPhpne13mini
  • 1Phone13
  • iPhonel3Pro
  • iPhone13ProMax
  • iPhone 12 Pro Max
  • iPhone 12 Pro
  • iPhone 12
  • iPhone 12 mini
• For
  • Apple Watch 1/2/3/4/5/6/7
• For
  • AirPods 2
  • AirPods Pro
  • AirPods 3

Product Specification

• Input: 5V/3A ,9V/2A( Max)
• Output:

1. Phone 1 5W(Max)
2. Watch 2.5W(Max)
3. Airpods 2.5W(Max)

Standard Accessories

• 3-in-1 Wireless
• Charger
• Type-C cable
• User manual

LED lamp changed to be blue and green flashing during wireless charging

process then means charging failed

The following situation can cause failures, like charging slowly, stop charging, over-temperature for charging position.

1. The adapter is not run up to standard (No PC USB output power supply).
2. The charging cable is not up to standard.
3. The phone case is too thick ( within 2mm thickness phone case recommended ).
4. There is metal on the back of cell phone or phone case.
5. Smartphone does not support wireless charging function.

Attention

1. Please keep the charger away from water or other liquid.
2. If you need to clean the charger, please make sure it is not connected to power supply.
3. Using Environment temperature remains -20-45t.

Warning Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>