QFX PBX-5 Rechargeable 6.5″-User Guide

QFX PBX-5 Rechargeable 6.5″

Specifications

• Power Output: 10W,
• Frequency Response for main speaker: 50Hz-20KHz,
• Power Supply: DC9V,
• Product Dimensions: 9.1 x 9.4 x 13.19 inches,
• Item Weight: 4.8 pounds

Introduction

With three decades at the forefront of high-quality electronics, QFX is unwavering in its dedication to providing the most up-to-date Bluetooth audio, tailgating, DJ speaker systems, and numerous other prosumer multimedia solutions, all while keeping costs down for budget-conscious families, businesses, and everyone in between. From the first apartment to the family home, from the freshman dorm to the alumni tailgate party, QFX has the items you need!

These speakers meet the criteria of QFX speakers. These have the best powerful sound which is suitable for many events. You can listen to music sat any event. Such as small parties of big gatherings.

Control Panel Functions

1. LED Display

2. Volume Adjustor

3. Power/Input (Hold for 3 seconds to switch on/off the unit and mode selection for Bluetooth, FM Radio, Line Input, USB)

4. Light (Light mode selection & switch on/off button)

5. EQ

6. Mic Input

7. Line Input

8. USB PortCharging Indicator
   RED=Charging
   GREEN= Full Charged

9. DC interface (9)

10. Next track

11. Play/Pause (In FM mode, hold for 3 seconds the device will enter into automatic scan)

12. Previous track

POWER SOURCE

1. Please charge the unit at least 4 hours before first time using.
2. Long press the POWER/INPUT button on the panel to Switch on or off the speaker.

CHARGE THE BATTERY

When the battery is charging, the CHARGE STATUS lights red. After the battery has fully charged, the light turns to be green.

1. Connect the AC adaptor to the DC IN JACK of the speaker firmly, and plug it into a wall outlet.
2. When the battery is fully charged, first disconnect the AC adaptor from the speaker, then from the wall outlet.
3. The speaker works normally when charging.

POWER/INPUT BUTTON

Press POWER/INPUT button on the front panel to select the mode (LINE, USB, BT OR FM).

PREVIOUS/NEXT BUTTON

By pressing PREVIOUS/NEXT button on the front panel, you can select a specific song from the play list.

PAUSE/PLAY BUTTON

• To stop playing the current track, please press PAUSE/PLAY button on the front panel.
• Press it once again to continue playing.

EQ BUTTON

Press EQ to switch among BA, tb, JAZZ, ROCK, POP, CLAS, G-EQ.

VOLUME ADJUSTMENT DIAL

Twist the dial anticlockwise to decrease the volume and clockwise to increase the volume.

MIC IN JACK
Plug in microphone directly for playing.

USB JACK
Insert USB card directly for playing

LINE IN JACK

1. Connect an audio cable (not included) to the LINE IN JACK of the speaker and to the audio output socket on the external audio devices such as MP3 player, discman, etc then select LINE by pressing the POWER/INPUT button on the front panel.
2. Play from an external audio device.

FM FUNCTIONS

1. Press POWER/INPUT to select FM radio
2. Press PLAY/PAUSE button on front panel for automatic searching and saving the radio stations

PANEL LAYOUT AND FUNCTIONS

• To control the device via your phone, please find and install the app Speaker Pro”.
• Open the App “Speaker Pro” on your phone, there are7 function icons on the main page

1. Bluetooth Music play
2. USB card play
3. Light control color, brightness and light flash mode
4. FM Radio
5. Control Bluetooth connect
6. Line In input mute
7. Equalizer, volume adjustment for music, Microphone and guitar input.

Bluetooth music play

Press to enter into the Bluetooth Music play page. Press “pick songs to play” to pick song page to choose the song you want to play, press “Done” to return to Bluetooth Music play page, also you can operate pause, play, backward, forward & volume adjustment, repeat, random play. Press “Back” to return to the main page.

USB card play

When inserting a USB into the speaker, press to enter the USB Card play page. To choose a song and play music on the USB card, press “Play” to enter into the play control page, where you can operate pause, play, backward, forward & volume adjustment, Press “List” to return to USB list page, press Back” to return to the main page.

Light control colors, brightness and color change mode

Press to enter into Light Control page, you can select any color to show the light color on the speaker, as well as adjust the brightness of the light. To go back to main page, press “<” in the left corner.

Press “Profiles” to enter into Light Effect mode page, you can choose from a total of 12 pre-set light effect modes. To return to Light Control page, press “Light” in the left corner.

FM Radio

Press to enter into FM radio mode, press SCAN to enter into radio program automatic scan. Press for radio program manual scan, top and bottom trimming, Turn the TUNER button radio station can be adjusted. Slide around to adjust radio frequency between 87.5MHz-108.0MHz.

Bluetooth connection

Press to enter into Bluetooth Control connection page, then click “Speaker Pro BLE” to connect to the speaker.

Line In input mute

Press to enter into Line IN input page, press to mute music, press insert a line continue play. Press “Back” to main page.

Equalizer, volume adjustment for Microphone and Music.

Press to enter into Sound Set page to adjust the volume for Music and Microphone.

Press Music button, and then turn Volume or Bass or Treble button to adjust the volume; press Microphone button, and then turn ECHO or Microphone Volume or Delay to adjust the volume. There are 4 pre-set EQ modes: Pop, Classical, Jazz and Rock. You can also press G-Eq to access the graphic equalizer to set up your preferred equalize specification.

FAQ’s

• The Qfx is what?
  A single Quicken account can import transactions from your bank using the QFX download format. It is known as Web Connect format in Quicken menus, and it will appear as OFX in Windows Explorer (since QFX is a variation of OFX).

• How can a Qfx Bluetooth speaker be reset?
  When you hear the gadget turn off, hold down the “volume down” and “power” keys simultaneously for around 6 seconds. Use the speaker as you would a fresh speaker after turning it on.

• The TWS button is what?
  You may experience full stereo sound quality without the necessity of cords or wires thanks to a special Bluetooth function known as True Wireless Stereo (TWS). This is how TWS operates: You connect your selected Bluetooth music source to your primary Bluetooth speaker.

• The QFX speaker has how many watts?
  QFX Rechargeable Bluetooth Party Speaker, 1,500 Watts.

• Which application opens QFX files?
  Format for Quicken OFX (Web Connect) (QFX)

• How can I operate in TWS mode?
  Press the “Power On” button on each speaker repeatedly until you hear the confirmation, “Power on, your speaker is ready to pair.” Any of the speakers’ “Mode” buttons should be long-pressed until you hear “Connected successfully.” The TWS mode of your speakers is now active.

• TWS is it harmful?
  Increased risk of developing cancer, cellular stress, an increase in dangerous free radicals, genetic damage, structural and functional changes to the reproductive system, deficits in learning and memory, neurological disorders, and detrimental effects on people’s overall wellbeing are some of the effects.

• Is TWS a reliable name?
  They are identical to the AirPods and feature the same great battery life, sound quality, and battery case. With this product, I’m quite pleased.

• How do I link my Bluetooth Qfx device?
  Bluetooth: To choose Bluetooth mode, lightly push the MODE/LIGHT button on the control panel. Open the Bluetooth settings on your phone, tablet, or another Bluetooth-enabled audio device simultaneously, then select “BT-87” (there is no need to provide a matching code), and the device and the unit will connect through Bluetooth.

• How are TWS speakers operated?
  Bluetooth signals are used in True Wireless Stereo (TWS) to transmit sound instead of wires or cables. TWS is different from wireless accessories since it still requires physical connections to make sure that various components of a device may work together. Wireless accessories do not require a physical connection to a media source.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>