SIIG 04-137A 1 x 8 HDMI Splitter Over Cat6 Extender User Manual
- June 5, 2024
- SIIG
Table of Contents
SIIG 04-137A 1 x 8 HDMI Splitter Over Cat6 Extender
Features
Extends HDMI 4K@60 signals up to 230ft (70m) over CAT6/7 cable
Support 4K@60Hz YUV 4:4:4, HDR, HDCP 2.2
Supports one HDMI loop-out on Transmitter Support EDID management
Support audio extraction & ARC via Toslink of Receiver
-
HDMI Audio Format: PCM2/5.1/7.1, Dolby& DTS 5.1 Toslink Audio Format: PCM2, Dolby & DTS 5.1
Built-in bi-directional IR extend -
Support RS-232 command control
Lightning Protection, Surge Protection , ESD Protection
Package Contents
- Transmitter
- Receiver x8
- Power adapter DC 12V/2A
- Power adapter DC 5V/2A x8 IR blaster cable
- Receiver cable x8
- Terminal block
- Mount kits
- User Manual
LAYOUT
-
EDID switch: Please refer to EDID settings table
-
IR in: Connect with IR receiver extension cable , please make sure the remote control used is within the effective range
-
IR out: Connect with IR blaster extension cable, please get closer to the source device while using
-
Reset BUTTON: Press to restart the device
-
RJ-45: Connect to Receiver with Cat6 cable
-
HDMI LOOP-OUT: Connect to HDMI display
-
HDMI INTPUT: Connect to HDMI source
-
RS-232: for RS-232 command
-
POWERJACK: DC 12V/2A
-
Reset BUTTON: Press to restart the device
-
Audio switch: Select extract audio from HDMI Input or ARC from TV, for Toslink use.
-
RJ-45: Connect to Transmitter with Cat6 cable
-
Power/Signal LED: flashes when no HDMI signal always on when HDMI signal is transmitted.
-
POWER JACK: DC 5V/2A
-
Toslink Output: For audio extract or ARC use
-
HDMI OUTPUT: Connect to HDMI display
-
IR in: Connect with IR receiver extension cable, please make sure the remote control used is within the effective range
-
IR out: Connect with IR blaster extension cable, please get closer to the source device while using
EDID settings table
Switch Status|
EDID Information
---|---
| 2| 3| 4
0| 0| 0| 0| 4K@60Hz 2CH
| 0| 0| 0| 4K@60Hz 5.1CH
0| | 0| 0| 4K@60Hz 7.1CH
0| 0| | 0| 4K@60Hz HDR 7.1CH
0| 0| 0| | 4K@30Hz 2CH
| | 0| 0| 4K@30Hz 5.1CH
| 0| | 0| 4K@30Hz 7.1CH
| 0| 0| | 4K@30Hz HDR 7.1CH
0| | | 0| 1080p@60Hz 2CH
0| | 0| | 1080p@60Hz 5.1CH
0| 0| | | 1080p@60Hz 7.1CH
| | | 0| 1080i@60Hz 2CH
| | 0| | 1080i@60Hz 5.1CH
| 0| | | 1080i@60Hz 7.1CH
0| | | | 1080p@60Hz HDR 7.1CH
| | | | Auto
Auto :
output a resolution compatible with all displays
RS-232 settings
Baud rate: 9600
Data bits: 8
Stio bits: 1
Parity: 0
I Contrl Commands I Function Descriptions
ES XX On/n
| Turn on the output port, (from right to left are 01, 02) “All” means all ports
ES XX Off/n
I
| Turn off the output port, (from right to left are 01, 02) “All” means all ports
I
Support
For more info or tech support
htt p://www . siig. com/suppo rt
Documents / Resources
| SIIG
04-137A 1 x 8 HDMI Splitter Over Cat6
Extender
[pdf] User Manual
04-137A, 1 x 8 HDMI Splitter Over Cat6 Extender, 04-137A 1 x 8 HDMI Splitter
Over Cat6 Extender, HDMI Splitter Over Cat6 Extender, Splitter Over Cat6
Extender, Over Cat6 Extender, Cat6 Extender
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>