SIIG 04-1375A 1 x 8 HDMI Splitter Over Cat6 Extender User Manual
- June 5, 2024
- SIIG
Table of Contents
SIIG 04-1375A 1 x 8 HDMI Splitter Over Cat6 Extender
Features
- Extends HDMI 4K@60 signals up to 230ft (70m) over CAT6/7 cable
- Support 4K@60Hz YUV 4:4:4, HDR, HDCP 2.2
- Supports one HDMI loop-out on the Transmitter
- Support EDID management
- Support audio extraction & ARC via Tosi ink of Receiver
- HDMI Audio Format PCM2/5.1/7.1, Dolby & DTS 5.1
- Toslink Audio Format PCM2, Dolby & DTS 5.1 Built-in bi-directional IR extend
- Support RS-232 command control
- Lightning Protection, Surge Protection, ESD Protection
Package Contents
- Transmitter
- Receiver x4
- Power adapter DC 12V/2A
- Power adapter DC 5V/2A x4 IR blaster cable
- IR Receiver cable x4
- Terminal block
- Mount kits
- User Manual
Layout
Transmitter (TX)
- Reset BUTTON: Press to restart the device
- IR in Connect with IR receiver extension cable, please make sure the remote control used is within the effective range
- IR out: Connect with the IR blaster extension cable, please get closer to the source device while using
- RJ-45: Connect to Receiver with Cat6 cable
- HDMI LOOP-OUT: Connect to HDMI display
- HDMI INTPUT: Connect to HDMI source
- EDID switch: Please refer to the EDID settings table.
- RS-232: for RS-232 command contra.
- POWER JACK: DC 12V/2A
Receiver (RX)
- Reset BUTTON: Press to restart the device
- Audio switch: Select extract audio from HDMI Input or ARC from TV, for Toslink use.
- RJ-45: Connect to Transmitter with Cat6 cable
- Power/Signal LED: flashes when no HDMI signal is always on when HDMI signal is transmitted.
- POWER JACK: DC 5V/2A
- Toslink Output: For audio extract or ARC use
- HDMI OUTPUT: Connect to HDMI display
- IR in: Connect with IR receiver extension cable, please make sure the remote control used is within the effective range
- IR out: Connect with IR blaster extension cable, please get closer to the source device while using.
EDID settings table
Switch Status
| 1 | 2 | 3 | 4 | EDID Information |
|---|---|---|---|---|
| 0 | 0 | 0 | 0 | 4K@60Hz 2CH |
| 1 | 0 | 0 | 0 | 4K@60Hz 5.1CH |
| 0 | 1 | 0 | 0 | 4K@60Hz 7.1CH |
| 0 | 0 | 1 | 0 | 4K@60Hz HDR 7.1CH |
| 0 | 0 | 0 | 1 | 4K@30Hz 2CH |
| 1 | 1 | 0 | 0 | 4K@30Hz 5.1CH |
| 1 | 0 | 1 | 0 | 4K@30Hz 7.1CH |
| 1 | 0 | 0 | 1 | 4K@30Hz HDR 7.1CH |
| 0 | 1 | 1 | 0 | 1080p@60Hz 2CH |
| 0 | 1 | 0 | 1 | 1080p@60Hz 5.1CH |
| 0 | 0 | 1 | 1 | 1080p@60Hz 7.1CH |
| 1 | 1 | 1 | 0 | 1080i@60Hz 2CH |
| 1 | 1 | 0 | 1 | 1080i@60Hz 5.1CH |
| 1 | 0 | 1 | 1 | 1080i@60Hz 7.1CH |
| 0 | 1 | 1 | 1 | 1080p@60Hz HDR 7.1CH |
1
Auto:
| 1| 1| 1| Auto
Auto:
output a resolution compatible with all displays
RS-232 settings
- Baud rate: 9600
- Data bits: 8
- Stio bits: 1
- Parity: 0
Support
For more info or tech support http://www.siig.com/support.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>