PHOINiKAS ET-9151 2.4G Wireless Gaming Headset Instruction Manual

PHOINiKAS ET-9151 2.4G Wireless Gaming Headset

Product Information

• Product Name: ET-9151(H838)2.4G Wireless Gaming Headset
• Contents in Package:
  • A. Hades Headset – 1PCS
  • B. Transmitter – 1PCS
  • C. TYPE-C to 3.5mm Cable – 1PCS
  • D. Type-C to USB Cable – 1PCS
• Specification:
  • Frequency: 2.4G
  • Product Type: 2403-2477MHz (ISM BAND)
  • RF Range: 10M
  • Charging Voltage: DC 5V 500mA
  • Charging Time: 4h
  • Battery Capacity: 1000mAh
  • Rated Voltage: 3.7V
  • Standby Time: 18h
• Microphone:
  • Drive Unit Dimensions: 6mm * 2.2mm
  • Directivity: Omnidirectional

Product Usage Instructions

Charging

1. Plug the Type C Cable into the charging port on the headset.
2. Plug the other end of the cable into a USB port (DC 5V) for charging.
3. The indicator at the charging port will light up in red to indicate charging.
4. The charging time will be approximately 4 hours.

Pairing

1. Plug the transmitter into the USB port on PC/PS4/PS5 or tablet.
2. The transmitter light will turn on and flash in blue.
3. Press the power button on the headset to turn it on.
4. The power indicator light on the headset will turn on and flash in blue.
5. Press and hold the Volume+ and Volume- buttons on the headset for 3 seconds.
6. The pairing indicator light will turn on and flash in blue.
7. The LED will stay steady on blue after successful pairing.

Wired Connecting
Find the Type C to 3.5mm cable in the package:

1. Plug one end of the cable into the Type C port on the headset.
2. Plug the other end of the cable into the PC port.
3. The headset will connect to the PC automatically.
4. Note: When using the 3.5mm cable, make sure to turn off the power of the headset.

Operation Instructions
Power Button and Microphone Button Functions

• Power ON: Press and hold the power button for 3 seconds. The blue indicator light will turn on and stay on when connected, and it will flash when not connected.
• Power OFF: Press and hold the power button for 3 seconds. The blue indicator light will turn off.
• Microphone ON/OFF: Short press the microphone button to turn off the microphone (beep twice). Short press again to turn on the microphone (beep once). The microphone is turned on by default.

Light Button and 7.1 Sound Channel Function

• Light ON/OFF: Short press the light button to turn off the light. Short press again to turn on the light.
• Switch Sound Effect: Press and hold the light button for 3 seconds to switch between the 7.1 sound effect (beep beep twice) and stereo sound effect (beep once). The stereo sound effect is turned on by default.

Volume + Button Function
Short press or long press the volume + button to increase the volume. A beep sound will be prompted when the loudest sound is reached.

Volume – Button Function
Short press or long press the volume – button to decrease the volume. A beep sound will be prompted when the sound is at its lowest.

Low Power Mode
When the battery power supply voltage is less than 3.35V, an indication tone will beep once every one minute. After 20 minutes, the headset will automatically turn off.

Operation instruction

Hades headset button instructions

1. Volume +
2. Power /MIC button
3. Volume –
4. LED/Virtual 7.1 mode switch button
5. Type-C charging port
6. Indicator for power and pairing
7. Transmitter indicator

Contents in package

• A. Hades Headset ———————————–1PCS
• B. Transmitter ———————————–1PCS
• C. TYPE-C to 3.5mm cable ——————————-1PCS
• D. Type-C to USB cable ——————————- 1PCS

How to charge

Plug Type C Cable to charging port on headset，then the plug another port of cable into USB port(DC 5V) for charging，the indicator at charging port will be light ON in red, the charging time will be 4 hours.

How to pair

1. Plug transmitter into the USB port on PC/PS4/PS5 or tablet,the transmitter light on and flash in Blue.
2. Press power button ,headset turn on, Power indicator light ON and flash in Blue .
3. Press and hold Volume+ and Volume- buttons for 3 seconds,pairing indicator light ON and flash in blue, the LED will steady on blue after pair sucessful .

Wired connecting
Find the type C to 3.5mm cable in the package, plug it to type C port on headset, and plug 3.5mm to PC port, the headset will connect to PC automatically.
( Note: When using the 3.5 cable, you must turn off the power of the headset)

Operation instructions:

1. Power button and microphone button functions:：

2. Power ON：Press and hold the power button for 3 seconds to turn it on, the prompt beep is “beep”, the blue indicator light is on, it is always on when it is connected, and it flashes when it is not connected.

3. Power OFF：Press and hold the power button for 3 seconds to shut down, the prompt beep is “beep”, and the blue indicator light is turned off.

4. Microphone on/off: short press the microphone to turn off, the prompt tone “beep” twice; short press the microphone again, the prompt tone “di” once (the microphone is turned on by default).

5. Light button and 7.1 sound channel function：

6. Short press the light to turn off, short press the light to turn on.

7. Press and hold for 3 seconds to switch the 7.1 sound effect, and the prompt sound “beep beep” twice; press and hold for 3 seconds to switch the stereo sound effect, and the prompt sound “beep” once (by default, the stereo sound effect is turned on)。

8. Volume + button function：
   Short press or long press to increase the volume, and a “beep” sound will be prompted when the loudest sound is reached.

9. Volume – button function：
   Short press or long press to decrease the volume, and a “beep” sound will be prompted when the sound is the smallest.

Low power mode:
When the battery power supply voltage is less than 3.35V, indication tone will beep one time every one minute. After 20 minutes, the headset will turn off.

Specification

• Frequency : 2.4G
• Product type :2403-2477MHz(ISM BAND)
• RF Range : ＞10M
• Charging Voltage: DC 5V 500mA
• Charging Time: ≈4h
• Battery Capacity: 1000mAh
• Rated Voltage : 3.7V
• Standby Time :≈18h

Headset

• Loading Impedance: 32±15% OHMS ( f=1KHz)
• Out Sound Pressure Lever (S.P.L) : 118dB±3dB At 1KHz /0.179V /1mW
• Frequency Response: 20~20KHz (at 1KHz Output S.P.L ±10dB)
• Total Harmonic Distortion: ≦ 5%
• Power Rating: Normal: 20mW ; Maximum : 30mW

Microphone

• Drive Unit Dimensions: φ6mm * 2.2mm
• Sensitivity : -38±3 dB (0dB=1V/Pa.1KHz)
• Directivity: Omnidirectional
• Output Impedance :2.2KOHMS
• Frequency Response: 100~10000Hz (at 1KHz ±3dB)
• Total Harmonic Distortion: ≦ 5%
• S/N Ratio :60dB or More

FCC Rules

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• (1) this device may not cause harmful interference, and
• (2) this device must accept any interference received, including interference that may cause undesired operation

This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the device into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>