TIMEX T200 Silicone Strap Watch User Guide

TIMEX T200 Silicone Strap Watch

EXTENDED WARRANTY

Available in U.S. only. Extend your warranty for an additional 4 years from date of purchase for $5. You can pay with AMEX, Discover, Visa or MasterCard by calling 1 800-448-4639 during normal business hours. Payment must be made within 30 days of purchase. Name, address, telephone number, purchase date, and 5-digit model number required. You can also mail a check for $5 to: Timex Extended Warranty, P…O… Box 1676, Dept. EF, Little Rock, AR 72203.

Please read instructions carefully to understand how to operate your Timex® watch. Your model may not have all of the features described in this booklet.

FUNCTIONS

Real-time calendar clock, Second time zone, Countdown timer, Daily/ weekday/weekend alarm, Hourly chime, 200 Lap Chronograph, Interval Timer,
Review, INDIGLO® night-light with Night-Mode® Feature.

BASIC OPERATION

When setting, each button has a different function as indicated above. Watch face will indicate when button changes function.

TIME/DATE/HOURLY CHIME

1. In TIME mode, press and hold SET/RECALL. Time zone will flash.
2. To set, push + or – to select first or second time zone.
3. Press NEXT. Hour digits flash.
4. Press + or – to change hour including AM/PM. (Scroll through 12 hours to get to AM/PM).
5. Press NEXT. Minute digits flash.
6. Press + or – to change minutes.
7. Press NEXT. Second digits flash.
8. Press + or – to set seconds to zero.
9. Continue pattern to set month, day of month, year, 12-hour or 24-hour time display, MM. DD or DD. MM date format, turn hourly CHIME on/off, turn BEEP on/off… If you select BEEP on, a beep will sound every time you push a button (except INDIGLO®).
10. Press DONE to confirm and exit or NEXT to continue and set second time zone, if desired.
11. When in Time mode, press and hold START/LAP to “peek” at second time zone; hold for 4 seconds to switch time zones.

CHRONO

1. Press MODE until CHRONO appears.
2. Press and hold SET/RECALL.
3. The Display will read: FORMAT/SET, then select LAP/SPL or SPL/LAP options.
4. Press + or – to select desired format,
5. Press DONE to confirm and exit,
6. To use chrono, press START/LAP, Chrono continues to run even if you exit the mode…
7. Press STOP/RESET to stop chronograph from running OR while chrono is running, press START/LAP to take a split, Lap and split times will then be displayed in the format you selected, The lap number will alternate with the last two digits of the bottom line.

NOTES:

• Lap and split times will appear frozen for 10 seconds, Press MODE to release the display and see running chrono.

INTERVAL TIMER

Single simple Interval Timer with four segments: Warm Up, Interval 1, Interval 2, Cool Down.

To set:

1. Press MODE until INTTMR appears.
2. Press SET/RECALL, wait for WARMUP to flash.
3. Press NEXT. Hour digits flash. Press + or – to change hours.
4. Press NEXT. Minute digits flash. Press + or – to change minutes.
5. Press NEXT. Second digits flash. Press + or – to set seconds.
6. Press NEXT to proceed to INT 1. Then follow steps 3-5 to set.
7. Complete setup of INT2 & COOL using steps 3-5.
8. Press NEXT to confirm and exit.
9. Press START/LAP to start Interval Timer.

NOTES:

• When first countdown is complete, Timer proceeds to the next non-zero interval that is set. INDIGLO® night-light flashes and beep sounds between each interval.
• If you set both Timers in Interval Timer to repeat, Timer will countdown both intervals and then repeat entire sequence.
• Press and hold STOP/RESET to reset Interval Timer.

TIMER

1. Press MODE repeatedly until TIMER appears.
2. Press SET/RECALL. Hour digits flash.
3. Follow same pattern as setting TIME and ALARM to set hours, minutes, seconds, and select between REPEAT/AT END (timer counts down and then repeats) or STOP/AT END (the timer counts down and then stops).
4. Press DONE to confirm and exit.
5. Press START/LAP to start TIMER. Timer will continue to run even if you exit Timer mod If REPEAT/END selected will flash… If STOP/END selected will flash.
6. An alarm melody will chime when the timer has reached zero or before it starts to count down again.
7. Press STOP/RESET to stop TIMER. Press again to reset to countdown time.

REVIEW

1. Press MODE until REVIEW displays.
2. Press START/LAP to select a workout to view, and then press SET to view the data for that workout.
3. Press + and – to scroll through the workout data…
4. Press SET to go back to the list of saved workouts…
5. Press MODE to exit.

NOTES:

• Press and hold SET to clear workout memory.

ALARM

• Setting the ALARM is similar to setting TIME.

1. Press MODE repeatedly until ALARM appears.
2. Press SET/RECALL to set alarm.
3. Hour digits flash. Press + or – to change hour.
4. Press NEXT. Minute digits flash, Press + or – to change minutes.
5. Press NEXT. If in 12-hour format, AM/PM flashes. Press + or – to change.
6. Press NEXT. Press + or – to select DAILY, WEEKDAYS OR WEEKENDS.
7. Press DONE to confirm and exit.
8. Press START/LAP or STOP/RESET to arm or disarm alarm, When disarmed, OFF will be displayed, When armed, the alarm clock icon will appear .
9. The INDIGLO® night-light and alarm icon flashes and an alert sounds when the alarm goes off… Press any button to silence… A back up alarm will sound after five minutes if you don’t press any buttons…

INDIGLO® NIGHT-LIGHT/NIGHT MODE® FEATURE

Press INDIGLO® button to activate night-light. Electroluminescent technology used in INDIGLO® night-light illuminates entire watch face at night and in low light conditions. While the night-light is on pressing any button keeps it on for three seconds.

Press and hold INDIGLO® button for 4 seconds to activate NIGHT MODE® feature. Moon icon will appear… Once activated, any button pushed will cause INDIGLO® night-light to stay on for 3 seconds. NIGHT-MODE® feature will stay activated for 8 hours or until deactivated by pressing and holding INDIGLO® button again for 4 seconds.

WATER RESISTANCE

If your watch is water-resistant, meter marking or ( ) is indicated…

Water-Resistance Depth

| p.s.i.a. * Water Pressure Below Surface
---|---
30m/98ft|

60

50m/164ft

| 86
100m/328ft|

160

*pounds per square inch absolute

WARNING: TO MAINTAIN WATER-RESISTANCE, DO NOT PRESS ANY BUTTONS UNDER WATER.

1. Watch is water-resistant only as long as lens, push buttons and case remain intact.
2. Watch is not a diver watch and should not be used for diving.
3. Rinse watch with fresh water after exposure to salt water.

BATTERY

Timex strongly recommends that a retailer or jeweler replace battery. Battery type is on watch back. If present, push/short internal reset switch after replacing battery. Battery life estimates are based on certain assumptions regarding usage; battery life may vary depending on actual usage.

DO NOT DISPOSE OF BATTERY IN FIRE. DO NOT RECHARGE. KEEP LOOSE BATTERIES AWAY FROM CHILDREN.

TIMEX INTERNATIONAL WARRANTY

https://www.timex.com/productWarranty.html

Register your product at https://www.timex.com/product- registration.html

©2020 Timex Group USA, Inc. TIMEX, INDIGLO and NIGHT-MODE are
registered trademarks of Timex Group and its subsidiaries.

Documents / Resources

| TIMEX T200 Silicone Strap Watch [pdf] User Guide
T200 Silicone Strap Watch
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>