Samsung SSD T7 Portable external solid-state drive

DISCLAIMER

SAMSUNG ELECTRONICS RESERVES THE RIGHT TO CHANGE PRODUCTS, INFORMATION AND SPECIFICATIONS AT ANY TIME WITHOUT NOTICE.
Information in this document is provided in connection with products of Samsung Electronics Co. Ltd.
(“Samsung”). Product descriptions and specifications contained in this document are for reference
purposes only. All information discussed in this document may change at any time, without notice, and
is provided on an “AS IS” basis, without warranties of any kind. This document and all information
discussed in this document remain the sole and exclusive property of Samsung. No license of any patent, copyright, mask work, trademark or any other intellectual property right is granted by this
document, express or implied, by estoppels or otherwise. Except as provided in Samsung’s terms and
conditions of sale for such products, Samsung disclaims any express or implied warranty, relating to sale and/or use of Samsung products, including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Samsung products are not intended for use in life support, critical care, medical, safety equipment, or similar applications where product failure could result in loss of life or personal or physical harm, or any military or defense application, or any governmental procurement to which special terms or provisions may apply. For updates or additional information about Samsung products, contact your local Samsung store or visit Samsung website (https://www.samsung.com). Samsung and Samsung logos are registered trademarks of Samsung Electronics Co., Ltd. or its affiliates in the United States and other countries. Other names and brands may be claimed as the property of others.
Copyright © 2020, Samsung Electronics Co., Ltd. All rights reserved.

Introduction

Samsung T7 is a superfast external storage device that has convenient data protection.

Transfer in a flash

Transfer massive files within seconds with the incredible speed of USB 3.2 Gen2 on the T7. The embedded PCIe NVMe technology facilitates sequential read/write speeds of up to 1,050/1,000 MB/s, respectively.
Built strong and safe
SSD stands for Solid State Drive, which means it’s built with no moving parts. A sturdy metal body encases the immobile hardware, keeping your data intact from falls of up to 2 meters. And the T7 is confidently backed by a 3-year limited warranty.

• The internal free fall shock test was conducted under controlled conditions.

Compact Portability

The T7’s pocket-sized and slim design allows consumers to conveniently carry and access data anywhere. The sleek and slim design of its aluminum metal case offers enhanced durability and mobility. The T7 has a lightweight metal body (58g), which is approximately the same weight as an egg. Also, it is slim as thin as a pencil. With this compact and slim design, the T7 is available in up to 2TB.

Thermal Reliability

The T7 integrates the latest thermal management technologies. It safeguards user data and avoids low-temperature burns by maintaining optimal operating temperatures via DTG (Dynamic Thermal Guard) and EPCM (encapsulated Phase Change Materials). The DTG technology minimizes overall heat generation, automatically maintaining ideal operating temperatures to safely use the device. The EPCM– a substance that protects your T7 from overheating by absorbing excess heat and releasing it gradually when it changes its phase. In addition, the T7 is protected by a 3-year limited warranty.

Management software

The T7 comes embedded with upgraded software for PCs and Macs to help you set up a password and get the latest firmware updates. You can also download the mobile app for Android smartphones and tablets.
Multi-device compatibility
Access your files anytime, anywhere. The T7 is compatible with PC, Mac, Android devices, gaming consoles, and more. Included in the box are USB Type C-to-C and Type C-to-A cables for added convenience.

• Compatibility with host devices may vary. Please find the compatible devices list on www.samsung.com/support.  

Getting Started

Before using the Samsung Portable SSD T7 (referred to as “T7”), please read this User
Manual thoroughly so that you may know how to use the product in a safe and appropriate manner.

What’s In the Box

• Samsung Portable SSD T7
• USB 3.2 Gen 2 USB C to A cable
• USB 3.2 Gen 2 USB C to C cable
• Quick Start Guide & Warranty Statement

How to Connect / Disconnect

1. Select the cable compatible with your device. Connect one end of the cable to the device and the other end to the T7.
2. Always use “Eject”, “Unmount” or “Safely Remove Hardware” when disconnecting the T7 to protect your data.

System Requirements

1. USB 3.2 Gen 2 (10 Gbps) Interface Support
   USB (Universal Serial Bus) is a serial input/output interface standard for connecting various devices. T7’s data transfer speed is optimal with USB 3.2 Gen 2 (10 Gbps) and using lower versions such as USB 3.2 Gen 1 (5Gbps), USB 2.0 and 1.1 may result in lower performances due to interface limitations inherent in such lower versions.

• Performance may vary depending on user’s system to which T7 is connected. Even when using USB 3.2 Gen 2 connections, T7 may not perform well if your system does not support UASP (USB Attached SCSI Protocol). Please make sure that your system supports UASP. 2. Operating System Requirements

  • Windows OS: Windows 7 or higher
  • Mac OS: Mac OS X 10.10 or higher
  • Android: Android Lollipop or higher
  3. File Formats
     T7 is pre-formatted in using exFAT file system which is supported by Windows OS, Mac OS, and Android operating systems. Whether data formatted to a certain format may be read or written to your computer vary depending on the OS, as specified in the table below. If you use T7 on a single OS, it is recommended that you format the T7 using the appropriate file format for that OS. (e.g.) Read/write restrictions for file systems by each operating system.File Formats| Windows OS| Mac OS
     ---|---|---
     exFAT| Both read and write| Both read and write
     NTFS| Both read and write| Read only
     HFS| Not recognizable| Both read and write

• When using exFAT across multiple operating systems, data writing may become locked and you may only be able to read data. If such problem occurs, you can restore write access by following the instructions below.

  * Mac OS: Connect T7 to your Mac again, and perform Eject.
  * Windows OS: When the notice pops up saying that write access is disabled, click “Scan and fix” to perform Check Disk (CHKDSK). If you did shut down the notice without performing Check Disk, you may do it by selecting the drive → Right-click → Properties → Tools → click Check.

Capacity of T7 Displayed on the System

The capacity reported by the system to which T7 is connected may differ from the labeled capacity, due to the difference between the decimal and binary systems of
measurement and other factors including the drive’s partitioning and blocking.

• e.g.: Windows OS: 1 GB = 1,024MB, Mac OS: 1GB = 1,000MB

Labeled capacity uses decimal system and is convertible as below:
1 GB=1,000,000,000 bytes, 1 TB=1,000,000,000,000 bytes
Lower capacity may be demonstrated by your computer due to use of a different measurement standard.

Using T7

Connecting T7

Select the cable compatible with your device. Connect one end of the cable to the device and the other end to the T7 .

Disconnecting T7
Be sure to use Safely Remove Hardware feature for every disconnection of T7 . Unplugging from computer without performing Safely Remove Hardware feature may cause data losses or damages to the T7 .

• Samsung shall not be liable for loss of user data or product damages caused by user’s failure to comply with this instruction.
  Installing Samsumg Portable SSD Software 1.0
  (For Security Mode and Firmware update)

For PCs and Macs

In the Explorer (Windows OS) or Desktop (Mac OS), select the “Samsung Portable SSD 1.0” application.
Windows OS: SamsungPortableSSD_Setup_Win_1.0.exe
Mac OS: SamsungPortableSSD_Setup_Mac_1.0.pkg

• If you format partition of the T7 after purchase, Samsung Portable SSD Software stored in the drive will
  be deleted. In such case, please download the “Samsung Portable SSD Software 1.0” application from
  Samsung website (http://www.samsung.com/samsungssd).

• Samsung Portable SSD Software 1.0 is only for T7 Touch and T7, so installation of Samsung Portable SSD Software 1.0 will not automatically remove Samsung Portable SSD Software (previous version), if remaining in your computer, which was designed for T3, T5, X5.

1. Running Samsung Portable SSD Software 1.0
   Select “Samsung Portable SSD Software 1.0” application icon on Desktop.

• In case of Mac OS, Samsung Portable SSD Software 1.0 may not operate without device (driver) enabled. 2. Setting Security Mode (Optional)
  Security mode is optional. You may use T7 without security/update feature enabled. Please follow the instructions that appear on each screen of the Samsung Portable SSD Software 1.0. Once you agree to the terms and conditions of the Samsung Portable SSD Software 1.0 while it is being installed, you can set a password through the following steps. (Certain elements of Samsung Portable SSD Software 1.0 will be installed on the user’s computer for security mode.)

  * **Security mode off**  

  You may use T7 without security mode.

  *  **Security with Password**  

  You may enable security mode with password. Use T7 without security mode. If the password is forgotten, you need to have T7 to be restored to factory setting through online service rendered by our customer service centers. Please keep it in mind that all user data placed in T7 will be lost by factory reset. Please be cautious not to forget your password.

  * Samsung shall not be liable for loss of user data caused by forgotten or stolen passwords. In an effort to keep the device as secure as possible, there is no password recovery option. If the password is forgotten, users need to have T7 to be restored to factory setting through online service rendered by our customer service centers. Please keep it in mind that all user data placed in T7 will be lost by factory reset. Please be cautious not to forget your password.
  * Only Mac OS, “Samsung Portable SSD 1.0” driver is required for the security functionality. If the kernel extension is not installed, complete the installation by following the sequence on the package installation. Once installed, disconnect and reconnect T7 to confirm that the installation was successful.
  * Only Mac OS, “Samsung Portable SSD 1.0” driver and some of 3rd party drivers, including  

  SATSMARTDriver are mutually exclusive. If you wish to work with SATSMARTDriver, please remove Samsung Portable SSD driver and install SATSMARTDriver as following instruction.

  • When both Samsung Portable SSD Driver and SATSMARTDriver are installed and conflict is detected, the instructions like the following will be available:
  • How to remove Samsung Portable SSD Driver and install SATSMARTDriver

    • sudo kextunload /Library/Extensions/SamsungPortableSSDDriver.kext

    • sudo kextload /Library/Extensions/SATSMARTDriver.kext

  • How to remove SATSMARTDriver and install SamsungPortableSSDDriver

    • sudo kextunload /System/Library/Extensions/SATSMARTDriver.kext

    • sudo kextload /Library/Extensions/SamsungPortableSSDDriver.kext

Unlock

If you’ve enabled security mode, every time you connect T7 to your computer you need to enter your password and click the “UNLOCK” button before getting access to the data in T7 . If you fail to unlock, your access will be confined to capacity of about 128MB allocated to SamsungPortableSSD_1.0.exe and SamsungPortableSSD_1.0.app, which means that you will be locked out of the data protected.

• Depending on the user environment, the “SamsungPortableSSD Software 1.0” may not be executed automatically. In such case, please double-click the “SamsungPortableSSD Software 1.0” icon in Explorer on Windows or the Desktop on Mac.
• Security mode may be supported by certain version of each OS (or higher) only. Please check whether your OS meets the system requirements and supports security mode.
• If security mode is enabled, only the capacity of security partition in the T7 will be initially displayed. This security partition is approximately ~128 MB. Once you enter your password and unlock successfully, the full capacity of T7 will be displayed in your system.
• You may choose another Samsung Portable SSD by clicking T7 ’s name on left panel. Samsung Portable SSD Software lists the entire host devices (up to 6) to which Samsung Portable SSD is connected.

Change in Settings
You can change your security mode/user name/password settings of the T7 by clicking “SETTINGS” button on the main page. When using a computer without the security software, you can download installation file
(“SamsungPortableSSD_Setup_Win_1.0.exe” for Windows OS,
“SamsungPortableSSD_Setup_Mac_1.0.pkg” for Mac OS) from the Samsung website (http://www.samsung.com/samsungssd) and install it to change the settings.

• Security Mode
  For making a change in security mode between ON and OFF, please click toggle button and enter correct password. Refer to the table below for a description of T7 security status indicator.Status| Description
  ---|---
  |

Locked

| This signifies that security mode is on, but user has not unlocked T7 . You can unlock T7 on unlock page.
|

Unlocked

| This signifies that security mode is on and user has already unlocked T7 . You can see the storage capacity on main page and change settings.

No icon

|

Security mode OFF

| This is when security is OFF. You can see the storage capacity on main page and change settings.

• Name/Password
  You can change Name and Password. For changing password, please click “CHANGE” button.

5. Update Software and Product firmware

• If your computer is connected to the internet, the number of Software/Firmware updates available will show on the bottom of left panel.
• By clicking “UPDATE” button ( ), you may go to update page.
• By clicking “UPDATE” button ( ), you can download the latest software “SW”) or firmware (“FW”) and update it.
• By clicking “Check for Update Automatically” toggle button  ), you can choose whether to have SW and FW automatically updated whenever Samsung Portable SSD is connected.
• By clicking refresh button ( ), you can refresh update status.
• By clicking arrow down button ( ), you can see detail information on the applicable update.

When user changes “Check for Update Automatically” from OFF to ON, SW does not refresh update
information immediately. Update information is refreshed when either user clicks refresh button or Samsung Portable SSD is connected to the computer.
For FW updates, security mode needs to be OFF. Any access to T7 , including copying/deleting
/formatting partition, while FW is being updated, may cause abnormal behavior of or damage to the T7 .
Once FW has been updated, please disconnect and reconnect T7 to ensure that the FW update was successful.

Delete “Samsung Portable SSD Software”

Deleting software on each OS

Windows OS

|

If user installed SW using SamsungPortableSSD_Setu p_Win_1.0.exe

| Software can be uninstalled via “Uninstall or change a program”. Go to Control panel → Programs → Programs and Features → Uninstall or change a program → Double-click “Samsung Portable SSD Software 1.0” and select “Yes”

If user installed SW using SamsungPortableSSD_1.0.ex e

| Software need to be deleted manually by executing PSSD_Cleanup.bat in application installation path. (Normally C:\Program Files(x86)\Samsung\Portable_SSD\PSSD_Cle anup.bat)

Please refer to FAQ in the Samsung website (http://www.samsung.com/samsungssd) for more details.

Mac OS

| Application needs to be deleted manually by executing CleanupAll.scpt in SW installation path. (Normally #osascript ~/Library

/ApplicationSupport/Portable_SSD/CleanupA ll.scpt)

*Third party cleaner such as AppCleaner may not delete “Samsung Portable SSD” SW completely.

Please refer FAQ in the Samsung website (http://www.samsung.com/samsungssd) for detail information.

Default language may be selected under Regional Setting.

For Android devices

1. Download Application from Google Play Store
   You may download “Samsung Portable SSD 1.0” application from App store.

2. Running the Application
   Please run the Application installed.

3. Setting Security Mode
   Password stored in T7 after connection on the computer can also be used in Android.

   • Samsung shall not be liable for loss of user data caused by forgotten or stolen passwords. In an effort to keep the device as secure as possible, there is no password recovery option. If the password is forgotten, users need to have T7 to be restored to factory setting through online service rendered by our customer service centers. Please keep it in mind that all user data placed in T7 will be lost by factory reset. Please be cautious not to forget your password.

4. Unlock T7
   If you’ve enabled security mode, every time you connect T7 to your device, you need to enter your password and press the “UNLOCK” button before getting access to the data in T7.

5. Home Screen
   If security mode is not enabled in your T7, you can enter to Setting screen by clicking “SETTINGS” button in the main page.

6. Settings Screen
   You can change the user name or password and turn ON/OFF security mode.

7. Update SW and FW
   To enter the update screen, click the Update page button ( ) on Home screen. If any update is available, the “UPDATE” button ( ) will be highlighted. If there is an application to be updated, your clicking UPDATE button will show the link to ‘App store’.

   • Firmware update requires connection to computer.

8. Deleting “Samsung Portable SSD” Application on Android
   Open your android device’s Settings app and tap Apps or Application manager. Tap “Samsung Portable SSD” and uninstall.

9. Select Default Language
   Default language may be selected under Android system language setting.

   • Path: Android apps – Settings – Language

Caution

Failure to follow the instructions and cautions in each section of this manual may result in injury, damage to the product or data loss. Please read thoroughly before using the product.

Back Up Important Data

No computer system can be absolutely secure. Samsung does not provide any kind of guarantee and/or warranty against data loss on the T7 under any circumstances. Samsung disclaims any and all liabilities for emotional distress and/or physical and/or monetary damages or losses of any kind caused by loss and/or restoration of data stored on the T7. Be sure to back up important data at all times.

Safeguard User Password

Because T7 utilizes advanced encryption technologies, user data cannot be accessed if password is lost or forgotten. Please write down your password and store it in a safe place. If the product cannot be used due to user’s failure to enter correct password, the only way to restore product is to have it reset to factory settings via an online service by a Samsung Service Center. However, restoring the device to factory settings will result in a complete loss of all user data. Please be sure to backup important data on a regular basis.

Connect to Certified Devices; Compliance with Safety Standards

This product has been designed to comply with power consumption limitations according to safety standards. Please use devices and interface ports that comply with related standards.

Avoid Shock, Vibration

• Please have the product avoid any strong shock or vibration that may cause malfunction or data loss.
• Do Not Disassemble, Damage, or Remove Label
• Do not disassemble the product or damage or remove the stickers or labels on the product. If the product has been disassembled, damaged, or if the label has been removed by the user, all warranties will be void. For the purpose of repairs, please contact a Samsung Service Center only or such other service providers designated by Samsung.

Use Genuine Accessories
Always use genuine parts and accessories certified by Samsung. Samsung shall not be liable for damages to the product or loss of user data caused by use of non-genuine parts or accessories.

Use in Appropriate Temperature and Humidity
Use the product in appropriate environment: temperature between 5°C – 35°C and humidity between 10 – 80%.

Use No Excessive Force in Unplugging the Cable
Do not pull or unplug the cable using excessive force. It may cause an unstable connection or damage to the connector.

Perform Virus Scans and Updates

Please follow the following safety guidelines to prevent virus infections.

• Install an anti-virus program on the computer to which the T7 is connected, and perform virus scans on a regular basis.
• Always update the operating system and the anti-virus software with the latest version.
• After downloading files to the T7 perform a virus scan before opening the file.

Clean the Product

It is recommended that you clean the product by wiping gently with a soft cloth. Do not use water, chemical substances or detergent. They may cause discoloration or
corrosion in the product’s exterior, and may also cause fire or electric shock.
Keep Away from Children, Infants and Animals
Small parts pose risk of suffocation. Please keep the product away from children, infants or animals to prevent them from putting the product or parts in the mouth.

FAQ

I cannot run the Samsung Portable SSD Software 1.0.

| The Samsung Portable SSD Software 1.0 can only run on certain OS versions (or newer).

Please see below for supported OS versions:

Ÿ  Windows OS: Windows 7 or higher

Ÿ  Mac OS: Mac OS X 10.10 or higher

---|---

The “USB storage unexpectedly removed” message appears on the status bar of my mobile device.

| In order to use the Samsung Portable SSD Software 1.0, permission to access the USB device is required. This message appears when the access permission is removed from the mobile device. When you launch the mobile Samsung Portable SSD app, you can use the T7 normally again.

When I connect the T7 to devices other than a PC, they do not recognize the T7 .

| The T7 was developed for use with Windows OS and Mac OS PCs and mobile devices. When connected to devices other than those, the T7 may not be recognized or use of its features may be restricted depending on their level of support. Moreover, if you have enabled security mode with Password, you cannot enter your password from non-PC or non-mobile devices and thus will be unable to access data stored on the T7. Please disable the security mode before using the T7 with such devices.
I have lost my password. Can I disable security mode?| No, you cannot. If you lose your password, you cannot disable the security mode. Therefore, make sure not to lose it.

My T7 is not recognized by devices.

| Please make sure that the T7 is connected securely to the USB port.

Ÿ Some PCs may not recognize the T7 when connected to the USB 2.0 port if the current exceeds the maximum limit (500 mA) described in the Power Specifications. In such cases, please try a different USB port.

Ÿ If you use cables other than the one included in the product package, the T7 may not be recognized.

If the T7 is correctly connected but still not recognized by devices, find the Service Centers specified in the User Manual or on the Samsung website (http://www.samsung.com), and make an inquiry.

Product Specifications and Certifications

Product Specifications

or higher; or Android Lollipop (version 5.1) or higher

• Max data transfer speed is measured based on Samsung’s internal testing standards with the enclosed
  USB cable. Performance may vary depending on host configuration. To reach maximum transfer speeds of 1,050 MB/s, the host device and connection cables must support USB 3.2 Gen 2 and UASP mode must be enabled.

Regulatory Compliance

KC (Korea Certification)
Identification Symbol: Refer below
Name: Samsung Electronics Co., Ltd.
Manufacturer / Manufacturing Country: Samsung Electronics Co. Ltd / Republic of Korea Manufacturing Year and Month: Marked separately
Rating / Model: Refer below
Manufacturer: SAMSUNG Electronics Co. Ltd.

This EMC compliant (Class B) device for homes is intended for use in domestic environment and can be used in any region.

FCC (Federal Communication Commission)

United States Federal Communication Commission (FCC) regulations
Note that any alteration or modification, not authorized expressively by the party responsible for compliance to regulations, may result in voiding user’s authority to operate the device.
This equipment has been tested and verified to comply with FCC CFR Part 15, Restrictions on Class B Digital Devices.
These restrictions are implemented to prevent the emission of harmful electronic magnetic waves when device is used in residential environments. This device generates, uses and emits radio frequency energy, and may cause harmful radio interference to wireless communications if not installed and used according to the guideline. However, it does not guarantee absence of radio interference in certain installed environments. If harmful radio interference occurs to a radio or TV reception when the device is turned on or off, the user must prevent such interference through one of the following measures.

• Adjust direction of or relocate reception antenna
• Increase distance between the device and the receiver
• lug receiver and device on outlets on separate circuits
• Seek assistance from qualified radio/TV technicians or retailer
• This device complies with Part 15 of FCC regulations
• This device does not cause electromagnetic interference
• If any interference is received, including interference that may cause operational problems to the device, it may be operated on two conditions that ensure normal operation. This product was designed for indoor-use only.

FCC Notice: Note that any alteration or modification, not authorized expressively by the party responsible for compliance to regulations, may result in voiding the user’s authority to operate the device.
Unique Identifier: Check the label on the product
Responsible Party: Samsung Electronics America QA Lab
19 Chapin Rd. Building D Pine Brook NJ 07058
Tel: 1-973-808-6362, Fax: 1-973-808-6361

CE (Conformity European)

Hereby declares that this/these product(s) is/are in compliance with the essential requirements and other relevant provisions of Directive 2014/30/EU, 2014/35/EU and 2011/65/EU.
In door use only.
EU Compliance Contact information
Samsung Service PO Box 12987, Dublin, Ireland

WEEE (Waste Electrical and Electronic Equipment)

This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

Innovation, Science and Economic Development Canada
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
ICES‑003 Compliance Label
CAN ICES-3 (B)/NMB-3(B)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>