LENOXX CD7400N Stereo 3CD Mini Hi-Fi System Instruction Manual

: June 5, 2024
: lenoxx

Table of Contents

IMPORTANT SAFETY INSTRUCTIONS
LOCATION OF CONTROLS
LISTENING TO RADIO
PLAYING COMPACT DISC
MORE FEATURES
BUTTON DESCRIPTION
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CD7400N Stereo 3CD Mini Hi-Fi System
Instruction Manual

**MODEL NO: CD7400N
STEREO 3CD MINI HI-FI SYSTEM WITH AM/FM RADIO, CASSETTE, AND TURNTABLE

**

INSTRUCTION MANUAL Please read and retain these instructions for future reference.

V.3-2021

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.
This symbol is intended to alert you to the presence of uninsulated dangerous voltage within the product’s enclosure that might be of sufficient magnitude to constitute a risk of electric shock. Do not open the product’s case.
This symbol is intended to inform you that important operating and maintenance instructions are included in the literature accompanying this product.

IMPORTANT SAFETY INSTRUCTIONS

Careful attention is devoted to quality standards in the manufacturing of your CD7400 & CD7400B, and safety is a major factor in its design. However, safety is also your responsibility. This section lists important information that will help you properly use and enjoy your CD7400 & CD7400B and accessories. Read all the included safety and operating instructions before using your CD7400 & CD7400B follow them closely, and retain them for future reference.
Heed Warnings:
Follow all warnings on the product and in the operating instructions.
Cleaning:
Unplug this product from the wall outlet before cleaning. Use only a damp cloth for cleaning. Do not use liquid or aerosol cleaners.
Attachments: Do not use attachment accessories not recommended by the product manufacturer, as they might create a hazard. Water and Moisture:
Do not use this product near water (for example, near a bathtub, washbowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool).
Caution:
Do not place this product on an unstable stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product.
Ventilation:
Slots and openings in the cabinet provide ventilation, ensure reliable operation, and protect from overheating. Do not block or cover these openings, and do not place the product on a bed, sofa, rug, or another similar surface. Do not place the product in a built-in installation such as a bookcase or rack unless it provides proper ventilation.
Power Sources:
Operate this product using only the power source indicated on its marking label. If you are not sure of your home’s power type, consult your product dealer or local power company.
Power Cord Protection:
Route power cords so they are not likely to be walked on or pinched by items placed on or against them. Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.
Non-use Periods:
Unplug the product’s power cord when you will not use it for extended periods.
Lightning:
For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods, unplug it from the wall outlet. This will prevent damage to the product due to lightning and power surges.
Overloading:
Do not overload wall outlets, extension cords, or integral convenience receptacles, as this can result in a risk of fire or electric shock.
Object and Liquids:
Never push objects of any kind into this product through openings, as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
Servicing:
Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
Damage Requiring Service:
Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

When the power cord or plug is damaged.
If liquid has been spilled on, or objects have fallen into the product.
If the product has been exposed to rain or water.
If the product does not operate normally by following the operating instructions, adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation.
If the product has been dropped or damaged in any way.
When the product exhibits a distinct change in performance.
Please refer to the product warranty card (included).

Replacement parts:
When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
Safety Check:
Upon completion of service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.
Heat:
The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.
Connection:
Make sure before starting connecting the unit to any extras, the power cord must be disconnected from the A/C 240 Volts power outlet. This avoids electric shock or other hazards.
Laser:
Do not open, the CD lid or remove the cabinet cover. Exposure to a laser may cause damage to eyesight.

LOCATION OF CONTROLS

LCD DISPLAY
REMOTE SENSOR
STANDBY LED INDICATOR
POWER BUTTON
MUTE BUTTON
FM MODE / DUBBING SPEED SELECTOR
MEMORY / CLOCK ADJUST BUTTON
SLEEP / TIMER BUTTON
DISC CHANGE BUTTON
RANDOM / M-DN BUTTON
HEADPHONE JACK
REPEAT / M-UP BUTTON
DECK 1 CONTROL KEY
RECORD KEY
PLAYBACK KEY
REWIND KEY
FAST FORWARD KEY
STO/EJECT KEY
PAUSE KEY| 14) DISC 1,2,3 SELECTOR
CD DOOR
PRE-SET EQ BUTTON
CD STOP BUTTON
CD PLAY / PAUSE BUTTON
VOLUM UP-DOWN BUTTON
SKIP / SEARCH / TUNING UP BUTTON
SKIP / SEARCH / TUNING DOWN BUTTON
EXTRA BASS CONTROL BUTTON
FUNCTION KNOBS
DECK 2 CONTROL KEYS
CD DOOR OPEN/CLOSE BUTTON
SPINDLE ADAPTOR
33/45/78 RPM SPEED SELECTOR
PICK-UP HOLDER
FM MODE / BEAT CUT 1-2 SELECTOR
SPEAKER WIRE TERMINAL
AUTO STOP SWITCH
FM WIRE ANTENNA
AC POWER CORD
---|---

CAUTION: USAGE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. THIS UNIT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE PERSONNEL.
IMPORTANT: SINCE MOVEMENT OF THE CD MECHANISM AND THE SENSITIVE CIRCUITY MAY CAUSE INTERFERENCE TO THE RADIO TUNER NEARBY, SWITCH THIS UNIT OFF WHILE OPERATING OTHER RADIO DEVICES.
PRECAUTIONS FOR USE
INSTALLATION

UNPACK ALL PARTS AND REMOVE PROTECTIVE MATERIAL.
DO NOT CONNECT THE UNIT TO THE MAINS BEFORE CHECKING THE MAINS VOLTAGE AND BEFORE ALL OTHER CONNECTIONS HAVE BEEN MADE.
DO NOT COVER ANY VENTS AND MAKE SURE THAT THERE IS A SPACE OF SEVERAL CENTIMETERS AROUND THE UNIT FOR VENTILATION.

CONNECTION

CONNECT THE POWER CORD TO AC OUTLET.
WHEN YOU FIRST PLUG THE UNIT INTO THE MAINS, THE UNIT WILL GO INTO STANDBY MODE.
CONNECT THE SPEAKER WIRE TO THE SPEAKER TERMINAL LOCATED ON THE REAR SIDE OF THE UNIT.
TURN ON THE POWER AND SELECT THE ” CD ” FUNCTION. IF THE LCD DISPLAY IS ON WITH BACKLIGHTING, IT MEANS THE POWER SUPPLY IS NORMAL. NOW YOUR SYSTEM IS READY TO PLAY THE MUSIC.

SETTING THE CLOCK

SET UNIT IN STANDBY MODE.
PRESS THE “MEM/CLK-ADJ” BUTTON, AND THE FIRST SECOND DIGIT OF “00” IS FLASH. PRESS OR BUTTON TO SET THE CORRECT HOUR. PRESS THE “MEM/CLK-ADJ” BUTTON TO STORE THE CORRECT HOUR.
THE THIRD & FOURTH DIGIT OF “00” IS FLASHING, PRESS THE OR BUTTON TO SET THE CORRECT MINUTES. PRESS “MEM/CLK-ADJ” TO STORE THE CORRECT MINUTE.
TO SELECT 12/24-HOUR DISPLAY MODE, HOLD THE ” STOP ” BUTTON REPEATEDLY TO CHANGE MODE.

LISTENING TO RADIO

MANUAL TUNING

PRESS THE “TUNER/BAND” BUTTON AND SELECT THE DESIRED BAND (AM OR FM).
TUNE TO THE REQUIRED STATION BY PRESSING THE TUNING “+” OR “-” BUTTON.
ADJUST VOLUME CONTROLS TO THE DESIRED VOLUME LEVEL.

AUTO TUNING

PRESS THE “TUNER/BAND” BUTTON AND SELECT THE DESIRED BAND (AM OR FM).
PRESS AND HOLD THE TUNING “+” OR “-” BUTTON FOR 1-2 SECONDS AND THEN RELEASE
THE UNIT WILL START SEEKING AUTOMATICALLY AND STOP UNTIL A RADIO STATION IS REACHED.
REPEAT STEPS 3 & 4 UNTIL THE DESIRED RADIO STATION IS BEING REACHED.
ADJUST VOLUME CONTROLS TO THE DESIRED VOLUME LEVEL.

PRESET STATIONS
YOU CAN STORE UP TO A TOTAL OF 20 RADIO STATIONS IN THE MEMORY.

SET TO RADIO MODE
TURN TO THE DESIRED RADIO STATION BY ” MANUAL” OR “AUTO” TUNING METHOD.
PRESS THE “MEM/CLK-ADJ” BUTTON TO ENABLE THE PROGRAM STATE.
PRESS THE “REPEAT/M-UP” BUTTON TO SELECT THE DESIRED STATION MEMORY FOR STORAGE.
PRESS THE “MEM/CLK-ADJ” BUTTON AGAIN TO CONFIRM THE SETTING.
REPEAT STEPS 2 TO 5 TO STORE OTHER STATIONS.
PRESS THE “M-UP” OR “M-DN” BUTTON TO SELECT THE PRESET STATIONS IN ORDER.
TO RETURN TO NORMAL TUNER MODE, LEAVE KEYS FREE.
THERE ARE 5 SECONDS FOR THE PROGRAM TO STATE, AFTER 5 SEC. THIS STATE WOULD RELEASE TO NORMAL TUNER MODE AUTOMATICALLY. YOU CAN OVERWRITE A PRESET STATION BY STORING ANOTHER FREQUENCY IN ITS PLACE.

FM & FM-STEREO RECEPTION

SET THE FM MODE SELECTOR AT THE “MONO” POSITION. PROGRAMS ARE RECEIVED IN MONO MODE. PARTICULARLY WHEN STEREO SIGNALS ARE WEAK. IT IS PREFERABLE TO RECEIVE THE PROGRAM IN MONO.
SET THE FM MODE SELECTOR AT THE “ST” POSITION FOR RECEIVING STEREO PROGRAMS. THE “ST” INDICATOR WILL APPEAR ON THE LCD TO SHOW THE FM STEREO PROGRAM IS RECEIVING.

HINTS FOR BEST RECEPTION:
– AM/LW: THE RECEIVER HAS A BUILT-IN MW/LW BAR ANTENNA. IF AM/LW RECEPTION IS WEAK, SLIGHT ROTATION OR REPOSITIONING OF THE UNIT WILL USUALLY IMPROVE THE AM/LW RECEPTION.
– FM: THE RECEIVER HAS A BUILT-IN FM WIRE ANTENNA HANGING AT THE REAR CABINET. THIS WIRE SHOULD BE TOTALLY UNRAVELED AND EXTENDED FOR THE BEST RECEPTION.
PHONO
NOTED:
– REMOVE THE STYLUS PROTECTOR.
– BE SURE THAT THE TONEARM IS BEING DETACHED FROM THE TONEARM REST BEFORE OPERATING, AND RE-SECURED AGAIN AFTERWARDS.

PRESS THE ” PHONO ” FUNCTION SWITCH.
SET THE SPEED SELECTOR TO THE PROPER POSITION DEPENDING ON THE RECORD TO BE PLAYED.
PLACE THE RECORD ON THE PLATTER (USE THE SPINDLE ADAPTOR IF REQUIRED).
LIFT THE TONE ARM FROM THE REST AND SLOWLY MOVE IT TO THE RECORD SIDE. THE PLATTER WILL BE ROTATED.
PLACE THE TONE ARM TO THE DESIRED POSITION OF THE RECORD.
ADJUST THE VOLUME TO THE DESIRED LEVEL.
AT THE END OF THE RECORD, THE PLATTER WILL AUTOMATICALLY STOP ROTATING. LIFT THE TONEARM FROM THE RECORD AND RETURN IT TO THE REST.
TO STOP MANUALLY, LIFT THE TONE ARM FROM THE RECORD AND RETURN IT TO THE REST.

REMARK:

AS SOME KIND OF RECORD THE AUTO-STOP AREA WAS OUT OF THE UNIT SETTING, SO IT WILL STOP BEFORE THE LAST RACK IS FINISHED. IN THIS CASE, SELECT THE AUTO-STOP SWITCH TO THE ” OFF ” POSITION, THEN IT WILL RUN TO THE END OF THE RECORD BUT WILL NOT STOP AUTOMATICALLY (TURN OFF THE UNIT BY POWER BUTTON OR SWITCH BACK THE AUTO-STOP SWITCH TO THE ” ON ” POSITION TO STOP THE PLATTER ROTATE). THEN PUT BACK THE TONEARM TO THE REST POSITION.

PLAYING COMPACT DISC

GETTING STARTED

PRESS THE “CD” BUTTON.
PRESS THE “OPEN/CLOSE” BUTTON TO OPEN THE CD DOOR.
PLACE A CD WITH THE PRINTED SIDE FACING UP INSIDE THE TRAY.
PRESS THE ” Cors.9) ” OR ” DISC-CH ” BUTTON TO TURN THE CD TRAY, AND LOAD OTHER DISCS.
PRESS THE “OPEN/CLOSE” BUTTON TO CLOSE THE CD DOOR.
CD-SEARCH IS PERFORMING, THE DISPLAY WILL SHOW THE TOTAL NUMBER OF DISCS, NUMBER OF TRACKS & PLAYING TIME OF DISCS.

NOTE: CD SEARCHING WILL BE PERFORMED EVERY TIME WHEN SWITCHING TO CD MODE OR CLOSING THE CD DOOR. ALL CD FUNCTIONS WILL BE RESPONDED TO ONLY AFTER THE CD SEARCHING IS COMPLETED.

PLAY / PAUSE MODE

PRESS THE “PLAY/PAUSE” BUTTON TO START PLAYBACK, THE FIRST TRACK OF THE FIRST DISC WILL BE PLAYED AND THE PLAY INDICATOR WILL APPEAR ON THE LCD DISPLAY.
OR PRESS EITHER THE ” DISC 1 “, ” DISC 2 “, OR ” DISC 3 ” BUTTON, THE UNIT WILL PLAY THE DISC INSIDE THE DESIRED TRAY DIRECTLY. IT WILL ONLY PLAY THAT DISC AND STOP PLAYBACK AT THE END OF THAT DISC.
TO PAUSE, PRESS THE “PLAY/PAUSE” BUTTON ONCE, AND THE DISPLAY WILL START FLASHING. PRESS AGAIN TO RELEASE & RESUME PLAYBACK.

If you wish to play all discs inside the unit, press the PLAY button after inserting all 3 discs, it will play all 3 discs in sequence.
Note: If you press the button ” Disc 1 ” or ” Disc 2 ” or ” Disc 3″ (located near the CD tray at the bottom of the unit or on the remote control, it will play only that particular disc. The words ONE DISC will be on the screen, which means only one disc will play.
The button can be pressed if you wish to change to a different disc. The words ALL DISC will remain on the screen. This means that all discs will be played.

STOP MODE

IF THE “STOP” BUTTON IS PRESSED DURING PLAY OR PAUSE MODE, THE SYSTEM WILL GO TO STOP MODE.

SKIP MODE (SKIP UP /SKIP DOWN

DURING PLAY OR PAUSE MODE, IF THE “ SKIP + ” BUTTON IS PRESSED IT WILL GO TO THE NEXT TRACK AND DISPLAY THE TRACK NO. AND THEN REMAIN IN THE PLAY OR PAUSE MODE.
DURING PLAY OR PAUSE MODE, IF THE “ SKIP – ” BUTTON IS PRESSED. IT WILL GO BACK TO THE BEGINNING OF THE TRACK, ORIGINAL TRACK NO. IS DISPLAYED AND REMAINS IN THE PLAY OR PAUSE MODE.
AFTER STEP 2, PRESS THE “ SKIP – ” BUTTON AGAIN WILL GO TO THE PREVIOUS TRACK AND REMAIN IN THE PLAY OR PAUSE MODE.

SEARCH MODE (SEARCH UP /SEARCH DOWN )

DURING PLAY MODE, IF THE “ SEARCH + ” BUTTON IS PRESSED & HOLD FOR A FEW SECONDS, IT WILL START SEARCHING FORWARD.
DURING PLAY MODE, IF THE “ SEARCH – ” BUTTON IS PRESSED & HOLD FOR A FEW SECONDS. IT WILL START SEARCHING BACKWARDS.

REPEAT PLAY
THIS FUNCTION ALLOWS TO REPETITION 1 SINGLE TRACK, 1 SINGLE DISC, OR ALL DISCS:-
PRESS THE “ REPEAT “ KEYS REPEATEDLY TO SWITCH THE FUNCTION:-

NOTE : SINGLE-TRACK REPEAT FUNCTION IS POSSIBLE IN NORMAL OR PROGRAMMED PLAYBACK, REPEAT ONE DISC OR ALL DISCS IS ONLY AVAILABLE IN NORMAL PLAYBACK.
• RANDOM PLAY
YOU CAN LISTEN TO ALL THE TACKS OF ALL AVAILABLE DISCS IN A RANDOM ORDER BY THIS FUNCTION

PRESS THE “RANDOM” BUTTON ONCE, AND THE UNIT WILL PLAY ALL DISCS RANDOMLY; PRESS IT AGAIN, UNIT WILL PLAY 1 DISC RANDOMLY.
PRESS THE “PLAY/PAUSE” BUTTON TO START RANDOM PLAYBACK.
ALL TRACKS OF ALL DISCS OR ALL TRACKS OF 1 DISC WILL BE STARTED PLAYBACK IN RANDOM ORDER.
PRESS THE “RANDOM” BUTTON AGAIN TO CANCEL THE RANDOM MODE.
If 3 discs are inserted and the total song is 30 tracks (for example), the unit will playback all 30 songs and then stop.

CD PROGRAMMING
UP TO 60 TACKS CAN BE PROGRAMMED TO BE PLAYED IN ANY REQUIRED ORDER FROM ONE CD OR ALL CDs IN THE CD CHANGER.

SET IN CD MODE.
PRESS THE MEM/CLK-ADJ. BUTTON
PRESS THE “ ” TO SELECT THE DESIRED DISC.
PRESS THE SKIP OR BUTTON TO SELECT THE DESIRED TRACK.
PRESS THE “ MEM/CLK/ADJ. “ BUTTON AGAIN TO STORE THE TRACK IN MEMORY.
REPEAT STEPS 2 TO 4 TO ENTER THE ADDITIONAL PROGRAM
PRESS THE PLAY/PAUSE BUTTON TO START PLAYBACK IN ORDER.
PRESS THE “STOP/BAND” BUTTON TO STOP PLAYBACK AND PRESS IT AGAIN TO CLEAR ALL PROGRAMMED TRACKS.

TAPE DECK
GENERAL OPERATION

STOP / EJECT KEY| PRESS TO STOP ALL DECK OPERATIONS. PRESS AGAIN TO OPEN THE CASSETTE DOOR.
---|---
FAST FORWARD KEY & FAST REWIND KEY| PRESS TO START RAPID TAPE WINDING IN EITHER FORWARD OR REVERS DIRECTION. PRESS STOP / FAST REWIND KEY EJECT KEYS WHEN THE CASSETTE SPOOLS STOP TURNING.
PLAY KEY| PRESS TO START PLAYING TAPE.
PAUSE KEY| PRESS TO STOP TAPE OPERATION TEMPORARILY. PRESS AGAIN TO RESUME PLAY.
RECORD KEY (DECK 1 ONLY)| PRESS TOGETHER WITH PLAY KEY TO START TAPE RECORDING.

PLAYBACK

PRESS THE “TAPE” BUTTON TO ACTIVE TAPE FUNCTION
PUT IN THE CASSETTE TAPE.
PRESS THE PLAY KEY TO ACTIVE PLAYBACK
ADJUST THE VOLUME CONTROL TO THE DESIRED LEVEL.
USE THE PAUSE KEY WHEN YOU WANT TO STOP PLAYBACK TEMPORARILY.
PRESS THE STOP / EJECT KEY WHEN FINISHED.

RECORDING
A. RECORDING FROM TAPE (DECK 2 TO DECK 1)
THIS UNIT ENABLES YOU TO DUPLICATE A PRE-RECORDED TAPE TO ANOTHER TAPE. IT IS PERFORMED ONLY ONE WAY FROM DECK 2 (PLAYBACK) TO DECK 1 (RECORDING).

DUBBING AT NORMAL SPEED

PRESS THE “ TAPE ” FUNCTION BUTTON.
INSET A PRERECORDED CASSETTE INTO DECK 2 AND A BLANK CASSETTE TAPE INTO DECK 1.
PRESS THE “ PAUSE ” KEY AND THEN PRESS THE “ RECORD ” AND “ PLAY ” KEY AT DECK 1.
PRESS THE “ PLAY ” KEY TO START PLAYBACK AT DECK 2 & THEN PRESS THE “ PAUSE ” KEY AT DECK 1 TO START DUBBING.
PRESS THE “ PAUSE ” KEY AT DECK 1 & “ STOP ” KEY ON DECK 2 WHEN FINISH.

DUBBING AT HIGH SPEED

THIS UNIT IS EQUIPPED WITH A HIGH-SPEED DUBBING SYSTEM WHICH CAN SAVE THE TIME FOR DUBBING BY 2/3 WHEN COMPARE TO NORMAL SPEED.

PRESS THE DUBBING BUTTON TO THE “ HI “ POSITION AND THEN FOLLOW THE SAME PROCEDURES AS STIPULATED IN “DUBBING AT NORMAL SPEED”.
WHEN DUBBING A PRE-RECORDED CASSETTE TAPE AT HIGH SPEED, A CHATTERING SOUND IS BEING HEARD. TO AVOID THIS, SET THE VOLUME CONTROL TO A MINIMUM LEVEL.
DO NO ACTIVE/DE-ACTIVE THE “HI-NOR. DUBBING” BUTTON DURING DUBBING, WILL VARY THE SPEED OF RECORDING MAY DAMAGE THE CASSETTE TAPE.

B. RECORDING FROM RADIO

PRESS THE “RADIO” BUTTON TO ACTIVE RADIO MODE
TUNE TO THE DESIRED STATION AND INSERT A BLANK CASSETTE TAPE IN DECK 1.
PRESS THE “RECORD” & “PLAY“KEYS TO START RECORDING.
PRESS THE “PAUSE” KEYS AND THEN THE “STOP/EJECT” KEY WHEN FINISHED.
DURING THE RECORDING OF AM, A BEATING WHISTLE AT SOME RECEPTION STATIONS MAY HAPPEN, BY SELECTING THE “BEAT CUT 1-2” SWITCH MAY HELP TO REDUCE THE BACKGROUND NOISE.

C. RECORDING FROM CD

PRESS THE “CD” FUNCTION BUTTON.
INSERT A BLACK CASSETTE TAPE IN DECK 1 WHICH SUITABLE FOR RECORDING.
PRESS THE “PAUSE” KEY FIRST AND THEN THE “RECORD” & “PLAY“ KEY AT THE CASSETTE. THE RECORDING FUNCTION IS NOW ON STAND-BY.
ACTIVATE THE CD PLAYER, AND THEN PRESS “PAUSE KEY” AT THE CASSETTE TO START RECORDING.
TO STOP RECORDING, PRESS THE “STOP” BUTTON ON CD PLAYER FIRST, THEN PRESS THE “PAUSE” KEY AND THEN THE “STOP/EJECT” KEY ON THE CASSETTE TAPE DECK.

D. RECORDING FROM TURNTABLE

PRESS THE “PHONO” BUTTON TO ACTIVE TURNTABLE MODE
INSERT A BLANK CASSETTE TAPE IN DECK 1.
PRESS THE “RECORD” & “PLAY“KEYS TO START RECORDING.
SELECT THE DESIRED RECORD AND START THE PLAYBACK
PRESS THE “PAUSE” KEYS AND THEN THE “STOP/EJECT” KEY WHEN FINISH.

MORE FEATURES

A. SLEEP SETTING

PRESS & HOLD THE “ SLEEP/TIMER ” BUTTON, TO ACTIVE & ADJUST THE SLEEP TIMER IN THE ORDER OF 90 > 80 >70….10 MINUTES AUTOMATICALLY.
THE SYSTEM WILL STOP AND GOTO STANDBY MODE AUTOMATICALLY AFTER THE SELECTED TIMING.
TO CANCEL THE SLEEP MODE, PRESS AND HOLD THE “ SLEEP/TIMER ” BUTTON UNTIL “ SLEEP ” INDICATOR DISAPPEARS.

B. TIMER SETTING (BY REMOTE HANDSET)

THIS FUNCTION ALLOWS THE SYSTEM TO TURN ON AUTOMATICALLY AND WAKE YOU UP BY SOFT CD MUSIC OR RADIO.

PRESS THE “ MODE ” BUTTON ON THE REMOTE HANDSET, AND THE LCD DISPLAY WILL SHOW THE INFORMATION AS THE FOLLOWING ORDER:-

1) CURRENT TIME

ON-TIME SETTING| : PRESS “ MEM/CLOCK ADJ. ” KEY & THEN “ SKIP +/- ” TO SET THE TIME. THEN PRESS THE “ MODE “ BUTTON TO STORE THE ALARM STARTING TIME.
---|---
OFF-TIME SETTING| : PRESS “ MEM/CLOCK ADJ. ” KEY & THEN “ SKIP +/- ” TO SET THE TIME. THEN PRESS THE “ MODE “ BUTTON TO STORE THE ALARM SWITCH-OFF TIME.
MODE| : PRESS “ MEM/CLOCK ADJ. ” KEY & THEN “ SKIP +/- ” TO SET THE MODE (CD OR TUNER). THEN PRESS THE “ MODE ” BUTTON TO COMPLETE THE SETTING.

PRESS THE “ MODE ” BUTTON REPEATEDLY TO REVIEW THE PRESET TIME IN ORDER.
THE PROGRAMMING WILL AUTOMATICALLY CANCEL IF NO BUTTON IS BEING PRESSED IN A PERIOD OF ABOUT 10 SECONDS.

ACTIVE/DE-ACTIVE TIMER FUNCTION

PRESS THE “ SLEEP/TIMER ” BUTTON ONCE & THE TIMER INDICATOR ****IS SHOWN ON LCD
TO CANCEL THE ALARM FUNCTION BY PRESS AGAIN “SLEEP/TIMER” BUTTON UNTIL THE TIMER INDICATOR “ ****” DISAPPEARS

C. PRESETS EQ FUNCTION
THIS UNIT PROVIDES 5 DIFFERENT SOUND MODES TO ENHANCE YOUR LISTENING EXPERIENCE. YOU CAN SELECT THE DESIRED EFFECT BY PRESSING THE “EQ” BUTTON REPEATEDLY AT THE FOLLOWING SEQUENCE:-

D. MUTE FUNCTION
PRESS TO TERMINATE THE SOUND OUTPUT FROM THE SYSTEM TEMPORARILY AND PRESS AGAIN TO CANCEL THIS MODE.
REMOTE CONTROL TRANSMITTER
CONTROL FUNCTIONS
BATTERY INSTALLATION: ( Battery not Supplied )
INSERT BATTERIES INTO THE REMOTE CONTROL BATTERY COMPARTMENT FOLLOWING THE POLARITY ( + – ) INDICATED. THE REMOTE CONTROL REQUIRES 2 X 1,5 “ AAA “ BATTERY FOR OPERATION ( WE RECOMMEND USING A GOOD BRAND ALKALINE BATTERIES )

BUTTON DESCRIPTION

OPEN/CLOSE	PRESS TO OPEN & CLOSE THE CD DOOR
POWER	PRESS TO SWITCH THE SYSTEM INTO STANDBY MODE
DISC 1,2,3	PRESS TO SELECT THE DISC FOR PLAYBACK DIRECTLY
DISC-CH	PRESS TO SELECT THE NEXT DESIRE DISC AND ROTATE

THE DISC TRAY
SLEEP| PRESS TO ACTIVE SLEEP FUNCTION
TIMER| PRESS TO SET THE ALARM MODE ON/OFF
PHONO| PRESS TO ACTIVE PHONO MODE
EQ| PRESS TO SELECT EQ MODE
MUTE| PRESS TO ACTIVE MUTE FUNCTION
CD| PRESS TO ACTIVE CD MODE
TUNER/BAND| PRESS TO ACTIVE TUNER MODE AND SELECT RADIO BAND
VOLUME -/+| CONTROL VOLUME UP DOWN
SKIP UP/DOWN| IN CD MODE: TO SELECT THE PREVIOUS / NEXT CD TRACK IN TUNER MODE: PRESS TO STEP UP/DOWN OF FREQUENCY
PLAY/PAUSE | IN CD MODE, PRESS ONCE TO START PLAYBACK. PRESS ONCE AGAIN TO STOP THE DISC PLAY TEMPORARILY
STOP | IN CD MODE, PRESS TO TERMINATE CD PLAYBACK
IN TUNER MODE, PRESS TO SELECT THE RADIO BAND
REPEAT/M-UP| IN CD MODE: PRESS TO ACTIVE THE REPEAT FUNCTION IN TUNER/’ MODE: PRESS TO CALL OUT THE PRESET MEMORY IN ORDER
RANDOM/M-DOWN| IN CD MODE : PRESS TO ACTIVE THE RANDOM PLAYBACK FOR CD MODE
IN TUNER MODE : PRESS TO CALL OUT THE PRESET MEMORY IN BACK
MEMORY/CLK-ADJ| IN STANDBY MODE, FOR CLOCK SETTING
IN TUNER MODE, FOR PRE-SETTING OF RADIO STATION INTO MEMORY
MODE| TO REVIEW AND SET THE ALARAM ON/OFF TIME