LENOXX SL7 Solar Gutter Light Instruction Manual
- June 4, 2024
- lenoxx
Table of Contents
LENOXX SL7 Solar Gutter Light
READ THE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY AND INSTALLATION
FIRST TIME USE: Remove the protective film from the solar panel before the first use.
CHARGING AND OPERATION
- Turn the switch to “ON” position. The switch is located at the bottom base of the solar panel.
- Charge the solar product by placing it under direct sunshine for at least 8 hours.
- The light will work automatically once the switch is in “ON” position. It will automatically charge under direct sunshine in the day time and illuminate at night.
NOTE: In order to verify that the knob is correctly switched to “ON”
position, cover the solar panel with your hand and the light
will turn “ON” automatically.
IMPORTANT:
- Install the solar product in an area where it can get direct sunlight.
- Leave the switch to “ON” position..
- Select an outdoor location away from other light source at night such as street lights. It may cause the product not to turn on automatically at night.
- Duration of light depends on solar product’s level of sunshine exposure, geographical locations, weather conditions and the hours of daylight.
MAINTENANCE, TROUBLE SHOOTING AND BATTERY REPLACEMENT
- Keep the solar panel clean.
- If solar product does not light up after it has been used for around 8 – 12 months, replace the rechargeable batteries as they may be weak or worn out. (Battery 1pcs 3.7V 1800Mah 18650 Lithium Ion Battery or same equivalent type as recommended must be used).
- Exercise caution when replacing batteries. Open the battery to replace the old battery with a new one. Battery must be recycled or disposed of properly, don’t dispose batteries in fire or trash. Contact your town or city’s recycling center to find out how to properly dispose batteries.
ASSEMBLY INSTRUCTIONS
- Insert the mounting bracket into the solar light case and secure it with small screw (#10) using a small Phillips head screwdriver. (Screwdriver not included).
- Install the mounting bracket on the gutter and secure with thumb screw (#9).
NOTE: Idea for handing on gutter-eaves or fastening to roof wooden fence.
Components
- rechargeable battery (1pcs) #2 battery compartment
- directional sleeve
- On-Off switch
- LED lights (3pcs)
- screw hole for flush mounting #7 mounting bracket (1pc)
- mount ing slot
- thumb screw (1pc)
- small screw (1pc)
Lenoxx Electronics Aust Pty Ltd
www.lenoxx.com.au
Customer Service : 1300 666 848
Follow Us
FB: Facebook.com/LenoxxElectronics
Twitter: twitter.com/LenoxxAustralla
www.lenoxx.com.au
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>