eboy EBE-SHW11-B LED Lamp User Manual
- June 5, 2024
- eboy
Table of Contents
EBE-SHW11-B LED Lamp
User Manual
WHAT YOU GET
The following items are included in the box: 
Manufacture: ZHEJIANG EBOY TECHNOLOGY Co., Ltd.
DESCRIPTION
| ITEM: | EBE-SHW11-B |
|---|---|
| POWER: | 17.15dBm(802.11b),17.49dBm(802.11g).17.94dBm(802.11n20), |
18.07dBm(802.11n40)
LUMINOUS FLUX:| 700 lumens
COLOR TEMP:| 2700k
LIFE SPAN:| 25000-hour
BEAM ANGLE:| 115º
DIMMABLE:| Bright
DIMENSION:| 132*96mm
| |
---|---|---
No Hub| Remote Access| Select Color
| |
Dimmable| Set Schedule| Energy Saving
INSTALLATION
STEP 1
Screw-in AEOT bulb into the socket.
STEP 2
Power on and off 3 times.
STEP 3
Confirm that bulb is rapidly flashing.
STEP 4
Proceed to connect via AEoT.
SET-UP
MAKE SURE WI-FI NETWORK IS AVAILABLE
SUPPORT
FCC Statement:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>