Zhejiang Eboy Technology EBECZW01-B Smart Plug User Manual

Zhejiang Eboy Technology
EBECZW01-B Smart Plug
User Manual

Electrical Rating: 120V AC,50Hz,13A Load,2990W General use
Wireless Type: Wi-Fi 2.4GHz
App Support: iOS / Android

Warm Tips:

• Only supports 2.4 GHz Wi-Fi network
• Simplified steps to install App on your smartphone or tablet on Apple/Google Play Store
• Works with Amazon Alexa, Google Home & IFTTT
• For indoor use only

Now to connect Smart Plug to Wi-Fi network

1. Download Smart Life from or Download or scan the OR code and install the Smart Life App for either iOS or Android. Once downloaded, the app will ask you to register your device. Enter your phone number or email. If you selected a phone number, you will receive a text with a registration code. If you choose to email, you will then create a password.

http://e.tuya.com/smartlife

Attention: There’s no Registration Code needed if the email method is chosen.
Please note: there’re two modes configurations (Quick Mode / AP Mode) available for you to choose from before adding the device to the app.
Quick Mode is recommended.

Quick Mode Configuration (Common)

1. Make sure quick mode configuration is initiated: the indicator light blinks blue rapidly (twice per second). If it blinks blue slowly (once every 3 seconds), press and holds the power button on the Smart Plug for 6 seconds until the indicator light blinks rapidly.

2. Tap the icon “+” on the top right comer of “Smart Life”, choose your device type and enter into ” Add Device”.
   

3. Follow the in-app instructions to connect the Smart Plug to your Wi-Fi network.

4. Once connected, the App will prompt the connection, and click “Dune”.

5. Now you can control the Smart Plug through Smart Life APP.

6. Once the configuration is completed successfully, the indicator light will turn to solid blue and the device will be added to the “Device List”.

AP Mode Configuration

1. Make sure AP mode configuration is initiated: the indicator light blinks blue slowly (once every 3 seconds). If it blinks blue rapidly (twice per second), press and holds the power button on the Smart Plug for 6 seconds until the indicator light blinks slowly.

2. Tap the icon “+” at the top right corner of *Smart life” tab and then select the device type (Electrical outlet], enter into the “Add Device” click AP Mode” at the top right corner of “Add Device” tab to add a device.

3. Follow the in-app instructions to connect the Smart Plug to your Wi-Fi network.

4. Once connected, the App will prompt the connection, and click “Done”.

5. Now you can control the Smart Plug through Smart Life APP.

6. Once the configuration is completed successfully, the indicator light will turn to solid blue and the device will be added to the “Device List”.
   Please note: you can add the Smart Plug to Echo/ Google Home following the instructions below. Or the one on the app (Open Smart Life App, go to “Profile” -> “Integration” tap “Amazon echo “or “Google Home” and install).

**How to connect Smart Plug to Amazon Alexa

**

1. Launch Smart Life App, sign in to your account, and make sure Smart Plug is on the device list.

2. Modify device names so that Alexa can easily recognize them, such as Living Room Light, Bedroom Light, etc.

3. Minimize Smart Life App, then Launch the Alexa App and sign in to your Alexa account and make sure you have at least one Alexa voice-controlled device installed like Echo, Echo dot, etc.

4. In the upper left corner of the Home page, click the button to show the App menu. Then clicks on the menu
   

5. Type in Smart Life in the search and click the search button next to it.

6. Enable Smart Life to the skill, then sign in to your Smart Life account to complete the account linking.
   

7. After linking the account successfully, you can ask Alexa to discover devices. Alexa will show all the discovered devices after 20 seconds.
   

8. Back to Menu by clicking the button, and then click the button.

9. In the Smart Home page, you can group your devices into different categories. Your Smart Life APP has been skilled with Alexa. Now you can control your Smart Plug through Alexa.
   

How to connect Smart Device to Google Home

1. Launch the Google Home App and make sure the Google Home speaker is installed. If not, please follow Google Home speaker installation instructions to complete the installation.

2. Once Google Home is installed, in the upper left corner of the App Home page, click the button to show the App menu. Then click “Home Control” in the menu.
   

3. On the “Add device” page, scroll down to find “Smart Life” and then click it. Sign in Smart Life APP with your account and password. Choose Smart Life APP in the dropdown menu to complete the account linking.
   

4. After successful account linking, in Google Home App you can see all the smart devices from your Smart Life App account. You can assign rooms for each device.

Troubleshooting and FAQ

1. What devices can I control with the Smart Plug?
   You can control lights, fans, portable heaters, and any small appliances in accordance with the Smart Plug’s specifications.

2. What should I do when I cannot turn Smart Plug on or off?
   Make sure your mobile devices and the Smart Plug are connected to the same Wi- Fi network. Make sure the devices connected to the Smart Plug are turned on.

3. What should I do when device configuration process has failed? You could:
   • Check whether the Smart Plug is powered on or not.
   • Check whether your mobile device is connected to a 2.4 GHz WI-Fi network.
   • Check your network connectivity. Make sure the router is working properly: If the router is a dual-band router, please select 2.4G network and then add Smart Plug. Enable the router’s broadcasting function. Configure the encryption method as WPA2-PSK and authorization type as AES, or set both as auto. The wireless mode cannot be in only.
   • Check for Wi-Fi interference or relocate the Smart Plug to another location within the signal range.
   • Check whether the router’s connected devices reach the amount limit. Please try to turn off some device’s Wi-Fi function and configure Smart Plug again.
   • Check if the router’s wireless MAC filtering functions in enabled. Remove the device from the filter list and make sure the router is not prohibiting Smart Plug from connecting.
   • Make sure the password of your Wi-Fi network entered in App is correct when adding Smart Plug.
   • Make sure the Smart Plug is ready for App-Configuration: the indicator light is quick blinking blue (twice per second) for quick mode configuration, slow blinking blue [once every 3 seconds) for AP mode configuration.
   Repeat the App-configuration process. Factory reset the Smart Plug and tries to add it again.

4. Can I control the device through 2G/3G/4G cellular networks?
   The Smart Plug and the mobile device are required to be under the same Wi-Fi network when adding the Smart Plug for the first time. After successful device configuration, you can remotely control the device through 2G/3G/4G cellular networks.

5. How can I share my device with my family?
   Run the App Smart Life, go to “Profile” -> “Device Sharing” -> “Sent”, tap “Add Sharing”, now you can share the device with added family members.

6. How to reset this device?
   Factory reset: After Smart Plug is plugged into a power socket, press and hold [for 6 seconds) the power button for factory reset until the indicator light blinks blue rapidly. Indicator lighting pattern:
   • Quick blinking blue [twice per second): Quick mode configuration is initiated.
   • Slow blinking blue [once every 3 seconds): AP mode configuration is initiated.
   • Solid blue: The Smart Plug is connected to the Wi-Fi network.
   • Off: The Smart Plug is switched off and no Wi-Fi network.

Warranty

The product carries a one-year warranty from the purchase date. Please feel free to let us know what we can do to assist you when you have any product problems.

FCC Statement:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and. if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>