Nedis VMAT3464AT HDMI Splitter User Manual

: June 5, 2024
: nedis

VMAT3464AT HDMI Splitter

Nedis VMAT3464AT HDMI Splitter

User Manual

Preface

Thank you for purchasing the Nedis VMAT3464AT.

This document is the user manual and contains all the information for correct, efficient and safe use of the product.

This user manual is addressed to the end user. Read this information carefully before installing or using the product.

Always store this information with the product for use in the future.

Product description

Intended use

The Nedis VMAT3464AT is a true 1080p 4×4 HDMI matrix switch.

This product is intended to connect up to 4 HDMI inputs with up to 4 HDMI outputs and switch between them.

Any modification of the product may have consequences for safety, warranty and proper functioning.

Specifications

Product

|

HDMI Splitter

---|---

Article number

|

VMAT3464AT

Dimensions (l x w x h)

|

441 x 202 x 45 mm

Supported HDMI resolution

|

4K @ 30 Hz

1080p / 720p / 576p / 480p

Max bandwidth per channel

|

225 MHz

Max baud rate per display

|

2.25 Gbps

Input / Output DDC signal

|

5 V p-p (TTL)

Operating temperature

|

0 – 45 °C

Humidity

|

10 – 85% RH (no condensation)

Power supply

|

5 VDC / 4 A

Warranty

|

1 year

Main parts (image A)

A

1. HDMI Splitter

2. Power adapter

3. Infrared extender

4. Remote control

Front panel (image B)

B

1. Remote control sensor

2. HDMI input indicator LEDs for HDMI output A

3. HDMI input indicator LEDs for HDMI output B

4. HDMI input indicator LEDs for HDMI output C

5. HDMI input indicator LEDs for HDMI output D

6. Power switch

7. Select button, to switch HDMI input (1-4) to HDMI output A

8. Select button, to switch HDMI input (1-4) to HDMI output B

9. Select button, to switch HDMI input (1-4) to HDMI output C

10. Select button, to switch HDMI input (1-4) to HDMI output D

Rear panel (image C)

C

1. Power supply port

2. HDMI outputs (A-D)

3. HDMI inputs (1-4)

4. Infrared extender port

5. RS-232 communication port

Remote control (image D)

D

1. Power button

2. Select HDMI input buttons for HDMI output A

3. Select HDMI input buttons for HDMI output B

4. Select HDMI input buttons for HDMI output C

5. Select HDMI input buttons for HDMI output D

6. Auto button

7. Off button A

8. Off button B

9. Off button C

10. Off button D

Safety instructions

WARNING

Do not use a damaged product.
Do not expose the product to direct sunlight, naked flames or heat.
Do not expose the product to water or moisture.
Only use the product as described in this manual.
Do not open the product.
Place the product on a stable and flat surface.
Do not drop the product and avoid bumping.
Keep the product out of reach from children.

Installation

Check the contents of the package
Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.

Connection diagram (image E)

E

Connect HDMI input devices E 1 to the HDMI inputs C 2 using a HDMI cable. A HDMI input device can be for example a DVD player, a set top box or a game console.
Connect the HDMI output devices E 2 to the HDMI outputs C 1 using a HDMI cable.
Connect a RS-232 Equipped PC or Notebook E 3 to the RS-232 port C 5.
To make this connection use a RS-232 to USB cable and a RS-232 female to USB A male connector. This connection enables to send ASCII commands to the HDMI splitter A 1.
Connect the power supply port C 3 to a power outlet using the supplied DC 5 V, 2 A power adapter A 3.

Use

Using the HDMI Splitter
Press the HDMI input buttons D 2345 to select the input for each HDMI output (A-D).

Using the RS-232

For correct communication set the RS-232 parameters to the following setting:

Baud rate: 4800
Data bits: 8
Parity: none
Stop bits: 1

Maintenance

Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.

Warranty

Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.

Disclaimer

Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.

Disposal

|

This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.

---|---

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product VMAT3464AT from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.

The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via webshop.nedis.com/VMAT3464AT#support

Web: www.nedis.com

For additional information regarding the compliance, contact the customer service:

E-mail: service@nedis.com

Nedis B.V., de Tweeling 28

Phone: +31 (0)73-5991055 (during office hours)

5215 MC ’s-Hertogenbosch, the Netherlands