nVent ISSPK Strut Trapeze Attachment Kit Owner’s Manual
- June 16, 2024
- nVent
Table of Contents
nVent ISSPK Strut Trapeze Attachment Kit
Specifications
- Catalog Number: ISSPK
- Material: Steel
- Finish: Electrogalvanized
- Rod Size (RS): 3/8
- Ultimate Static Load (F): 500 lb
Features
The STRUT TRAPEZE ATTACHMENT KIT includes 2 strut trapeze attachment plates and 4 SN series nuts. It is designed to create fast install trapeze brackets.
Additional Product Details
The Ultimate Static Load is based on one strut trapeze attachment plate supported by two SN Series Nuts. When evaluating the complete trapeze structure (Strut Trapeze Attachment Kit and strut member), deformation and material yield of the strut must be taken into consideration. The lesser of the loads should be used as the Ultimate Static Load.
Diagrams
Warning
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication, or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death, and/or void your warranty.
Contact Information
Europe Netherlands: +31 800-0200135
France: +33 800 901 793
Germany: 800 1890272
Other Countries: +31 13 5835404
APAC Shanghai: + 86 21 2412 1618/19
Sydney: +61 2 9751 8500
Disclaimer
nVent reserves the right to change specifications without notice.
Product Usage Instructions
Step 1: Preparing for Installation
- Gather all the required tools and equipment.
- Ensure a safe working environment.
- Read and understand all the instructions and warnings provided in the product manual.
Step 2: Installing Strut Trapeze Attachment Kit
- Select a suitable location for the strut trapeze attachment.
- Attach the strut trapeze attachment plates to the desired surface using appropriate fasteners.
- Tighten the fasteners securely to ensure a stable attachment.
Step 3: Attaching the Strut Member
- Select the appropriate strut member for your application.
- Insert the SN Series Nuts into the holes.
- Tighten the nuts using a suitable tool until secure.
Step 4: Load Evaluation
When evaluating the load capacity of the trapeze structure, consider the deformation and material yield of the strut. Use the lesser of the loads as the Ultimate Static Load to ensure safe operation.
Step 5: Testing and Maintenance
After installation, perform a load test to ensure the stability and strength of the trapeze structure. Regularly inspect the attachment points and hardware for any signs of damage or wear. Replace any damaged components immediately.
Step 6: Disassembly (if required)
- Remove the load from the trapeze structure.
- Loosen and remove the SN Series Nuts.
- Detach the strut member from the strut trapeze attachment plates.
Step 7: Proper Storage
Store the Strut Trapeze Attachment Kit in a dry and secure location, away from any corrosive materials or harsh environments. Protect the kit from physical damage.
Frequently Asked Questions (FAQ)
Q: What is the Ultimate Static Load?
A : The Ultimate Static Load refers to the maximum amount of weight that the Strut Trapeze Attachment Kit can support without deformation or failure.
Q: Where can I find the product instruction sheets?
A: The product instruction sheets are available at
www.nvent.com or you can contact your nVent customer
service representative for assistance.
Q: Can I use this kit for outdoor applications?
A : The Strut Trapeze Attachment Kit is designed for indoor use. It is
not recommended for outdoor applications due to potential exposure to harsh
weather conditions.
Q: What tools do I need for installation?
A : The specific tools required for installation may vary depending on
the application. Generally, you will need wrenches or sockets to tighten the
fasteners and a suitable tool to tighten the SN Series Nuts.
© 2023 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent