SERCOMM CAP1800-AX Wi-Fi Extender User Guide

SERCOMM CAP1800-AX Wi-Fi Extender User Guide

Included in the box

The following items are included in the box:

1. CAP1800-AX

2. Quick Start Guide

3. Power adapter
   

4. Ethernet cable

If any of these items are damaged or missing, please contact your service provider immediately

Introduction

This chapter provides details of the CAP1800-AX’s features, components, and capabilities

Overview

The CAP1800-AX is designed to enhance the connectivity between your WiFi router and wireless client device while increasing the coverage of your existing WiFi network.
With its simple setup, this high-speed 802.11ax extender works seamlessly with most routers.

Features

• Easy Setup: WPS button setup or web browser configuration

Wireless Features

• Supports 11ax WiFi: 802.11ax is backwards compatible with 802.11a/b/g/n/ac
• WPS Support: WPS (WiFi Protected Setup) simplifies the process of connecting any device to the wireless network by using the push button on the device

Basic set up

• Step 1: Make sure the WiFi router is on and working properly.
• Step 2: Plug the CAP1800-AX near the WiFi router during setup.
• Step 3: Wait for the CAP1800-AX to boot up
• Step 4: Connect an Ethernet cable to the CAP1800-AX and your PC.
• Step 5: Launch the browser to do set up .
• Step   6: You will be prompted for a username and password

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE:

Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Country Code selection feature to be disabled for products marketed to the US/CANADA

Operation of this device is restricted to indoor use only

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>