EDIFIER W240TN True Wireless Noise Cancellation In Ear Headphones User Manual

EDIFIER W240TN True Wireless Noise Cancellation In-Ear Headphones

Power ON/OFF

1. Power ON when the case is opened.
2. Power OFF when placed in the case and the case is closed.

Note:
If there is no Bluetooth connection for 10 minutes after power on, the earbuds will turn off automatically.

Pairing

1. Earbuds placed in the case and keep the case open.
2. Press and hold the button on the case for about 3s. LEDs will be lit one by one from left to right in a circulating pattern.
3. Select “EDIFIER W240TN” in your device setting to connect. LEDs will blink twice and then turn off when successfully.

1st Pairing

1. Earbuds are placed in the case and keep the case open. LEDs will be lit one by one from left to right in a circulating pattern.
2. Select “EDIFIER W240TN” in your device setting to connect. LEDs will blink twice and then turn off when successfully.
   Note: For subsequent use, the earbuds will automatically connect to the device used last time.

Reset

1. Earbuds placed in the case and keep the case open.

2. Press the button on the case 3 times to re-enter left& right connection and clear pairing records.
   LEDs will be lit one by one from sides to center in a circulating pattern and then will blink twice when successfully.

3.  Select “EDIFIER W240TN” in your device setting to connect. LEDs will be lit one by one from left to right in a circulating pattern, then will blink twice and turn off when successfully.

Charging

Charging case

1. Please connect the case to power source with the included Type-C charging cable for charging.
2. LEDs are steady lit when charging and off when fully charged.
   Note: Please do not charge the earbuds when there is sweat or other liquids inside the charging port, which may damage the earbuds.
   Input: 5V-200mA(Earbuds)
   5V1A(Charging case)

**Controls

**

Note:

1. Images are for illustrative purposes only and may differ from the actual product.
2. Download Edifier Connect App for more customizable control settings.

FCC Regulatory Compliance

Warning: changes or modiífications not expressly approved by the party responsible for complíance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Compliance

• This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
• This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.

References

• Headphones, Speakers | A Passion for Sound -【Edifier USA】

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>