QFX PBX-126 TWS Bluetooth Rechargeable Portable 10-Watt Speaker-User Instructions
- June 5, 2024
- QFX
Table of Contents
QFX PBX-126 TWS Bluetooth Rechargeable Portable 10-Watt Speaker
Specifications
- OUTPUT POWER: 10W
- DRIVER UNIT SIZE: 4 inch
- IMPEDANCE: 3 Ohm
- S/N RATIO: 80dB
- SEPARATION: 45dB
- DISTORTION: 1.0%
- FREQUENCY RESPONSE: 100Hz-20KHz
- BLUETOOTH VERSION: V4.2+EDR
- BLUETOOTH RANGE: 10 meters
- BLUETOOTH PAIRING NAME PBX-126
- BLUETOOTH PROFILES SUPPORTED: A2DP
- USB & TF MAX. MEMORY SUPPORTED:32 GB
- FM RADIO: 87.5-108.0MHz
- BATTERY CAPACITY: Built-in 2400mAh Battery type: Lithium-Ion
- PLAYBACK TIME: 80MINS at maximum volume
- CHARGING INDICATOR: Yes
- CHARGE VOLTAGE: DC 5V
Introduction
With the PBX-126, be ready to rock the house! Your listening experience will be improved with the PBX-126’s 4″ woofer and 10 watts of output power. The PBX-126 is a must-have speaker whether you are rocking out by yourself or hosting an event.
from any of your devices, you may now stream music. The PBX-126 pairs easily and quickly. You may link two or more speaker systems using Bluetooth’s special function so that they can all play your music at the same time. To get the best surround sound, get many of these wireless speakers. Not a Bluetooth? No issue! Connect your devices with the auxiliary cable that is supplied.
Features
- Bluetooth
- True Wireless Stereo
- FM Radio
- USB/TF Card Inputs
- Aux Input
- Microphone Input
- Karaoke Function
- Rechargeable Lithium battery
Accessory
- USB Charging Cable
- Aux Cable 3.5mm
- User Manual
Connect to Bluetooth device Bluetooth Pairing
Begin by turning ON the unit. The ON/OFF switch is located on the back panel. Use the mode button “M” to enable Bluetooth. On your mobile device search for “QFX BT-136” under the Bluetooth settings menu and connect. Your mobile device should now be paired with the “BT-136” and ready for music playback.
True Wireless Stereo
If you have 2 “QFX BT-136” units with the TWS function, turn on both units,
and press and hold the MODE button on either unit for a few seconds. The units
will connect automatically.
Note: True Wireless Stereo (TWS) function only work in Bluetooth mode.
- ON/OFF/: Turn ON/OFF the unit.
- Microphone Input: 6.35mm jack.
- AUX: 3.5mm jack.
- USB Input: Insert USB device.
- TF Input: Insert TF Card
- M: Toggle through BT, AUX, USB, TF, FM Radio. Also, the TWS button.
- Play and Pause current track. In FM mode, press and hold for auto scan.
- Press and hold to decrease the volume. Press for previous track or FM radio station.
- Press and hold to increase the volume. Press for next track or FM radio station.
- Press to increase the bass.
- Press to change the LED Light mode
- DC-SV: USB – DC-SV, lA min
Bluetooth
Begin by turning ON the unit. The ON/OFF switch is located on the back panel. Use the mode button “M” to enable Bluetooth. On your mobile device search for “QFX BT-136” under the Bluetooth settings menu and connect. Your mobile device should now be paired with the “BT-136” and ready for music playback.
Press to Play/Pause, press return to the previous track and go to the next track.
AUX-IN
Press the MODE Button to enable Aux mode. plug the audio 3.5mm Aux cable to
the jack, Press and hold the and buttons to decrease and increase the volume.
USB/TF Card
Insert the USB or TF card into the USB/TF port to playback .mp3 music files
from the device. Press to Play/Pause, press return to the previous track and
go to the next track.
FM RADIO
Press the MODE button to enable the FM Radio mode. Press the Button to
search FM channels automatically. This operation will scan all FM stations and
pre-record them to the memory. The scan procedure will take several minutes to
complete and should not be interrupted.
Once complete, you can short press or to move forward or backward. Press and hold the and buttons to decrease and increase the volume
Charging
Plug the Micro USB cable into charging port and connect to a power source
(SV, lA min). The charging LED light indicator should light up red when the
unit is charging.
FAQ’s
-
How long does it take a Qfx speaker to charge?
5-6 hours Even if the battery power is low, it will turn on when attached to a power source. The power adapter will automatically start charging once it is connected to a power source (5–6 hours to completely charge the lithium battery). -
The Qfx is what?
A single Quicken account can import transactions from your bank using the QFX download format. It is known as Web Connect format in Quicken menus, and it will appear as OFX in Windows Explorer (since QFX is a variation of OFX). -
If the Qfx speaker is charging, how can you tell?
Even if the battery power is low, it will turn on when attached to a power source. The power adapter will automatically start charging once it is connected to a power source (5–6 hours to completely charge the lithium battery). The battery indication light will turn red when the battery power is low. -
How can a Qfx Bluetooth speaker be reset?
When you hear the gadget turn off, hold down the “volume down” and “power” keys simultaneously for around 6 seconds. Use the speaker as you would a fresh speaker after turning it on. -
What is the Qfx speaker radio used for?
By tapping the MODE button, choose the BT (Bluetooth) option. 2. On the portable device, activate the Bluetooth capability. 3. Locate your “QFX PBX-800” speaker and link it with it. 4. To start playback, press the PLAY / PAUSE button. JACK IN MIC Connect the wired headset microphone (not included). -
The TWS button is what?
You may experience full stereo sound quality without the necessity of cords or wires thanks to a special Bluetooth function known as True Wireless Stereo (TWS). This is how TWS operates: You connect your favorite Bluetooth music source to a main Bluetooth speaker. -
What is the QFX speaker’s wattage?
Boomboxes & Radios’ QFX 1,500-Watt Rechargeable Bluetooth Party Speaker -
Describe a QFX switch.
high-speed, high-density switches for data centers. The QFX Series Switches offer the greatest routing stack, open programmability of the Junos OS, industry-leading throughput and scalability, and the most comprehensive set of EVPN-VXLAN and IP fabric features. -
When charging, can I use my Bluetooth speaker?
You may also use Bluetooth speakers while they are charging. However, it is always advised against using a phone, speaker, or any other gadget while it is charging because the battery is simultaneously charging and draining. It might heat up, and there’s a danger of an explosion.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>