FISKARS 1025932 Waterwheel XL All-Inclusive Watering Kit Instruction Manual
- June 5, 2024
- FISKARS
Table of Contents
FISKARS 1025932 Waterwheel XL All-Inclusive Watering Kit
Parts
Use
- Unpack and place the product into any desired location in your garden.
- Open the store locker (E) and take the tap connector (B) out. Choose the right thread size. Tap connector has 3 thread sizes. Install tap connector into the tap outside.
- Install the inlet hose (G1/G2) into the tap.
- Take the nozzle (A) from the store locker and install into the hose (F).
- Pull the hose into the desired length. 6. Start watering by turning the nozzle (A) head.
AUTOMATIC REEL-IN: quickly pull the hose and the automatic reel-in will
start. Follow the hose to the wheel while the reel is pulling the hose in
automatically.
NOTE: The reel “snaps” while you reel-out or reel-in.
Important information
ATTENTION Please read the manual before using.
WARNING! Risk of injury due to prestressed spring. Do not open the hose gasket.
WARNING Always close the water source (water tap) after use of the garden watering products.
WARNING Do not direct the water jet towards electrical equipment!
WARNING Do not direct the water jet towards persons or animals!
WARNING No drinking water.
Store in a
frost-free environment.
The manufacturer shall repair or replace, through the dealer, any parts of the product found to be faulty due to manufacturing defects, for a period of 24 months as of the date of purchase. The warranty does not cover defects due to tampering, improper use or wear. The warranty is valid only if the customer returns the product to the dealer complete in all its parts together with the receipt or other document proving the date of purchase.
Fiskars Oy, Finland hereby certifies that when leaving Fiskars factory the
Waterwheel XL and Waterwheel XL, with wheels are in accordance with
harmonized EU guidelines, EU standards of safety and product specific
standards. This certificate becomes void if the units are modified without
Fiskars approval.
CE declaration of conformity in accordance with European Machinery Directive
2006/42/
EC annex I and other applicable directives.
For more information:www.fiskars.eu/watering