MEMPHIS SBT4 Bluetooth Controller with AUX Input Marini Garde Construction Instruction Manual
- June 5, 2024
- MEMPHIS
Table of Contents
SBT4
Bluetooth Controller With AUX Input
Erl. Marine Grade Construction
Ready to turn it up? Read this first!
Memphis Audio built a SO-year legacy in the audio industry by engineering the highest quality products to produce the best possible listening experience for our fans and loyal supporters. To fully appreciate the products we recommend taking the time to read and follow the instructions in this manual. As always. we recommend all the installations and services be performed by an authorized Memphis Audio dealer.
For optimal performance. Memphis recommends using only Memphis Connection accessories. Outfitting your system with properly sized Memphis Connection wire and accessories will dramatically boost your listening experience and increase the durability of your Memphis Audio products.
Memphis Audio’s SB74 Bluetooth streaming accessories allow you to wirelessly connect to any Bluetooth device providing a complete Bluetooth solution wherever you need it. To keep this piece as bulletproof as possible. we sealed the unit making It waterproof in the event of submersion and resistance to the elements.
Combine with our Memphis Xtreme Speakers and ultra-compact amplifiers for the perfect rugged go-anywhere audio solution!
Features
- Rotary knob for easy and intuitive volume control
- ROB LED knob indicates source selection
- Inputs Include Bluetooth and AUX. USB flash drive play
- USB charging compatibility
- Water and element resistant
- 2.6V output
- Flush. surface mount or bar mount
Pairing Instructions
Before starting, confirm your Bluetooth device is capable of streaming A2DP Bluetooth signals and that the Bluetooth is ENABLED on the device. Typically that function is available by entering the settings menu, then finding the ‘Bluetooth” controls on your device.
Bluetooth functions are typically depicted by a Bluetooth symbol. Look for the
Bluetooth symbol on your device when attempting to enable Bluetooth
functionality.
Operation:
Long press and hold the power button for 2 seconds. The unit will turn on
and the buttons will illuminate blue. The BT LED will flash rapidly when the
unit is powered on. When the SBT4 is successfully paired. the BT indicator
will then be lit blue continuously and will no longer be flashing.
Make sure your phone is in ‘Pairing’ or ‘Discoverable’ mode. Within a few
seconds, you should see ‘SBT4’ appear on your device’s Bluetooth menu.
Selecting ‘SBT4’ will authorize your device to connect with the SBT4.
Once the SBT4 is connected. be certain the volume on your phone is set at a
reasonably high level (at least 3/4 of max volume). Adjusting the volume of
the system can be done on the SBT4 once your device is paired.
Press and hold the power button for 2 seconds to turn off the unit.
Control Functions: The controls will allow you to perform the following
functions: track up. track down, volume up. volume down, play/pause in
Bluetooth mode.
Changing Source: After the power is on. short pressing the power
button will change between the sources: Bluetooth > Aux > USB. The related
indicator will illuminate showing which selection is active.
Identifying source modes:
BLUE LED indicates Bluetooth source.
GREEN LED indicates Aux source.
PURPLE LED indicates USB source.
Button Functions
Bluetooth, Aux, and USB Charging Inputs
Warranty
Should your SBT4 require service, please consult with the dealer from which it
was purchased, or contact Memphis Audio customer service:
at 800-489-2300. or send an email to
[email protected]. Do
not attempt to return your accessory directly to us without first calling a
Return Authorization number.
Units received without an accompanying Return Authorization number will be
returned unopened. Additionally. you must include a copy of your purchase
receipt from an authorized dealer for consideration of in-warranty service:
otherwise, repair charges will apply. Units received without a receipt will be
held for 30 days allowing us time to contact you and obtain a copy of the
receipt.
Legal Disclaimer
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device. pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception. which can be determined by turning the equipment off and
on. the user is encouraged to try to correct the interference by one or more
of the following measures:
This equipment should be installed and operated with a minimum distance of
20cm between the radiator&your body.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment must be installed and operated in
accordance with provided instructions and the antenna(s) used for this
transmitter must be installed to provide a separation distance of at least
20cm from all persons.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
800.489.2300
www.memphisaudio.com
122 Gayoso Ave.
Memphis, TN, USA
@MEMPHISAUDIO
@MEMPHISCARAUDIOUSA
Documents / Resources
|
MEMPHIS SBT4 Bluetooth Controller with AUX Input Marini Garde
Construction
[pdf] Instruction Manual
SBT, QWI-SBT, QWISBT, SBT4, Bluetooth Controller with AUX Input Marini Garde
Construction, SBT4 Bluetooth Controller with AUX Input Marini Garde
Construction
---|---
|
MEMPHIS SBT4 Bluetooth Controller with AUX
Input
[pdf] User Guide
SBT4 Bluetooth Controller with AUX Input, SBT4, Bluetooth Controller with AUX
Input, Bluetooth Controller, AUX Input