FPS-3 FLEXTOOL PORTASCREED Instructions

FLEXTOOL PORTASCREED ® FPS-3
OPERATING INSTRUCTIONS
Version 2.0 (May 2022)

INTRODUCTION

Thank you for your selection of Parchem equipment.
Parchem has specialized in the design and manufacture of quality products since 1951.
We have taken care of the assembly and testing of this product.
Should service or spare parts be required, prompt and efficient service is available from our branches.
General Safety Instructions for the Operation of Power Equipment.
The goal of Parchem is to produce power equipment that helps the operator work safely and efficiently. The most important safety device for this or any tool is the operator.
Care and good judgment are the best protection against injury.
All possible hazards cannot be covered here, but we have tried to highlight some of the important items, individuals should look for and obey Caution, Warning, and Danger signs placed on equipment, and displayed in the workplace. Operators should read and follow safety instructions packed with each product.
Learn how each machine works. Even if you have previously used similar machines, carefully check out each machine before you use it. Get the “feel” of it and know its capabilities, limitations, potential hazards, how it operates, and how it stops.

APPLICATIONS

•  Compaction of concrete slabs
•  Precast sections
• Roadways
•  Warehouse floors

FUNCTION AND CONTROLS

MOTOR
The motor is controlled by an ON/OFF switch or push button VVhich is mounted on the handle.
The motor speed is controlled by a throttle lever mounted on the handle.
The motor is a 4-stroke unit and must only be used Unleaded.

FEATURES

Adjustable Handles

HAZARDS AND RISKS

NEVER allow any person to operate the machine without adequate instruction.
ENSURE all operators read, understand, and follow the operating instructions.
SERIOUS INJURY could result from improper or careless use of this machine.

! MECHANICAL HAZARDS
DO NOT operate the machine unless all protective guards are in place.
KEEP hands and feet clear of rotating and moving parts as they will cause injury if contacted.
ENSURE that the motor operation switch is in the OFF position and the spark plug ignition lead is disconnected before removing the guards or making adjustments.
DO NOT leave the machine in operation while it is unattended.
EXERCISE CARE VVhen operating unit. Exposure to vibration or
repetitive work actions may be harmful to hands and arms.
NEVER stand on the unit while it is operating.
BE CAREFUL not to come in contact with the muffler when the engine is hot since it can cause severe burns.
ENSURE that repairs to the motor and machine are carried out by COMPETENT personnel.
! FIRE & EXPLOSION HAZARDS
PETROL is extremely flammable and explosive under certain
conditions.
ENSURE that petrol is only stored in an approved storage
container.
DO NOT refuel the motor while it is in operation or hot.
DO NOT refuel the motor in the vicinity of sparks, a naked flame, or a person smoking.
DO NOT overfill the fuel tank and avoid spilling petrol when refueling. Spilled petrol or petrol vapor may ignite. If spillage occurs, ensure that the area is dry before starting the motor.
ENSURE that the fuel tank cap is securely fitted after refueling.
I CHEMICAL HAZARDS
DO NOT operate or refuel a petrol motor in a confined area without adequate ventilation.
CARBON MONOXIDE exhaust gases from internal combustion motor-driven units can cause death in confined spaces.
! NOISE HAZARDS
EXCESSIVE NOISE can lead to temporary or permanent loss of hearing.
WEAR an approved hearing protection device to limit noise exposure. As required by Occupational Health and Safety regulations.
PROTECTIVE CLOTHING
ALWAYS wear protective clothing and footwear to prevent the skin from coming into contact with wet concrete.
PROTECTIVE FOOTWEAR should be worn to reduce injuries from penetration through the sale, contact with culling objects, slipping, contact with wet concrete, and electrical hazards.
GOGGLES for eye protection may also be necessary.
USE waterproof protection for hands and knees (if kneeling) VVhen concreting. If your clothing becomes wet from concrete contact make sure you change the clothing.
Do not walk about waiting for it to dry.
! ADDITIONAL HAZARDS
Slip/Trip/Fall is a major cause of serious injury or death.
Beware of uneven or slippery work surfaces.

OPERATION

USING THE VIBRATING-BEAM SCREED
Once the concrete, with its surcharge, has been spread, start the motor and manually pull the beam along with the slab. Make sure that there is always a continuous surcharge along the entire length of the leading edge.
Generally, one steady pass with the screen should be enough to compact and level the concrete.
The vibration of the concrete is still necessary to bring air bubbles to the surface.
Start the motor using the recoil starter. (If the motor is fitted with an on/off switch this must first be turned to ON before starting.)
ALWAYS maintain good footing so that you do not slip and lose control when starting or operating the machine.

CARE AND PREVENTIVE MAINTENANCE

Inspect the rubber anti-vibration mounts for wear or deterioration.
Clean the aluminum beams regularly to prevent a build-up of concrete residue.

SERVICE

Inspect, clean, and/or replace the motor air cleaner regularly, particularly when operating in a dusty environment.
Inspect, clean, and/or replace the spark plug regularly Check all fasteners for tightness as the machine is subject to vibration.
To test run the screed support the beams on resilient support at each end. (eg. use two car tires.)

CLEANING AND STORAGE

Keep the unit clean and free of concrete residue.
Ensure the cooling fins on the motor are kept unobstructed.

FLEXTOOL PORTASCREED ®

Model| Operating
Weight (kg)| Engine
Make| Engine Model| Max Rated
Power (hp)| Fuel Type| Shipping
Dimensions
(L x W x H) (mm)| Shipping Weight (kg)| Product Code| Barcode
---|---|---|---|---|---|---|---|---|---
FPS-3| 16| Honda| GX35| 1.5| Petrol| 600 x 440 x 690| 18| FT201833-UNIT|

FLEXTOOL PORTASCREED ® – EXTRUSION BLADES

Parchem Construction Supplies Pty Ltd
1956 Dandenong Road, Clayton VIC 3168, Australia
Phone: 1300 353 986
flextool.com.au
ABN 80 069 961 968
This manual summarises our best knowledge of the product based on the information available at the time of publication. You should read this manual carefully and consider the information in the context of how the product will be used. Our responsibility for products sold is subject to our standard terms and conditions of sale.
DISCLAIMER:
Any advice, recommendation, information, assistance, or service provided by us in this manual is given in good faith and is believed by us to be appropriate and reliable.
However, any advice, recommendation, information, assistance, or service provided by us is provided without liability or responsibility PROVIDED THAT the foregoing shall
not exclude, limit, restrict or modify the right entitlements and remedies conferred upon any person or the liabilities imposed upon us by any condition or warranty implied by Commonwealth, State or Territory Act or ordinance void or prohibiting such exclusion limitation or modification. The product can be expected to perform as indicated in this manual so long as the operation and operational procedures of the individual products are followed as recommended in this manual.
Design and technical specifications may be subject to changes.
© This publication is copyright. All rights are reserved. Flextool and PortaScreed are registered trademarks of Parchem Construction Supplies Pty Ltd.

FOR MORE INFORMATION
CONTACT US ON 1300 353 986 OR VISIT
flextool.com.au

References

• Concrete Equipment and Tools - From Site Preparation to Surface Preparation | Flextool

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>