iKF King Pro Bluetooth Headphone User Manual

BLUETOOTH HEADPHONE

King Pro Bluetooth Headphone

Please read this manual carefully before you operating
You set and retain it for future reference
Welcome
Official package including
Headphone1
Charging cable1
AUX audio cable1
External microphone1
User manual*1

Before use

Important Safety Instructions

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Only use attachments/accessories specified by the manufacturer.
8. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in anyway, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

WARNINGS/CAUTIONS

• Do NOT use the headphones at a high volume for any extended period.

• To avoid hearing damage, use your headphones at a comfortable, moderate volume level.

• Turn the volume down on your device before placing the headphones on your ears, then turn the volume up gradually until you reach a comfortable listening level.

• Do NOT use your headphones while driving for phone calls or any other purpose.

• Do NOT use the headphones with noise canceling on at any time the inability to hear surrounding sounds may present a danger to yourself or others, e.g., while riding a bicycle or walking in or near traffic, a construction site or railroad, etc., and follow applicable laws regarding headphone use.

• Remove the headphones, or use the headphones with noise cancelling off and adjust your volume, to ensure you can hear surrounding sounds, including alarms and warning signals.

• Be aware of how sounds that you rely on as reminders or warnings may vary in character when using the headphones.

• Do NOT use the headphones if they emit any loud unusual noise. If this happens, turn the headphones off and contact iKF customer service.

• Remove headphones immediately if you experience a warming sensation or loss of audio.

• Do NOT use mobile phone adapters to connect headphones to airplane seat jacks, as this could result in injury or property damage due to overheating.

• Do NOT use the headphones as aviation communication headsets.
  Contains small parts which may be a choking hazard. Not suitable for children under age 3.
  This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device.

• To reduce the risk of fire or electrical shock, do NOT expose this product to rain, liquids or moisture.

• Do NOT expose this product to dripping or splashing, and do not place objects filled with liquids, such as vases, on or near the product.

• Do NOT make unauthorized alterations to this product.

• Use this product only with an agency-approved power supply that meets local regulatory requirements (e.g., UL, CSA, VDE, CCC).

• If the battery leaks, do not allow the liquid to come in contact with the skin or eyes. If contact is made, seek medical advice.

• Do not expose products containing batteries to excessive heat (e.g. from storage in direct sunlight, fire or the like).

• Do NOT wear the headphones while charging.

• The headphones do not play audio while charging

Getting assistance.
For assistance with this product, please contact our customer service at the website where you purchased the product, leave a message or email us, we will answer as soon as possible.
Company: Shenzhen Oumu Technology Co., Ltd.
Address: Room 315- 318, Building D, Nanxin Industry International, Nancheng District, Dongguan City, Guangdong Province, China
Website: http://ikf.net.cn
Email : supportikf@163.com

Overview

Specifications

Model: Bluetooth version: V5.3
Power input: DC 5V Input parameters: 500MA
Noise reduction depth: – 38dB
Charging interface: TYPE- C USB
Ive Battery capacity: 1000mAh
Charging time: about 2 hours
Supporting agreement: HSP/HFP/A2DP/AVRCP

How to charge

For the first time use, please fully charge the product.
Charging: The power indicator light is solid red
Full power: The red light of the power indicator is off
Charging time : 2 hours
Low battery alarm: Voice prompt once when the battery is low.

Warnings

When charging the headset,to avoid damage to the battery, it is recommended to use a 5V/2A charging head to charge.
The power of the charging head should not exceed 24W.
Avoid using car charger/fast charging power bank or charging head with unknown power for charging, there may be situations where charging cannot be performed or the power consumption is too fast and the signal is poor.

Instruction

Headphone Status

LED indicator
Tur on: Signal light flashing white and green
Turn off: The signal light is white for 2 seconds
Connection succeeded: light is not on
Incoming call status: Green light is on every 10 seconds
(When a call comes in, it will prompt the ringtone of the mobile phone synchronously, if the mobile phone does not support synchronizalion ringtone, prompt tone “Didididididi”)
How to Check the Battery Status of Headphones
After power on, click tne ANC button, the power indicator will light up for 2 seconds
Green light flashes 4 times slowly: 75%- 100%
Green light flashes 3 times slowly : 50%- 74%
Green light flashes 2 times slowly : 25%- 49%
Green light flashes 1 times slowly : <24%
Please charge the headset in time when the red light appears
Turn on and Turn off
Turn on: Long press the power button 2 seconds and
hear the prompt “kaiji” that it is turned on;
Turn off: Long press the power button 3 seconds and
hear the prompt “guanji” that it is turned off;

How to connect

1. Long press the power button 2S and hear the English Dot prompt “Power on” that it is turned on;
2. Open the Bluetooth interface of the mobile phone, Lon search for “iIKF- King Pro”, click to connect;
3. After the first pairing and connection is successful, the Clic headset will automatically connect to the last mobile phone with a connection record every time it is turned on, and Clic there is no need to repeat pairing.

Call with headset

Listen to music with headset

Three modes switch
[Long press] “ANC” button for 2 seconds
Cycle through “Music Mode/ANC Made/Ambient Sound Mode
Note: After plugging in an external microphone, ANC mode cannot be turned on Turn on /Turn off game mode
3 click the “ANC” button, and you will successfully enter the game mode when you hear the prompt sound ;
3 click the “ANC” button, and you will successfully exit the game mode when you hear the prompt sound;

Wired connection

Use the audio cable to connect a non- wireless device or if the headphone battery is depleted.

1. Insert the cable into the 3.5 mm jack on the right earcup.
2. Insert the other end of the cable into the 3.5 mm jack on your device.

*Bluetooth cannot be turned on under wired connection

External microphone

Insert the configured microphone into the microphone jack,Calls/voices are clearer.
There may be third- party software incompatibility problems during the use of the external Microphone, resulting in the inability to receive audio, and the actual experience may be slightly different.

TIPS

1. Make sure the headset and the connected device are ‘ within a valid connection range and there are not too many obstacles that interfere with the signal; |

2. lt is normal for the headset to be disconnected ( occasionally. Just like WiFi, occasionally the connection is , unstable. It may be due to interference in signal) transmission. Please wait a moment or change the location to resolve;

3. When the headset cannot be connected to the device, please check whether the headset has power or is connected to other devices;

4. Please fully charge the Headphone once a monih. If the Headphone isnot used for a long time, the battery of the Headphones may be damaged.

5. The sound insulation and sound leakage of headphones are related to the way of wearing the headphones and the volume of the headphones.
   You can adjust the wearing angle and degree of ear wrapping of the headphones in time according to the actual comfort of use. Please close the ear/nead foam part of the headphone as much as possible. ,

6. Please use a standard- compliant charging head to , charge the headset.

7. Do not wear the product for bathing, or use it in the ; rain, and do not soak the product in water. After each normal use, it is recommended to dry the sweat or stains on the headphone with a dry cloth, paper towel, etc., and then store it.

Limited warranty

Warranty period: 1 year from the date of product receipt During the warranty period of the product, due to the quality tr of the product itself, please contact us with the warranty card al and shopping records to receive a return authorization / free maintenance and shipping instructions.
Fault Table

1, Bluetooth headset cannot hear sound;

2, The other side cannot hear the voice during the call;
3, Unable to charge Bluetooth headset

The following conditions will not provide free repair

1. Unauthorized maintenance, misuse, collision, neglect, abuse, accident, alteration, or damage or alteration of the appearance of the product;
2. The product exceeds the warranty period specified by the company;
3. Damage caused by self- disassembly;
4. Failures caused by accidents such as water ingress or falling, squeezing, etc;
5. Normal wear and dirt caused by use, Such as scratches, damage caused by contact with chemical reagents, contact with sharp objects, etc;
6. Outer packaging and accessories, gifts, services other than the products promised by the sales staff, and additional configurations and gifts;
7. Improper storage: If the product is exposed to abnormal humidity and temperature for a long time, the performance is damaged;
8. Failure or damage caused by force majeure;

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and (2)
2. this device must accept any interference received, including
3. interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does.
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>