Aodehong Electronic CX05 3 In 1 Magnetic Wireless Charger User Manual

Aodehong Electronic CX05 3 In 1 Magnetic Wireless Charger User Manual

Product Introduction

The product is a 3-in-1 wireless charging pad, preferred smart chip , and supports mobile phones、smart watches, earphones. Achieve high efficiency, stable performance, put it on and charge, easily enjoy wireless charging technology life. It can also wirelessly charge mobile phones or other electronic devices that support Qi standard.

Specification

• Model: CX05
• Input: QC/PD 18W Type-C
• Output: 5W/7.5W/10W/15W (Smart Phone)
• Output: 5W (Earphone)
• Output: 2.5W(Smart Watch)
• Conversion Effciency: 80%-85%
• Materials: ABS+PC+Metal
• Size: 227.587.519.5mm
• Weight: 248g
• Working frequency: 110-205kHz

Compatibility

1. Smart Phone
   For Apple: iPhone 14 / iPhone 14 Pro / iPhone 14 Pro Max / iPhone 14 Plus / iPhone 13 / iPhone 13 Pro / iPhone 13 Pro Max / iPhone 13 mini / iPhone 12 / iPhone 12 Pro / iPhone 12 Pro Max / iPhone 12 mini (Case compatilility: Non- metallic Case thinner than 4mm your device.)

2. Watch
   Apple Watch Series 2 / 3 / 4 / 5 / 6 / 7 / 8 / SE / Ultra

3. Earbuds
   AirPods 2 (with wireless case) / AirPods Pro / AirPods Pro2 / AirPods 3

Charging Method

1. Lay flat Mode: Lay the device flat on the charging pad(device must be centered on the charging pad).
   

2. Hover Mode: In this mode，you can adjust the angle of the iPhoen at will,and even rotate it at will. Not only can it be charged, it can also be used as a cell phone holder.
   

FCC Warning Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must acceptany interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more ofthe following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the device into an outlet on a circuit different from that to which the receiver is device.
• Consult the dealer or an experienced radio/TV technician for help.

The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.

IC Warning Statement

This device contains licence-exempt transmitter(s)/ receiver(s)/ that comply with Innovation Science and Economic Development Canada’s licence- exempt RSS(s). Operation is subject to the following two conditions:
This device contains licence-exempt transmitter(s)/receiver(s)/ that comply withInnovation Science and Economic Development Canada’s licence-exempt RSS(s).

Operation is subject to the following two conditions:

1. this device may not cause interference and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

Radiation Exposure: This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment; To maintain compliance with IC’s RF Exposure guidelines, This equipment should be. installed and operated with minimum distance of 10cm the radiator your body.This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

Safety Notice

1. Please do not pull the power cord strongly to avoid the power cord breakage or fall off.
2. Do not disassemble or put into fire or water to avoid short circuit and leakage.
3. Do not use the product in severe heat, humidity or corrosive environment to avoid damage to the circuit leakage.
4. Please do not give children to play to avoid unnecessary accidents.
5. When using fast charging, please use qualified QC3.0 charging power adapter and fast charging cable, otherwise it may cause charging instability.
6. Please do not put metal debris or magnetic cards on the charging board, which may cause damage or abnormalities to the charger.
7. If you encounter the receiving coil or transmitting board overheating during use, resulting in stopping charging, please remove the charging product, wait for it to cool down, and then try charging again.

Package List

1. 3 in 1 wireless charger * 1
2. Type-C charging cable * 1
3. 18W adapter * 1
4. User manual * 1

FAQ and Solution

1.Is the phone not charging?

The phone is not aligned with the sensing area or the receiving coil is not installed correctly.

2.Heats up while charging?

It is normal for the receiving coil or the transmitting board to heat up during the wireless charging process.

3.Phone charging intermittently?

A. If the charging current of the adapter is not enough or the voltage is unstable, please use the QC3.0 fast charging adapter to charge. B. The charging position is too biased, and the electromagnetic induction is not good. The charging position can be adjusted.

4.The main unit indicator light is normal, but the mobile phone does not

work?

The receiving coil of the mobile phone is faulty, it is recommended to update the receiving coil or repair the mobile phone (built-in receiving coil).

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>