ZOSI P WiFi NVR User Guide

: June 29, 2024
: ZOSI

What’s in the box

Note: Products and accessories vary by product models, please refer to the actual product.

Introduce the NVR

NOTE: The actual appearance and components may vary with different products, please refer to the actual product.

Connection Diagram

① Connect the NVR to the Router with Ethernet Cable.
② Connect the NVR to the Monitor with HDMI Cable or VGA Cable. (VGA Cable is not included)
③ Connect the USB Mouse to the USB2.0 Port.
④ Connect the NVR to the Power Supply.
⑤ The monitor will display live view of the camera.

NOTE: To ensure the device works properly, it is recommended to power on the NVR first for testing before a final installation.

Access the System via Smartphone or PC

Smartphone

Search “Zosi Smart” in the App Store or use a browse to scan the QR code below, download and install the App and follow the instruction to register an account.

PC

Download path: Go to https://www.zositech.com/app/

System Settings

Mouse Operation

Left Button：

Preview or Playback Interface: Double-click a single channel to enter full screen and double-click to exit full screen.
Navigation Menu: Left click to select a menu option.

Right Button：

Right click to bring up the main menu when the mouse is on the preview interface.
Navigation Menu: Right click to exit the menu or return to previous menu option.

Right-click anywhere on the screen to open the menu bar.

Single: Select single channel for live viewing
Multi: Select multi-channel for live viewing
Start Scan: Start/Stop Scan
Colour: Adjust colour and image settings
E-Zoom: E-Zoom the preview interface
Audio: Adjust the camera volume
PTZ: Control the rotation of PTZ camera
Snap: Snap and save the live view images
Stop Record: Start/Stop record
Playback: Search video playback and quick playback
Intelligent Alarm: Set up Human Detection and Siren-Light Alarm
IPC Channel Configuration: IPC channel configuration management
Main Menu: Ether the Main Menu

System Password

The factory default username is “admin” and the password is empty, so the first time users can login the system directly.

Change Password Path: Right click the mouse-Main Menu-Setup-Users-Change Password
NOTE: The new password setting cannot be less than 6 characters, please keep the password properly.

Date & Time Setting

Right click the mouse – Main Menu – Setup – Basic – Date & Time – Choose the corresponding time according to your region and then click “Apply” to save. NOTE: The default time zone is GMT, please choose the corresponding time according to your region.

Video Playback

Right click the mouse – Playback – Video Playback/Quick Playback, Video Playback: Playback the video clips via time search or event search. Quick Playback: Quick playback of the first 30 minutes of video.

Backup : Enter the backup page.
Fast Forward: Play video clips at speeds ranging from 1/16x to 16x.
Rewind : Play video clips in reverse at speeds ranging from 1/16x to 16x.
Speed down: Play the video from the previous 30 minutes.
Speed up: Play the video from the next 30 minutes.

Backup

①Insert a USB into the USB 2.0 port on the NVR
② Right click the mouse > Main Menu > Backup > Select channels and time period > Search > Select the video clips you want to back up > Click “Apply”.

For more information about the system operation settings, please visit: https://blog.zositech.com/zosi-wifi-nvr-operate-guide/

The device interface would be slightly different from the interface in the video due to different devices. Follow the steps in the video to perform similar operations.

Usage Specification

Use the camera only with compatible ZOSI NVRs.
Read this guide carefully and keep it for future reference.
Follow all instructions for safe use of the product and handle with care.
Use the product within given temperature, humidity, voltage level noted in the device’s specifications.
Do not disassemble the product.
Use only a regulated power supply with the product (optional). Use of a nonregulated, non-conforming power supply can damage the product and void the warranty.
Periodic cleaning may be required. Use a damp cloth only. Do not use any harsh, chemical-based cleaners.
Do not use the product in a sealed, humid environment. It is recommended to place it in a location that is easily ventilated for installation.
Do not disassemble the device while power is on.

FAQ

Q: No Video Output on the Monitor?

Ensure the lowest resolution of the monitor is no less than 720p.
Ensure the NVR is powered on normally.
Check the connection of the HDMI/VGA cable or use another cable to try again.

Q: Failed to Remotely Access the Camera via Mobile Phone or Computer?

Ensure the NVR is connected to the network normally, you can go to the NVR Menu-Network-Test.
Test and verify whether you can access the Internet by connecting your phone or computer to the same network as the NVR.
Reboot your NVR or router.

Q: Does the system support motion detection and image capture?

It captures images automatically when people, cars, are detected or when there is a change in detected images. Users can also manually capture images using our ZOSI Smart APP.

Notification of Compliance

FCC Compliance Statement

This device complies with Part 15 of FCC Rules

Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including inference that may cause undesired operation.

Simplified EU Declaration of Conformity

ZOSI declares that the device is in compliance with the essential requirements and other relevant provisions if Directive 2014/53/EU.

Correct Disposal of this Product

This marking indicates that this product cannot be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal and promote the sustainable reuse of material resources, please recycle it responsibly. To return your used device, please visit the Return and Collection System or contact the retailer from whom the product was purchased. They can take this product away for environmentally safe recycling.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Warning Statements:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).

Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.