Shark DRA SMART FISHING DRONE User Guide

: June 5, 2024
: Shark

Table of Contents

Shark DRA SMART FISHING DRONE
SHARKX
Remote Control
Installation of the SHARKX
Preparation of the Remote Control
Preloading the Map on the App
Rippton App Function
Specifications
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Shark DRA SMART FISHING DRONE

Notice this manual is for the SharkX but also applicable to the SharkX Plus and the SharkX Pro. The SharkX is the basic model while the Plus and the Pro are upgraded versions so they include additional functions and features. Therefore, all the charts and graphics in this manual are just for a general reference and should be subject to actual applications and updates.

SHARKX

SHARKX is a professional smart fishing drone, which is capable of lifting up to 3 KG baits over the water where you go fishing. Together with the use of the ‘RIPPTON’ App, SHARKX can fly to any fishing spots within a distance of 1 KM away from the home point by tapping the GPS map on the ‘Rippton’ app, and all mission spots will be saved automatically after the missions have been completed.

Remote Control

The remote control allows users to fly the SHARKX to as far as 1 KM, with the buttons and dials for power on/off, hook releasing and return to the home point.

Controls
Using remote control joysticks for vertical and horizontal flying, and locking and unlocking the drone.

Using remote control to open and close the hook release mechanism

Installation of the SHARKX

Preparation of the Remote Control

Preloading the Map on the App

When using the SHARKX in any new areas, it’s always necessary to enter the ‘Rippton’ app with network connection and finish preloading the map before connecting the SHARKX to your mobile device. Connect the SHARKX to Your Mobile Device

Notice before launching the SharkX, please make sure the satellite number is no less than 15, otherwise the drone will not take off successfully

Rippton App Function

Charging

It normally takes approx. 2 hours to fully charge the drone battery.
It normally takes approx. 3.5 hours to fully charge the remote control.

Notice regularly charge both the drone battery and remote control every two months to avoid over-discharging, which may cause the batteries not to charge. For more details about SHARKX Preface, Description of the Product, Preparation and Installation, Operation/Use, Maintenance, Troubleshooting and Repair, Disposal information etc., please refer to the User Manual.To watch the video of installation, app operation process, compass & IMU calibration, please scan the QR code below For more information about Rippton, please scan the QR code below

Useful Tips:

How to use the RC to take over when the drone is controlled via the App?
To use the remote control to take over from the app control, toggle the lever to ‘Alt Hold’ and then back to ‘Pos Hold’ on the remote control.
How to interrupt the ongoing automatic mission execution and start a new mission?
Two ALTERNATIVE ways of stopping the automatic mission execution:tap the ‘Mission Selection’ icon on the flying control interface; ORt oggle the lever to ‘Alt Hold’ and then back to ‘Pos Hold’ on the remote control.

Notice it’s recommended not to tap any icon on the interface during the automatic mission execution unless you decide to start a new mission.
Start a new mission:

tap ‘Mission Selection’ to a start a new mission.
slide to start.

Safety Notice
It’s recommended to always keep the SHARKX within your visual range. Do not pull the fishing line if it got snagged with the drone. It may break the drone’s balance.