bas-IP AT-07L IP Indoor Video Entry Phone User Manual

Table of Contents

bas-IP AT-07L IP Indoor Video Entry Phone-fig1

Full User Manual
wiki.bas-ip.com

7″ IP indoor video entry phone with IPS screen, resolution 1024×600 and the ability to connect alarm sensors and with connecting the doorbell.
The indoor video entry phone works on the Android 6.0 operating system. It comes in 3 color variations: White, Gold, Black and has two installation options: wall mount and ﬂush mount, using a special bracket.

bas-IP AT-07L IP Indoor Video Entry Phone-fig4

Before installing the monitor, be sure to check that it is complete and all components are available.
The monitor kit includes:

Monitor :1 pc
Manual :1 pc
Wall / flush mounting bracket: 1 pc / 1 pc
Set of wires with connectors for connection of alarm loops, doorbell and home automation: 1 pc
Resistors for alarm loops: 8 pcs
Installation screws: 2 pcs

After verifying the device’s completeness, you can switch to the monitor connection.
To connect monitor you will need:

An Ethernet UTP CAT5 or higher cable connected to a PoE switch or to a normal switch/router.
Cable length recommendations:
The maximum length of the UTP CAT5 cable segment shouldnot exceed 100 meters, according to the IEEE 802.3 standard.
Power supply at +12 Volts DC if there isn’t PoE.
Wires must be brought for the connection of alarm loops and home automation (optional).

Before mounting the monitor, a hole or recess in the wall with dimensions of 222 × 114 x 60 mm (for ﬂush mounting) must be provided. It is necessary for switching of wires and installation of the monitor.
Attach the bracket in the outlet box using set screws and a phillips head screwdriver.
Installation of the monitor on the bracket is done from top to bottom.

With following stated terms of warranty is familiar, functional test was performed in my presence:
Customer signature

The warranty period of the product — 36 (thirty-six) months from the date of sale.

Transportation of product must be in its original packaging or supplied one by the seller.
The product is accepted in warranty repair only with a properly ﬁlled warranty card and the presence of intact stickers or labels.
The product is accepted for examination in accordance with the cases provided by law, only in the original packaging, in a full complete set, appearance corresponding to the new equipment and presence of all relevant properly ﬁlled documents.
This warranty is in addition to the constitutional and other consumer rights and in no way restrict them.

Terms of warranty

The warranty card must indicate the name of the model, serial number, purchase date, name of the seller, seller company stamp and the customer’s signature.
Delivery to the warranty repair is carried out by the buyer himself.
Warranty repairs carried out only during the warranty period speciﬁed in the warranty card.
The service center is committed to do everything possible to carry out the repair warranty products, up to 24 working days. The period spent on the restoration of product functionality is added to the warranty period.