BAS-IP AT-10 INDOOR VIDEO ENTRY PHONE User Manual

: June 5, 2024
: bas-IP

Table of Contents

Main features
Device description
Appearance
Electrical connection
Mechanical mounting
Documents / Resources

USER MANUAL
AT-10

IP INDOOR VIDEO ENTRY PHONE

Main features

Display: 10” IPS LCD, capacitive touchscreen.
Screen resolution: 1280 x 800.
Built-in camera: Yes.
Power: PoE and + 12 Volts.
Power consumption: 6 W, standby 2.5 W.
Dimensions: 303 x 170 x 23 mm.
Colors: White, Black, Gold.
Body: Aluminum.
Installation Type: Wall mount, ﬂush mount with a special bracket.

IP INDOOR VIDEO ENTRY PHONE

https://wiki.bas-ip.com/en/internal-monitors-2752663.html

AT-10

Device description

10″ IP indoor video entry phone with IPS screen, Wi-Fi, resolution 1280×800, and the ability to connect alarm sensors.
The indoor video entry phone works on the Android 6.0 operating system. It comes in 3 color variations: White, Gold, Black and has two installation options: wall mount and ﬂush mount, using a special bracket.

Appearance

Camera.
Loudspeaker.
Screen.
Microphone.
MicroSD slot.
MicroUSB port.

EAN: 5060514910405 (BLACK)
EAN: 5060514910412 (WHITE)
EAN: 5060514910429 (GOLD)

Completness check of the product
Before installing the monitor, be sure to check that it is complete and that all components are available.

The monitor kit includes:

Monitor	1 pc
Wall and ﬂush mounting brackets	1 pc
Manual	1 pc

Set of wires with connectors for connection of alarm loops, external dynamics, and home automation| 1 pc
Resistors for alarm sensors| 8 pcs
Installation screws| 2 pcs

Electrical connection

After verifying the device’s completeness, you can switch to the monitor connection.
To connect monitor you will need:

An Ethernet UTP CAT5 or higher cable is connected to a PoE switch or to a normal switch/router.

Cable length recommendations
The maximum length of the UTP CAT5 cable segment should not exceed 100 meters, according to the IEEE 802.3 standard.

Power supply at +12 Volts DC and 2 Ampers.
Wires must be brought for the connection of alarm loops and home automation (optional).

Mechanical mounting

Before mounting the monitor, a hole or recess in the wall with dimensions of 298 х 162 х 36 mm (for ﬂush mounting) must be provided. It is necessary for switching of wires and installation of the monitor.
Attach the bracket on the outlet box using set screws and a phillips head screwdriver.
Installation of the monitor on the bracket is done from top to bottom.

Flush mounting

Surface mounting

Monitor| Flush bracket|

Surface bracket

---|---|---

Warranty
The warranty card number
Model name
Serial number
Seller name
With the following stated terms of warranty is familiar, a functional test was performed in my presence:
Customer signature
Warranty conditions
The warranty period of the product — 36 (thirty-six) months from the date of sale.

Transportation of product must be in its original packaging or supplied one by the seller.
The product is accepted for in-warranty repair only with a properly ﬁlled warranty card and the presence of intact stickers or labels.
The product is accepted for examination in accordance with the cases provided by law, only in the original packaging, in a full complete set, appearance corresponding to the new equipment, and the presence of all relevant properly ﬁlled documents.
This warranty is in addition to the constitutional and other consumer rights and in no way restrict them.

Terms of warranty

The warranty card must indicate the name of the model, serial number, purchase date, name of the seller, seller’s company stamp, and customer’s signature.
Delivery to the warranty repair is carried out by the buyer himself.
Warranty repairs are carried out only during the warranty period speciﬁed in the warranty card.
The service center is committed to doing everything possible to carry out the repair warranty products, for up to 24 working days. The period spent on the restoration of product functionality is added to the warranty period.

Notes
…………………………………………………………..

https ://bas-ip.com/