BAS-IP SH-47T 0TOUCH-FREE BUTTON User Manual
- June 5, 2024
- bas-IP
Table of Contents
BAS-IP SH-47T 0TOUCH-FREE BUTTON
Main feature
- Touch-free stainless steel button.
- Power supply: +12 V DC (+ 1%, – 15%).
- Work resource: more than 100 million clicks.
- Protection class: IP68.
- Permissible humidity: 10% — 94%.
- Temperature condition: -27 — +60 °C.
- Contact closure time: 50 ms.
- Body: Metal.
- Colors: Black, Silver.
- Dimensions: 86 × 86 × 19.5 mm.
- Diameter: 59 mm.
- Wheelbase for mounting screws: 60 mm.
TOUCH-FREE BUTTON
Device description
BAS-IP SH-47T is a touch-free button for connecting to an individual or multi- apartment entrance panel with a resource of more than 100 million clicks. Operation at a distance up 15 to 25 cm.
Appearance
- Screw holes.
- Contactless button.
Completeness check of the product Before installation of the exit button, it is necessary to check that it is complete and all components are available.
Exit button kit includes:
- Exit button
- Manual
- Set screw kit
Electrical connection
After verifying the device’s completeness, you can switch to the exit button connection.
IMPORTANT
- It is strictly forbidden to supply more than + 12.2V to the SH-47T button.
- Do not load the output contact of the button with a current exceeding 100 mA.
- It is strictly forbidden to use the SH-47T button to use the power supply used to power the lock.
- It is necessary to use a separate power supply to which locks and other high-consumption equipment are not connected.
Purpose of wires
- Red: + 12V (+ 1%, – 15%).
- Black: Ground (General).
- Brown: Transfer to trigger mode.
- Green: Changes the backlight color to green.
- Yellow: Controlled output.
Mechanical mounting
Before mounting the exit button, a hole or recess in the wall with diameter 59 mm must be provided. It is also necessary to provide supply of a power cableand attendant connections or use installation boxes with 60 mm axial distance between fixing screws.
Exit button
Warranty
- The warranty card number
- Model name
- Serial number
- Seller name
- With following stated terms of warranty is familiar, functional test was performed in my presence:
- Customer signature
Warranty conditions
The warranty period of the product — 36 (thirty-six) months from the date of sale. Transportation of product must be in its original packaging or supplied one by the seller. The product is accepted in warranty repair only with a properly filled warranty card and the presence of intact stickers or labels. The product is accepted for examination in accordance with the cases provided by law, only in the original packaging, in a full complete set, appearance corresponding to the new equipment and presence of all relevant properly filled documents. This warranty is in addition to the constitutional and other consumer rights and in no way restrict them.
Terms of warranty
The warranty card must indicate the name of the model, serial number, purchase date, name of the seller, seller company stamp and the customer’s signature. Delivery to the warranty repair is carried out by the buyer himself. Warranty repairs carried out only during the warranty period specified in the warranty card. The service center is committed to do everything possible to carry out the repair warranty products, up to 24 working days. The period spent on the restoration of product functionality is added to the warranty period.