bas IP SH-46T Touch-Free Doorbell User Manual
- June 5, 2024
- bas-IP
Table of Contents
USER MANUAL
SH-46T
TOUCH-FREE DOORBELL
Main feature
- Touch-free doorbell with an ability to customize label.
- Power supply: +12 V DC (+ 1%, – 15%).
- Work resource: more than 100 million clicks.
- Degree of protection: IP68.
- Permissible humidity: 10% — 94%.
- Temperature condition: -27 — +60 °C.
- Response distance: 15 – 25 сm (depending on external conditions).
- Contact closure time: 50 ms.
- Body: Metal.
- Colors: Black, Silver.
- Dimensions: 95 × 190 × 19.5 mm.
- Diameter: 59 mm.
Device description
BAS-IP SH-46T — no-touch doorbell for connecting to the video or audio
intercom.
Due to the same size of the flush bracket, if necessary, the SH-46T can be
replaced with the BAS-IP AV-04FD outdoor panel. On the front panel of the
doorbell, there is a space to engrave the apartment number, name, or company
logo to identify the doorbell.
Appearance
- Screw holes.
- Contactless button.
Completeness check of the product
Before installation of the doorbell, it is necessary to check that it is
complete and all components are available.
Exit button kit includes:
Doorbell 1 pc
Flush mount bracket 1 pc
Set screw kit 1 pc
Manual 1 pc
Electrical connection
After verifying the device’s completeness, you can switch to the doorbell connection.
IMPORTANT
- It is strictly forbidden to supply more than + 12.5V to the SH-46TE bell.
- Do not load the output contact of the button with a current exceeding 100 mA.
- It is necessary to use a separate power supply to which locks and other high-consumption equipment are not connected.
Purpose of wires:
- Red: + 12V (+ 1%, – 15%).
- Black: Ground (General).
- Brown: Transfer to trigger mode.
- Green: Changes the backlight color to green.
- Yellow: Controlled output (when pressed, voltage is removed and the ground appears).
Mechanical mounting
Before mounting the door panel, a hole or recess in the wall with dimensions of 85 × 180 × 45 mm must be provided. It is also necessary to provide a supply of a power cable, additional modules, and the local network.
Warranty
The warranty card number
Model name
Serial number
Seller Name
With following stated terms of warranty is familiar, the functional test was performed in my presence: A customer signature
Warranty conditions
- The warranty period of the product — 36 (thirty-six) months from the date of sale.
- Transportation of product must be in its original packaging or supplied one by the seller.
- The product is accepted in warranty repair only with a properly filled warranty card and the presence of intact stickers or labels.
- The product is accepted for examination in accordance with the cases provided by law, only in the original packaging, in a full complete set, appearance corresponding to the new equipment and presence of all relevant properly filled documents.
- This warranty is in addition to the constitutional and other consumer rights and in no way restrict them.
Terms of warranty
- The warranty card must indicate the name of the model, serial number, purchase date, name of the seller, seller company stamp and the customer’s signature.
- Delivery to the warranty repair is carried out by the buyer himself.
- Warranty repairs are carried out only during the warranty period specified in the warranty card.
- The service center is committed to doing everything possible to carry out the repair warranty products, up to 24 working days. The period spent on the restoration of product functionality is added to the warranty period.