MIXX Integrated 10 PD Power Bank User Guide

: June 4, 2024
: MIXX

CHARGE

MIXX Integrated 10 PD Power Bank A1

Integrated 10 PD

Power Bank
WITH BUILT-IN CABLES

HOW TO GUIDE

THANKS!

Thanks for choosing our MIXX Integrated 10 PD Power Bank.

All of our products come with a 2 year warranty for peace of mind.

Feedback is welcome, email us on support@mixx-io.com for any comments or queries.

LET’S START

What’s in the box?
A MIXX Integrated 10 PD Power Bank

Power Button
USB C Input / PD Output Port
Lightning USB Output cable
USB C Output cable
Micro USB Output cable
USB A Input cable
USB A Output Port
Battery level digital display

LET’S POWER

Press the Power Button [1] to turn your MIXX Integrated 10 PD Power Bank on.

Check the battery status
The digital screen [8] shows the percentage of charge left on the Integrated 10 PD.

LET’S CHARGE THE INTEGRATED 10 PD

MIXX Integrated 10 PD Power Bank A5

Connect the Power Bank to a suitable USB wall charger or a computer USB port using the built-in USB A power cable [6] and your Integrated 10 PD will start charging.

Alternatively, you can use a USB C cable A (not included) and plug into the USB C Port [2] to charge the Integrated 10 PD.

If there is no phone or device detected to charge, the Power Bank will turn off automatically after 30 seconds.

LET’S CHARGE YOUR DEVICE

Using the built-in cables

You can charge your mobile devices and accessories using the built-in Micro [5] , USB C [4] and Lightning [3] Output cables.

Simply plug your device into the Power Bank using the cable with the correct connector, your device will start to charge and you should see your devices usual battery screen or icon as confirmation. If it does not begin to charge, press the power button [1] to turn on the Power Bank.

You can use all three Output cables to charge three different devices at the same time if required.

NEED EXTRA HELP?

Common solutions

If you are experiencing problems with your Power Bank:

Switch on the Power Bank (see page 3)
Check if the Power Bank is charged (see page 4).

FAQS

Q. How long will it take to charge the MIXX Integrated 10 PD Power Bank?
A. The charge time will vary depending on the power output of your charger. For a 10,000mAh capacity power it will take up to 6 hours.

Q. My device is not fast charging with the Power Bank?
A.

Make sure that you are connecting your device to the USB C port on the side of the powerbank (PD) or the USB A port on the side of the powerbank (QC) – the integrated cables do not support fast charging with PD or QC.
Make sure you are using a cable that supports PD or QC charging.
Unplug your device from the Power Bank and wait for the Power Bank to turn off after 30 seconds before trying again.
The Integrated 10 PD will only fast charge when one device is plugged into it for charging – if you are charging more than one device at the same time they will all charge at a low rate of between 6 and 9W (5V 1.2A ~1.5A).

CONTACT MIXX

Feedback is welcome simply email us on support@mixx-io.com or visit mixxcharge.com for more information.

TECHNICAL SPECS

USB C Input: 5V, 3A/9V 2A/12V 1.5A
USB C Output: 5V, 3A/9V 2.22A/12V 1.66A
USB Cable Input: 5V, 2.1A
Cable Outputs: 5V, 2.1A
USB A Output: 4.5V 5A/5V 4.5A/5V 3A/9V 2A/12V 1.5A
Capacity: 10,000mAh / 37Wh
Weight: 232g
Dimensions: 145 x 67 x 20mm

Compatibility

Suitable for most smartphones, accessories and other devices via Micro, USB C and Lightning power connectors.

LET’S BE SAFE

It’s important that you read this section completely, especially the ‘Warning, Caution and Safe Usage’ instructions.

For your protection

Before charging digital devices using the MIXX Integrated 10 PD Power Bank please ensure the device is correctly connected, using manufacturer’s original specification cables that came with the device.

Please keep the product out of reach from children and animals.

Do not drop, short circuit, disassemble or continue to use this product or charging cable if damaged.

Keep at least 20cm away from implantable medical devices (such as pacemakers and cochlear implants) to prevent potential magnetic interference.

NOTE:
If your product has become damaged in any way, does not operate normally or has been dropped, please refer to a qualified person to have the product checked before continuing to use it.

WARNING:
The operating temperature range for this product is 5º – 40º Celsius.

If the battery is ballooning, discharged or faulty, please stop using it immediately.

Please refer to the information on the safety labels on the product or its power supply before installing or operating the device.

The Power Bank and cable connectors are not water resistant and should not be exposed to rain, moisture, any splashing or liquid spills.

This may cause excessive heat and may lead to fire damage or personal injury.

CAUTION: This product contains a Lithium battery. Incorrect disposal of this battery may result in an explosion.

LET’S RECYCLE

This product can be recycled.

Products bearing this symbol must NOT be thrown away with normal household waste.

Take the product to a collection point designated for recycling of electronic devices. Find out more about return and collection points through your local authority.

To view our extensive wireless range of Headphones, True Wireless Earbuds, Earphones and Speakers simply visit us at
mixxaudio.com

MIXX Integrated 10 PD Power Bank B2

SAFE USAGE INFORMATION

Only use the correct voltage power supply and cable for your device. Use a certified or device manufacturer’s charging cables or quality cables such as MIXX Ultra Durable Cables.

support@mixx-io.com

mixxcharge.com

MIXX Limited
5 The Pavilions, Brighton Road, Pease Pottage,
West Sussex, RH11 9BJ. United Kingdom

IN10PD-HTG01