JBL PARTYBOX ON-THE-GO Party Speaker User Manual

: June 5, 2024
: JBL

Table of Contents

JBL PARTYBOX ON-THE-GO Party Speaker
Introductions Features
Wireless microphone spec
BLUETOOTH
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

JBL PARTYBOX ON-THE-GO Party Speaker

JBL-PARTYBOX-ON-THE-GO-Party-Speaker

Introductions Features

PARTYBOX ON-THE-GO

Power input: 100 – 240 V ~ 50/60 Hz
Built-in Battery: 18 Wh
Power consumption: 60 W
Total output power: 100 W RMS
Standby power consumption: < 2 W with BT connecting; < 0.5 W without BT connecting
USB output: 5 V 2.1 A
Speaker drivers: 1 x 5.25 in (133 mm) woofers + 2 x 1.75 in (44 mm) tweeters
Signal-to-noise (S/N) ratio: > 80 dBA
Frequency response: 50 Hz – 20 kHz
Battery charge time: < 3.5 hrs
Battery play time: < 6 hrs
Bluetooth version: 4.2
Bluetooth profile: A2DP v1.3, AVRCP v1.6
Bluetooth transmitter frequency range: 2.4 – 2.48 GHz
Bluetooth maximum transmitter power: 10 dBm (EIRP)
Bluetooth transmitter modulation: GFSK, π/4 DQPSK, 8DPSK
Bluetooth range: Approx. 10 m (33 ft)
USB format: FAT 16, FAT 32
USB file format: .mp3, .wma, .wav
Digital input: Bluetooth / USB -9 dBFS
Input sensitivity:
AUX in: 370 mV rms
Microphone: 20 mV rms
Guitar: 100 mV rms

Wireless microphone spec

Frequency response: 65 Hz – 15 kHz
Signal-to-noise (S/N) ratio: > 60 dBA
UHF frequency band: 470 ~ 960 MHz
Transmitter transmitting power: < 10 mW
Microphone battery play time: < 10 hrs
Distance between transmitter and receiver: < 10 m

BLUETOOTH

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
Note: The product is in compliance with the European Union energy legislation.

Bluetooth connection mode
The product is intended to be used for streaming music via Bluetooth connection. A consumer can stream Bluetooth audio to the speaker. When the product is connected through Bluetooth, the Bluetooth connection must remain active at all times to ensure proper operation.
The product will enter sleep mode (networked standby) after 20 minutes without operation. The power consumption in sleep mode is less than 2.0 Watts, after which it can be re-activated via Bluetooth connection.
Bluetooth disconnection mode
The product will enter standby mode after 20 minutes without operation. The power consumption in standby mode is less than 0.5 Watts.
The maximum operation temperature is 45 °C
No naked flame sources, such as lighted candles, should be placed on the apparatus.

This equipment is a Class II or double insulated electrical appliance
Wireless microphone users shall rely on the white space databases in part 15 to determine that their intended operating frequencies are available for unlicensed wireless microphone operation at the location where they will be used. Wireless microphone users must register with and check a white space database to determine available channels prior to beginning operation at a given location. A user must re-check the database for available channels if it moves to another location.
HA_JBLPARTYBOX ON-THE-GO QSG_Global_CR_V19