Esatto EUF92S 86L Upright Freezer User Guide
- June 5, 2024
- Esatto
Table of Contents
This little Quick Start Guide is everything you need to start chilling with
your
EUF92W & EUF92S 84L Upright Freezer!
QSG V2.0
EUF92S 86L Upright Freezer
Ice to meet you! Let’s get started with your
EUF92W or EUF92S 84L Upright Freezer!
The Thermostat Controls
Your fridge has one control for regulating the temperature. The temperature
control is located at the rear, near the compressor. Depending on your room’s
ambient temperature, you may need to adjust the temperature setting to achieve
your desired temperature.
The number on the thermostat dial does not directly represent the temperature.
Instead, the larger the number is, the lower the freezer interior temperature
will be.
→ Dial positions 1–2 will set your freezer to approximately -12°C
→ Dial positions 3–4 will set your freezer to approximately -15°C
→ Dial position 5–6 will set it to approximately -20°C
Your Bar Fridge
- Storage baskets (×3)
- Door
- Foot
- Top hinge assembly
- Bottom hinge assembly + foot
We’re on socials!
@esatto.house
@esatto.house
Installation Tips
- When starting up for the first time, keep the freezer upright for 2 hours before connecting it to a power supply.
- When you install your appliance, set the thermostat knob to position 6 for the first 24–48 hours, after which you can set it to the level that best suits your needs.
It is best to wait 24 hours before adding food. Please refer to your user manual pages 9–10 for detailed instructions.
Get in touch
Need help? Contact our friendly support team
via the contact details below.
Phone / 1300 11 4357
Email /
support@residentiagroup.com.au
How was your Esatto experience?
Share your story at esatto.house/review
Product Details
Size (mm) / 860H x 501W x 540D
Energy Rating / 3 Stars
Warranty / 2 Years