EDIFIER S3 Wireless Over-Ear Headphones User Manual

S3
Wireless Over-Ear Headphones
Manual

Power ON/OF

1. Power ON: Press and hold the MFB button for 3s when power OFF.
2. Power OFF: Press and hold the MFB button for 3s when power ON

Pairing

1. Press and hold the MFB button for 3s when power off. Red and Blue LED will blink alternately and rapidly.
2. Select “EDIFIER STAX SPIRIT S3” in your device setting to connect. Blue LED will blink twice per 5s after connected.

Note:

1. For subsequent use, the headset will auto-connect to the device used last time.
2. Press and hold the MFB button for 5s when power off to skip the latest connected device and pair the new Bluetooth device

Reset

1. Power on and disconnected to any Bluetooth devices.
2. Simultaneously press and hold the “+” “-” buttons for 5s to reset and start Bluetooth pairing.
3. Blue LED will blink 6 times rapidly when successful.

Dual Connectivity

1. Pair devise A with the headphone. Upon success, disconnect the Bluetooth of device A or power off the headphone and long-press the MFB button of headphones for 5s to enter the pairing mode.
2. Select “EDIFIER STAX SPIRIT S3” in device B to connect successfully.
3. Select “EDIFIER STAX SPIRIT S3” in device A to connect manually. Blue LED will blink twice per 5s when successful.

Charge

1. Please connect the product to the power source with the included Type-C charging cable for charging.
2. Red LED is steady lit when charging and off when fully charged.
   Input: 5V ****1.5A

 AUX Cable

1. Connect the AUX cable to the headphone when powered on, and the headphone will switch to the AUX-in the sound source state; connect the AUX cable to the headphone when powered off and the headphone will not power on automatically, need to press and hold the MFB button for 3s to turn on.
2. Unplug the AUX cable from the headphone and the headphone will power off automatically.
3. Green LED is steady lit when in the AUX-in sound source state.

Controls

Note:

1. : Press and hold.
2. Please do not charge the headset when there is sweat or other liquids inside the charging port, which may damage the headset.
3. Images are for illustrative purposes only and may differ from the actual product.
4.  Download Edifier Connect App for more customizable control settings.

Ear cushion replacement method

For more information, please visit our website: www.edifier.com Model: EDF200071
Edifier International Limited
P.O. Box 6264
General Post Office
Hong Kong
www.edifier.com
2022 Edifier International Limited. All rights reserved.
Printed in China
NOTICE:
For the need for technical improvement and system upgrades, the information contained herein may be subject to change from time to time without prior notice. Products of  EDIFIER will be customized for different applications. The pictures and illustrations shown in this manual may be slightly different from the actual product.
If any difference is found, the actual product prevails.

References

• Headphones, Speakers | A Passion for Sound -【Edifier USA】

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>