OMNITRONIC SHP-740DJ DJ Stereo Headphones User Guide
- June 5, 2024
- OMNITRONIC
Table of Contents
[
](https://manuals.plus/wp-content/uploads/2022/07/OMNITRONIC-SHP-
740DJ-DJ-Stereo-Headphones-logo.png)
OMNITRONIC SHP-740DJ DJ Stereo Headphones
Introduction
The Omnitronic SHP-740DJ are dynamic stereo headphones with a very high output power for DJ use. The powerful 40 mm neodymium magnet and a HQ voice coil provide for excellent sound with punchy bass and clear highs. The closed, circumaural design effectively isolates ambient noise. Collapsible, rotating earcups make for convenient single-side monitoring and space-saving transport.
Connect and Listen
Plug the audio cable into the 3.5 mm stereo jack input on the headphones and on your audio device. For locking the connection turn the plug to the right on the headphones. For unlocking turn the plug to the left. Turn down the volume before connecting the headphones. If the plug on the audio cable does not fit, use the adapter provided for 6.3 mm jacks.
Transport and Cleaning
For good transmission quality and the best possible comfort, the headband should be adjusted to properly fit your head. For space-saving transportation, the earcups can be tucked between the headband. Please use a soft lint-free and moistened cloth for cleaning. Never use alcohol or solvents!
Specifications
- Item number:
- 140003 39
- Transducer type:
- Dynamic, neodymium (NdFeB)
- Frequency range:
- 800- 35000 Hz
- Speaker:
- 40mm
- Impedance:
- 32
- Maximum input power:
- 1800 mW
- Sensitivity:
- 100 dB
- Cable length:
- 3m
- Connection:
- 3.5 mm/6.3 mm stereo jack plug
- Weight:
- 340 g
Subject to change.
Protecting the environment
When to be definitively put out of operation, take the product to a local recycling plant for a disposal that is not harmful to the environment. Devices marked with this symbol must not be disposed of as household waste. Contact your retailer or local authorities for more information.
2022 Omnitronic. All rights reserved.
Omnitronic is a brand of Steinigke Showtechnic GmbH
Andreas-Bauer-Str. 5 97297 Waldbüttelbrunn Germany