Klipsch R-51PM Powered Monitor Speakers Instruction Manual
- June 5, 2024
- Klipsch
Table of Contents
- Klipsch R-51PM Powered Monitor Speakers
- DISABLE / ENABLE DYNAMIC BASS EQ
- FACTORY RESET
- DISABLE AUTO-STANDBY
- REMOTE CONTROL CODES (FOR UNIVERSAL OR CABLE REMOTES)
- PRODUCT REGISTRATION
- IMPORTANT SAFETY INSTRUCTIONS!
- FCC AND CANADA EMC COMPLIANCE INFORMATION
- POWERED SPEAKERS/MUSIC SYSTEMS WARRANTY OPT-1ENGLISH – WARRANTY – U.S.
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Klipsch R-51PM Powered Monitor Speakers
DISABLE / ENABLE DYNAMIC BASS EQ
- Hold 3 Seconds
- Flashes x2
- Hold 3 Seconds
- Flashes x1
FACTORY RESET
- Select Source to Phono, Analog, Digital or USB
- Press and Hold
- Press
- Release
- Flashes 10 Seconds
NOTE Factory Reset will clear the Bluetooth® pairing history
DISABLE AUTO-STANDBY
REMOTE CONTROL CODES (FOR UNIVERSAL OR CABLE REMOTES)
RCA* | 41609 OR 43915 |
---|---|
DIRECTV | 31609 |
XFINITY** | 30531 OR 31023 |
BRIGHT HOUSE | 288 |
AT&T (SILVER) | 5156 OR 5023 |
AT&T (BLACK) | 5156 |
HEX CODES – SET 1
VOLUME UP| 0x 856A 9F60
VOLUME DOWN| 0x 856A 9E61
MUTE| 0x 856A 9966
HEX CODES – SET 3
VOLUME UP| 0x A55A 0AF5
VOLUME DOWN| 0x A55A 0BF4
MUTE| 0x A55A 12ED
HEX CODES – SET 4
VOLUME UP| 0x 859A 817E
VOLUME DOWN| 0x 859A 827D
MUTE|
PRODUCT REGISTRATION
Register your product online at www.klipsch.com/register
- Keep up-to-date on new products and promotions.
- Your personal information will never be resold.
- This registration information is not used for warranty purposes. Please retain your receipt for warranty claims.
IMPORTANT SAFETY INSTRUCTIONS!
-
READ these instructions.
-
KEEP these instructions.
-
HEED all warnings.
-
FOLLOW all instructions.
-
DO NOT use this apparatus near water.
-
CLEAN ONLY with dry cloth.
-
DO NOT block any ventilation openings. Install in accordance with the manufacturer’s instructions.
-
DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
-
DO NOT defeat the safety purpose of
polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. -
PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
-
ONLY USE attachments/accessories specified by the manufacturer.
-
USE ONLY with the cart, stand, tripod, bracket, or table specified the manufacturer, or sold with apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
-
UNPLUG this apparatus during lightning storms or when unused for long periods of time.
-
REFER all servicing to qualified service personnel. Servicing is required when apparatus has been damaged in any way, such as power-supply cord or plug
-
DO NOT expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the apparatus.
-
To completely disconnect this apparatus from the AC Mains, disconnect the power supply wall wart from the AC receptacle.
-
The mains plug/appliance coupler is used as a disconnect device, the disconnect device shall remain readily operable.
-
DO NOT overload wall outlets or extension cords beyond their rated capacity as this can cause electric shock or fire.
The exclamation point, within an equilateral triangle, is intended to alert
the user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product. The lightning flash
with arrowhead symbol within an equilateral triangle is intended to alert the
user to the presence of uninsulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a risk of
electrical shock to persons.
WARNING:
To reduce the risk of fire or electrical shock, do not expose this
apparatus to rain or moisture.
WARNING:
No naked flame sources – such as candles – should be placed on the product.
WARNING:
Do not place batteries in mouth or ingest. Chemical burn hazard. Keep new and
used batteries out of reach of children and pets. If swallowed, it can cause
severe internal burns in just 2 hours and can lead to death. If you think
batteries might have been swallowed or placed inside any part of the body,
seek immediate medical attention.
WARNING:
If battery compartment does not close securely, stop using the product and
keep it away from children and pets.
WARNING:
Do not handle leaking or damaged batteries.
WARNING:
Risk of leakage. Only use the specified type of batteries. Never mix new and
used batteries. Observe correct polarity. Remove batteries from products that
are not in use for extended periods of time. Store batteries in a dry place.
WARNING:
Batteries (battery pack or batteries installed) shall not be exposed to
excessive heat such as sunshine, fire or the like.
WARNING:
Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type.
WARNING:
Do not recharge non-rechargeable batteries.
WARNING:
Avoid exposure to extreme heat or cold.Please dispose of any used batteries
properly, following any local regulations. Do not incinerate.
WARNING:
Do Not Open! Risk of Electri-cal Shock. Voltages in this equipment are
hazardous to life. No user-serviceable parts inside. Refer all servicing to
qualified service personnel. Place the equipment near a main power supply
outlet and make sure that you can easily access the power breaker switch.
WARNING:
This product is intended to be operated ONLY from the AC Voltages listed on
the back panel or included power supply of the product. Operation from other
voltages other than those indicated may cause irreversible damage to the
product and void the products warranty. The use of AC Plug Adapters is
cautioned because it can allow the product to be plugged into voltages in
which the product was not designed to operate. If the product is equipped with
a detachable power cord, use only the type provided with your product or by
your local distributor and/or retailer. If you are unsure of the correct
operational voltage, please contact your local distributor and/or retailer.
EU COMPLIANCE INFORMATION
Eligible to bear the CE mark; Conforms to Eu-ropean Union Low Voltage
Directive 2006/95/EC; European Union EMC Directive 2004/108/EC; European Union
Restriction of Hazardous Substances Recast (RoHS2) Directive 2011/65/EC;
European Union WEEE Directive 2002/96/EC; European Union Eco-Design Directive
2009/125/EC; European Union Registration, Evaluation, Authorization and
Restriction of Chemicals (REACH) Directive 2006/121/EC; European Union Radio
and Telecommunications Terminal Equipment (R&TTE) Directive 1999/5/EC. This
product contains batteries that are covered under the 2006/66/EC European
Directive, which cannot be disposed of with normal household waste. Please
follow local regulations. You may obtain a free copy of the Declara-tion of
Conformity by contacting your dealer, distributor, or Klipsch Group, Inc.’s
worldwide headquarters. Contact information can be found here:
http://www.klipsch.com/Contact-Us
Note:
This mark applies only to countries within the European Union (EU) and Norway.
FCC AND CANADA EMC COMPLIANCE INFORMATION
This device complies with Industry Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions This device may not cause
interference; and This device must accept any interference, including
interference that may cause undesired operation of the device.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equip-ment and receiver.
- Connect the equipment into an outlet on a cir-cuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Approved under the verification provision of FCC Part 15 as a Class B Digital Device. Caution: Changes or modifications not express-ly approved by the manufacturer could void the user’s authority to operate this device.Caution: To comply with the limits of the Class B digital device, pursuant to Part 15 of the FCC Rules, this device is to comply with Class B limits. All peripherals must be shielded and grounded. Operation with non-certified peripherals or non-shielded cables my result in interference to radio or reception. This Class B digital apparatus complies with Ca-nadian ICES-003. CAN ICES-3 (B)/NMB-3(B) Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
WIRELESS TRANSMITTER COMPLIANCE INFORMATION
The term “IC:” before the radio certification number only signifies that
Industry Canada technical specifications were met. This device complies with
part 15 of the FCC Rules and the applicable Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions:this device
may not cause harmful interference, and this device must accept any interfer-
ence, including interference that may cause undesired operation of the
device.This equipment complies with FCC and IC ra-diation exposure limits set
forth for an uncon-trolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator and your body. This
transmitter must not be co-located or op-erating in conjunction with any other
antenna or transmitter.
POWERED SPEAKERS/MUSIC SYSTEMS WARRANTY OPT-1ENGLISH – WARRANTY – U.S.
Klipsch Group, Inc, (KGI) warrants to the original retail purchaser that this
product is to be free from defective materials and workmanship for a period of
two (2) years from the date of purchase, if it is properly used and
maintained. If this product proves defective in either material or
workmanship, KGI, at its option, will (a) repair the product, or (b) replace
the product, at no charge for parts or labor. If the product model is no
longer available and cannot be repaired effectively or replaced with an
identical model, KGI at its sole option may replace the unit with a current
model of equal or greater value. In some cases, modification to the mounting
surface may be required where a new model is substituted. KGI assumes no
responsibility or liability for such modification. To obtain a repair or
replacement under the terms of this warranty, please return to dealer first,
if possible, and the dealer will direct you accordingly for repairs or
replacement. You will be required to submit a copy of the original receipt.
Return shipping for exchanges/repairs is the sole responsibility of the
original retail purchaser.
Limitations:
- This limited warranty does not cover failure of the product resulting from improper installation, misuse, abuse, accident, neglect, mishandling, or wear from ordinary use or environmental deterioration.
- This limited warranty does not cover cosmetic damage, including paint damage, or consequential damage to other components or premises which may result for any reason from the failure of the product.
- This limited warranty is null and void for products not used in accordance with KGI’s instructions.
- This limited warranty is null and void for products with altered or missing serial numbers and for products not purchased from an authorized dealer.
- This limited warranty terminates if you sell or otherwise transfer this product to another party.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE, JURISDICTION TO JURISDICTION OR COUNTRY TO COUNTRY. KGI’S RESPONSIBILITY FOR MALFUNCTIONS AND DEFECTS IN HARDWARE IS LIMITED TO REPLACEMENT OR REPAIR AS SET FORTH IN THIS WARRANTY STATEMENT. ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN TIME TO THE TERM OF THIS WARRANTY. SOME STATES, JURISDICTIONS OR COUNTRIES DO NOT ALLOW THE EXCLUSION OF CERTAIN IMPLIED WARRANTIES OR CONDITIONS, OR LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY OR CONDITION LASTS, SO THIS LIMITATION MAY NOT APPLY TO YOU. KGI DOES NOT ACCEPT LIABILITY FOR SPECIAL, INDIRECT, CONSEQUENTIAL OR INCIDENTAL DAMAGES, INCLUDING WITHOUT LIMITATION, ANY LIABILITY FOR THIRD PARTY CLAIMS AGAINST YOU FOR DAMAGES OR FOR PRODUCTS NOT BEING AVAILABLE FOR USE. THE MAXIMUM LIABILITY FOR WHICH KGI MAY BE RESPONSIBLE WILL BE NO MORE THAN THE AMOUNT YOU PAID FOR THE PRODUCT THAT IS THE SUBJECT OF THE CLAIM. SOME STATES, JURISDICTIONS OR COUNTRIES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
WARRANTY OUTSIDE THE U.S.
The Warranty on this product shall comply with applicable law when sold to a
consumer outside of the United States. To obtain any applicable warranty
service, please contact the dealer from which you purchased this product, or
the distributor that supplied this product.