ETA 1294 Battery toothbrush Instruction Manual
- June 5, 2024
- ETA
Table of Contents
ETA 1294 Battery toothbrush Instruction
Battery toothbrush
eta 1294
useR MANuAl
This device is a mechanical remover of tooth plaque which is often used and
which will help your children improve their oral hygiene. Tooth brush
represents the latest technology contained in a effective and ergonomic device
which is an ideal tool for teeth care.
SAFETY PRECAUTIONS
- Before first use, please read this manual, look at the figures and keep it for further reference.
- Never use the device if it‘s not working properly, has fallen on the ground or has been damaged.
- The toothbrushes may be used by children and persons with decreased physical or mental abilities or lack of experience and knowledge, if they are under supervision or have been instructed on using the appliance in a safe way and understand potential dangers. Cleaning and maintenance carried out by the user may not be done by children without supervision. Children must not play with the appliance.
- Never immerse the propulsion unit in water and other liquids!
- Use the appliance only with accessory (replacement brush heads) intended for this type of device.
- Do not put the brush away on hot heat sources (e.g. stove, radiator, cooker)
- If the device has been stored at lower temperatures, acclimatize it first which will maintain the mechanical compactness of the plastic parts.
- Do not put the brush into any bodily cavities (except the oral cavity).
- Clean the brush after use (see par. IV. MAINTANENCE) and store it at a dry place.
- Use only the same type of batteries and do not combine used batteries with new ones.
- If you are not going to use the appliance for a longer period of time, take out the batteries.
- If the batteries are leaking, take them out immediately, otherwise they may damage the toothbrush
- Dispose of the old batteries appropriately (see paragraph V. ECOLOGY).
- Do not use the appliance for any other use than the one it is intended for and described!
- The manufacturer is not liable for any damage caused by incorrect use of the device (e.g. injury of oral cavity, gums, teeth, damaging the device) and is not liable for the warranties in case of breaching the precautions mentioned above.
Features of the device and accessories (pic. 1)
A – propulsion unit
- A1 – button I (switch)
- A2 – button 0 (switch)
- A3 – battery cover
- A4 – battery cover arrest control
B – brush head
C – stand
- C1 – timer
- C2 – brush head holder
D – cup
INSTRUCTIONS FOR USE
Remove all packaging material and remove the toothbrush with accessories. Rinse the parts that will come in touch with the oral cavity in clean hot water before first use.
Notes
For hygiene reasons we recommend every user using their own brush head.
You may use any quality tooth paste for cleaning your teeth. We do not,
however, recommend using special tooth pastes with whitening effects. In order
to prevent spraying, first put the brush on the teeth and then turn on the
propulsion unit.
If you have undergone any surgical intervention in the mouth cavity, consult
your dentist before using the toothbrush.
During the first few days of using the toothbrush, your gums may bleed
slightly which, however, usually stops by itself after a few days. If the
bleeding lasts longer than two weeks, please consult your dentist.
Inserting batteries
Release the battery cover A3 on the bottom of the propulsion unit A by turning
the control A4 clock-wise into a position and remove the cover. Insert 2 pcs.
of AAA batteries, observing the +/- signs (see symbol). Replace the cover and
arrest it by turning the control into the position .
Use
Slide the brush head B slightly on the propulsion unit A so that its
protrusions fit onto the protrusions of the propulsion unit. Rinse your mouth
thoroughly before cleaning your teeth, put toothpaste on the brush head and
moisten it. Position the brush against the teeth
so that it covers the surface of the teeth as well as the gum line. Turn the
brush on by pressing the I button.
Guide the brush slowly along the teeth and grinders, follow the curve of the
gums and the shape of the individual teeth. Hold the brush always on one spot
for several seconds before you move over to a next tooth. Make sure you have
cleaned the whole surface of the teeth (the inner and outer part of the
occlusion area), as well as the line around the gums (pic. 2). Do not
press on the brush, leave it to do all the work by itself. Acquired and
permanently maintained procedure will prevent you from omitting some parts of
the teeth. Do the cleaning for at least 2 minutes which is the minimal
recommended time
by stomathologists. You may use the timer C1 for this purpose If the plaque is
removed properly, the gums will gain pink colour and will surround the teeth
fast.
Timer (C1)
The timer in the form of hourglass allows to control the length of teeth
cleaning (approx. 2 min.).
MAINTENANCE
Clean the toothbrush regularly after each use! Do not use any rough and
abrasive cleaning agents! Wipe the surface with a soft damp cloth. Rinse the
brush head thoroughly for a few seconds under running water while leaving the
propulsion unit on
(pic. 3). Turn the propulsion unit by pressing the 0 button, take off the
brush head and rinse both the parts in running water separately under running
water (pic. 3) and let dry. To achieve hygiene cleanliness we recommend
immersing the brush head every 2 – 4 in a cleaning agent for dentures.
Replacing the brush head
To achieve the best results while cleaning teeth, it is necessary to replace
the brush head every time its bristles start to bend outward, i.e. after
approx. 3 months. You can buy the replacement head at your distributor.
ENVIRONMENT
If dimensions permit, all pieces have printed symbols of materials used for
the production of packing, components and accessories as well as recycling
symbols. The symbols on the product or documentation means the electric or
electronic parts used in the appliance may not be disposed off together with
communal waste. Hand over the electric or electronic part to a waste
collection yard for free disposal. Proper disposal of the product will help
preserving valuable natural resources and prevent potential negative impacts
on the environment and human health that would otherwise result from improper
waste disposal. For more details, please contact your local authorities or
collection yard. Fines may
be imposed for improper disposal of this type of waste pursuant to national
directives. Remove flat batteries from the appliance and dispose of them off
in a suitable way using special collection centres. Do not incinerate the
batteries!
Specialized service is required for overhaul maintenance or maintenance
requiring disassembly of the internal components of the appliance!
The right for warranty repair expires if the above-mentioned instructions are
not adhered to.
TECHNICAL DATA Weight (kg) about
Regarding EMC, the product conforms to the Council Directive No. 2004/108/EC
as amended.
The manufacturer reserves its right for unimportant deviations from the
standard design without influence of the product function.
DO NOT IMMERSE IN WATER.
TO AVOID DANGER OF SUFFOCATION, KEEP THIS PLASTIC BAG AWAY FROM BABIES AND
CHILDREN. DO NOT USE THIS BAG IN CRIBS, BEDS, CARRIAGES OR PLAYPENS. THIS BAG
IS NOT A TOY.
PRODUCER: ETA a.s., Zelený pruh 95/97, 147 00 Praha 4-Bráník, Czech Republic.
References
- ElektroEko – Odbiór odpadów elektro
- Úvod | ELEKTROWIN, a.s.
- Úvod - Envidom
- ETA - tady je doma
- ETA - tu je doma
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>