eta 0336 ProfiCare Hair Straightener Instructions

June 5, 2024
ETA

eta 0336 ProfiCare Hair Straightener

INSTRUCTIONS FOR USE

Dear customer, thank you for buying our product. Before putting the appliance into operation, read carefully these instructions for use and store this manual properly together with the certificate of warranty, a cash voucher and possibly with the package and the internal contents of the package.

SAFETY WARNING

  • Before the first use, read the instructions for use carefully, look at the picture and store the instructions for use for the future. Consider the instructions for use as a part of the appliance and pass them on to any other user of the appliance.

  • Never use the appliance if its power cord or plug is damaged, if it does not work properly, if it fell down and was damaged or if it fell to water. In this case take the appliance to a special service to check its safety and proper function.

  • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

  • The hair straightener must not be immersed into water or other liquids and it must not be used close to bathtubs, showers, wash basins or other water containers, including a swimming pool. If the straightener still falls into water, do not take it out! First of all unplug the power cord from the socket
    and only then take out the hair straightener. In this case take
    the appliance to a special service to check its safety and proper function.

  • If the hair straightener is used in a bathroom, it has to be disconnected from the electric power by unplugging the power cord from the socket because there is a risk close to water even if the hair straightener is off.

  • For additional protection we recommend installation of current protection (RCD) with the nominal release current not exceeding 30 mA. Ask a control technician or an electrician for advice.

  • If the power cord of the appliance is corrupted, it has to be replaced by the producer, its service technician or a similarly qualified person so as to prevent dangerous situations.

  • Always unplug the appliance from power supply if you leave it unattended and before assembly, disassembly or cleaning.

  • Before replacing accessories or accessible parts, before assembly and disassembly, before cleaning or maintenance, turn off the appliance and disconnect it from the mains by pulling the power cord from the power socket!

  • Check whether the data on the type label correspond with the voltage in your socket. The power cord plug has to be connected to the properly connected and grounded socket according.

  • The appliance is intended for use in households only and for similar use! It is not designed for use in hair salons or for other commercial use!

  • Do not insert to or take the plug out of a socket with wet hands and do not pull the power cord!

  • Do not let the appliance in operation without supervision!

  • Do not put the hair straightener on hot heat sources (e.g. oven, stove, radiator).

  • No part of the appliance can get in contact with places sensitive to heat (e.g. eyes, ears, neck).

  • Take care when handling the appliance, try to prevent injury (e.g. burns). Heating plates are hot!

  • Any modification of the appliance surface (e.g. by means of self-adhesive wall-paper, foil etc.) is prohibited!

  • When the appliance is switched on for the first time, short and slight smoke can come out that does not mean any defect and it is not a reason for claiming a defect of the appliance.

  • Do not put the appliance into bodily holes.

  • If the hair straightener is stored at lower temperatures, first of all let its temperature adapt to the environment and thus you will maintain firmness of the plastic parts.

  • The hair straightener must not be used for styling wigs, hairpieces or artificial hair.

  • Hair straightener can be used for styling natural, coloured or bleached hair. But do not use it for styling hair that is treated with chemical substances (e.g. hairspray, styling agent, etc.), the temperature effect could be reduced due to sticking of chemical substances on the plates.

  • Also, do not put the hair straightener on soft and easily flammable surfaces (e.g. bed, towels, sheets, carpets); they could be damaged by hot parts of the appliance.

  • When handling the hair straightener, protect the power cord from contact with the hot surface of the plates or other sources of heat.

  • Switch off the hair straighteners right after its use, unplug it from power supply and let
    it cool down. Then put it on a safe dry place, out of reach of children.

  • Check the condition of the power cord of the appliance regularly.

  • Do not wind the power cord around the appliance; this will extend life of the power cord.

  • The power cord must not be damaged with sharp or hot objects, open fire, it must not be sunk into water or bent over sharp edges.

  • If you need to use an extension cord, it has to be uncorrupted and it has to comply with the valid standards.

  • Never use the appliance for any other purpose than for that described in these instructions for use!

  • The manufacturer is not responsible for damage caused by improper handling of the appliance (e.g. fire, burning, hair damage, etc.) and its guarantee does not cover the appliance in the case of failure to comply with the safety warnings above.

DESCRIPTION OF THE APPLIANCE

A – hair straightener

  • A1 – ON/OFF button
  • A2 – temperature buttons
  • A3 – display
  • A4 – ceramic heating plates
  • A5 – grooves for easy hair curling
  • A6 – turning joint of power cord
  • A7 – power cord
  • A8 – hanging loop
  • A9 – lock sliding control

B – case

INSTRUCTIONS FOR USE

Remove all the packing material and take out the hair straightener. Remove all possible adhesive films, stickers or paper from the appliance. Put the hair straightener on suitable even surface (see par. I. SAFETY SHEET). Plug power cord connector A7 to an electric socket. Press and hold the A1 button, which will turn on the iron. Switch on the hair straightener by pushing and releasing button A1. The preset temperature (100 °C) will appear on display A3 and the plates will start to heat up to the temperature.
If you wish to change the temperature, set the required temperature by buttons A2 (in the range of 100 – 210 °C) according to the type of hair (increase the temperature by pressing + and reduce it by pressing – in steps of 1 °C). Wait for a while until plates A4 are heated to the set temperature. Then the temperature will be kept automatically.
Switch off the appliance after use by pressing and holding button A1, then remove power supply fork A7 from the electric socket and let the appliance cool down before putting it to case B.

Notes

  • Change of the temperature (increasing/reduction) is continuously shown on the display.
  • As soon as the set temperature is reached (the value on the display does not change), you can start styling the hair.

Fluctuation of values on the display is absolutely normal and it is not the reason for claiming defect of the appliance.

Temperature and type of hair

  • Low temperature (100 – 140 °C) – for fine, bleached or damaged hair,
  • Medium temperature (140 – 190 °C) – for normal and wavy hair,
  • High temperature (190 – 210 °C) – for strong, rough and curly hair.

Hair straightening
Use the hair straightener for washed and dried or slightly damp hair, never for wet hair. Before using the hair straightener, comb the hair so that it is not disheveled. Start with styling the lower hair first. When styling hair, do not put locks of hair that are too thick between the plates. Divide a lock in about 5 cm of its width and put it into an open hair straightener. Then close the hair straightener by pushing and move it slowly on the lock from roots towards hair tips. You can curl the tips thanks to round edges of the plates upwards or downwards. Repeat the process till you have created the required hairstyle. Let the hair cool down before the final styling.
Lock
The lock is used for safe and effective storing of the straightener in the closed position. Locking – close the straightener by pushing and slide control A9 to the position . Unlocking – push the closed straightener and slide control A9 to the position .

MAINTENANCE

Turn off the appliance before any maintenance, disconnect it from power supply by unplugging the power cord from the electric socket and let it cool down! Do not use rough and aggressive detergents! Treat the surface with a wet and soft cloth. Put the cooled straightener to a safe and dry place, out of reach of children and incapacitated persons.

ENVIRONMENTAL PROTECTION

If the dimensions allow, there are labels of materials used for production of packing, components and accessories as well as their recycling on all parts. The symbols specified on the product or in the accompanying documentation mean that the used electrical or electronic products must not be disposed of together with municipal waste. For proper disposal, hand them over at special collection places where they will be accepted free of charge. Suitable disposal of the product can help to maintain valuable natural resources and to prevent possible negative impacts on the environment and human health, which could be the possible consequences of improper waste disposal. Ask for more details at the local authority or at the local waste collection site. Fines can be imposed for improper disposal of this type of waste in agreement with the national regulations. If the appliance is to be put out of operation for good, after disconnecting it from power supply we recommend cutting off the power cord and thus it will not be possible to use the appliance again.
More extensive maintenance or maintenance requiring intervention in the inner parts of the appliance must be carried out by a professional service! Failure to comply with the instructions of the manufacturer will lead to expiration of the right to guarantee repair!

TECHNICAL DATA

  • Voltage (V): specified on the type label
  • Input (W): specified on the type label
  • Weight about (kg): 0,3
  • Protection class of the appliance: II.
  • Size of the product (mm): 347 x 70 x 52

The product has received ES declaration of conformity according to Act as amended. The product matches the requirements of the below statutory order as amended.

  • Committee Regulation No. 2006/95/ES as amended, setting the technical requirements of the electrical appliance as low.
  • Committee Regulation No. 2004/108/ES as amended, setting the technical requirements of products in terms of their electromagnetic compatibility

The manufacturer reserves the right to make insignificant changes to the standard design that do not affect the function.
DO NOT IMMERSE IN WATER OR OTHER LIQUID.
TO AVOID DANGER OF SUFFOCATION, KEEP THIS PLASTIC BAG AWAY FROM BABIES AND CHILDREN. DO NOT USE THIS BAG IN CRIBS, BEDS, CARRIAGES OR PLAYPENS. THIS BAG IS NOT A TOY.

Notice: Do not use the appliance close to bath tubs, showers, bash basins or other water containers.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

ETA User Manuals

Related Manuals