concept SM 3000 Smoothie Blender User Manual

: June 5, 2024
: concept

Table of Contents

concept SM 3000 Smoothie Blender
ACKNOWLEDGMENT
IMPORTANT SAFETY INSTRUCTIONS
PRODUCT DESCRIPTION
Intelligent switch
OPERATING INSTRUCTIONS
CLEANING AND MAINTENANCE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

concept SM 3000 Smoothie Blender

ACKNOWLEDGMENT

Thank you for purchasing a Concept product. We hope you will be satisfied with our product throughout its service life. Please study the entire Operating Manual carefully before you start using the product. Keep the manual in a safe place for future reference. Make sure other people using the product are familiar with these instructions.

Technical parameters

Double or reinforced insulation

IMPORTANT SAFETY INSTRUCTIONS

Use the unit only as described in this operating manual.
Remove all the covering and marketing materials from the unit before the first use.
Make sure the mains voltage matches the value marked on the rating plate.
Close supervision is necessary when the unit is on or plugged into the socket.
Put the appliance on a flat, steady surface; do not put it on other appliances.
Do not place the appliance close to flammable substances, fire, heating bodies or a hot oven.
Do not cover the appliance. There is a risk of overheating.
Do not put anything on the unit during operation.
Never carry the unit during operation.
Keep the unit clean; prevent debris or other foreign bodies from entering the openings of the unit body . Contaminants may short out the unit, causing damage or fire.
Never pull the cord to disconnect the plug from the socket; hold the plug instead.
Do not allow children or unskilled people to handle the unit. Use the unit out of the reach of these individuals.
The appliance is not intended for use by people with reduced physical, sensory or mental capabilities or lack of knowledge, unless under the supervision of an acquainted person responsible for their safety.
Pay the utmost attention when using the unit close to children.
Do not use the appliance as a toy.
Make sure the power cord does not hang over the working area, to prevent children from reaching it.
The appliance is intended for interior use only; do not expose it to moisture. Otherwise, a risk of electrical shock may occur.
Use manufacturer-recommended accessories only.
Never use the appliance if the supply cord or plug is damaged. Immediately refer to an authorised service centre for repair.
Never pull the supply cord or use it to carry the unit.
Keep the appliance away from any other heat sources such as radiators, ovens etc. Do not expose the unit to direct sunlight or moisture.
Never operate the appliance with wet hands.
Turn off the product and disconnect the plug from the mains outlet before installing accessories, performing maintenance, or in the case of any failure.
Do not touch the moving parts during operation of the unit. Wait until it stops completely.
The appliance is intended for domestic use only, not for commercial use.
Do not immerse the power cord, plug, or appliance in water or any other liquid.
Check the appliance and power cord for damage regularly. Never switch on a damaged appliance.
Prevent loose hair and garments from hanging close to the openings and moving parts of the appliance.
Before plugging the unit in or unplugging it from the wall outlet, make sure the switch is OFF.
Always take extra care when handling the blades and slicers. They are very sharp and could cause an injury.
Turn the unit off, disconnect the power cord from the wall outlet, and allow the unit to cool before cleaning.
The unit contains sharp parts. Extra care should be taken while cleaning the unit.
Do not let the power cord hang loosely over the edge of the work area. Make sure the power cord does not touch hot surfaces.
Do not let the unit hang loosely on the power cord.
Do not use the unit without correctly mounted accessories.
Do not let the appliance run when empty.
Do not repair the appliance yourself. Refer to an authorised service centre instead.
This appliance may be used by children 8 years of age and older and by persons with physical or mental impairments or by inexperienced persons if they are properly supervised or have been informed about how to use of the product in a safe manner and understand the potential dangers. Children must not play with the appliance. This appliance may be cleaned by children 8 years of age and older if they are properly supervised. Keep this appliance and the power cord out of reach of children younger than 8 years of age

Failure to follow the manufacturer‘s instructions may lead to refusal of warranty repair.

PRODUCT DESCRIPTION

Small cup
Seal belt of lid
Jar
Blades
Jar base
Jar lid with handle
Soft touch Jar handle
Motor Driver Gear
Blender Motor Base
Shock-proof Suit
Safe switch bar
Stepless Speed control knob
Mode control button
“P” Mode
“Crusher” Mode
“Smooth blending” Mode

Intelligent switch

This blender owns “Mode”, “0/Off”, “Stepless Speed” 3 type SWITCH controls. You could choose one of them for your drink / food processing.

“0/Off” switch controls
This speed control is to stop the blender or reset the blender speed. Important: Machine only could be work when the switch knob is started from “O/off” position.

“Mode” switch controls
Turn to this switch control position, 3 pcs Mode control buttons will be flashing. Press “Ice Crusher” Mode or “Smooth blending” Mode, the chosen button will be under long light and other buttons with no light. The machine will working as setting. Press the same button again, this button function will be canceled and all 3 buttons will be back to flashing. “P” Mode will stop at once when your finger leave from button

“P” Mode – Pulse function
Need to press it during blending, once your finger leave from button, this function will stop.

“Crusher” Mode – Crusher function
Blender under this mode will automatically work: few seconds on and stop, and repeat processing for several time. Ice crushed under this mode will not spray and stick onto the glass jar wall

“Smooth blending” Mode – Crusher function
Blender under this mode will automatically work: speed moves faster and faster till to max speed, working 2 minutes will stop by itself.

“Stepless Speed”
If you want the blender moving slowly, turn the adjustment from “Min”. If you need the blender moving fast, turn the adjustment till to “Max”.

OPERATING INSTRUCTIONS

CAUTION
Prior to using a new unit, wipe the surface with a wet cloth and wash the removable accessories in warm water due to hygienic reasons. The unit has a built-in safety catch. The motor can be switched on only if the accessories are properly mounted. Do not bypass the safety mechanism! Never leave the appliance unattended while it is running or connected to the mains. Some parts may keep moving for a while immediately after the motor has been switched off and the power cord disconnected from the socket. Wait until the accessories stop completely and only then open the lid.

Using your blender

Place the Jar onto Blender Motor Base. Before operation, recheck the Jar base is fixed well on the blender Motor Base or not. If not, adjust a little bit direction of driving shaft of Blade under Jar base for a easy insert into Motor Driver Gear of Blender Motor Base.
Put the ingredient into Jar and then cover the lid back
Plug into the power source
Settle “Mode” or “Stepless Speed” SWITCH controls to start the processing.
Note : Blender only works when the switch knob is started from “O/off” position. If blender could not work, please turn the knob back to “O/off” position.
Ingredient could be added into Jar through Small cup in the lid
Take away the Jar from Blender Motor Base only when the motor is stop.

WARNING

Hot food mixes at the lowest speed, if necessary, add speed. Do not use smoothie, there is a risk of splashing hot liquid from the container and scalding.

CLEANING AND MAINTENANCE

Before cleaning remove the power cord from the socket.
Never immerse the housing with motor in water!
Do not use any sharp or abrasive detergents.
Only a damp rinsing cloth should be used to clean the outside of the housing.
Components that have come into contact with food can be cleaned in soapy water.
Allow the parts to dry thoroughly before reassembling the device.

SERVICING
Any extensive maintenance or repair that requires access to the inner parts of the product must be performed by an expert service centre.

ENVIRONMENTAL PROTECTION

Packaging materials and obsolete appliances should be recycled.
The transport box may be disposed of as sorted waste.
Polyethylene bags shall be handed over for recycling.

Appliance recycling at the end of its service life:
A symbol on the product or its packaging indicates that this product should not go into household waste. It must be taken to the collection point of an electric and electronic equipment recycling facility. By making sure this product is disposed of properly, you will help prevent the negative effects on the environment and human health that would otherwise result from inappropriate disposal of this product. You can learn more about recycling this product from your local authorities, a household waste disposal service or in the shop where you bought this product.