Pulsar X2 Wireless Gaming Mouse Instruction Manual

June 5, 2024
Pulsar

Wireless Gaming Mouse
Instruction Manual

Model No: PX201

Function layout

Pulsar X2 Wireless Gaming Mouse - Fig

1. Left click
2. Right click
3. Middle click
4. Forward
5. Backward
6. Scroll up| 7. Scroll down
8. Power off
9. Power O n
10. DPI button
11. Indicator
12. Type- c connector
---|---

Instruction

Mouse instruction:

  1. Take out the wireless USB Nano receiver from the package.
  2. P lug the receiver into your computer USB port or use an extension adaptor.
  3. Turn on the mouse power by switching the power switch on the bottom of the mouse
  4. Waiting for computer installation finished.

DPI setting and indication:

  1. DPI level: 40 0 – 8 0 0 – 16 0 0 – 32 0 0 , total 4 levels DPI .
  2. Press DPI button on bottom to change DPI .
  3. The indicator color will indicate the DPI level as below: 4 00 DPI: cyan color blink. 80 0 DPI: blue color. 16 0 0 DPI: purple color.3 2 0 0 DPI: white color.

Note:

  1. DPI can be set  by software , MAX DPI is 2 6 0 0 0 dpi
  1. DPI led effects can be set by software and can turn off the DPI led to save power

Polling rate: 1 2 5 – 2 5 0 – 5 0 0 – 1 0 0 0 Hz can be set by software, default polling rate is 1 0 0 0 Hz
Wired and wireless function:

  1. W ired and wireless mode switch automatically, when you plug the receiver into the computer without a cable connection, it will work as wireless mode.
  2. If you connect the cable from the computer to the mouse, it will switch to wired mode automatically and work as wired mode.

Low power and charging indication

  1. Low power indication: when mouse battery power is low, the indicator led will blink Red color, then you need to charge the mouse battery by connection type- c cable.
  2. During charging the yellow color led in the wheel will flash, after the battery charges full, the indicator will back to its previous color mode.

Pairing

  1. If your mouse loses connection, you need to use the pairing tool to pair the mouse and receiver again

Note: If you need to customize the function, pls download the software from a website

CAUTION

  1. Keep the battery dry.
  2. Avoid locating the battery terminals near metallic objects.
  3. Do not short- circuits and avoid metallic or water coming into a mouse to cause battery short
  4. Use computer USB and specified cable to charge the mouse.

Main Specification

Size: PX201:120 .5×63 .5x38mm
Weight: P X 2 0 1 : 5 6 g
Switch Kailh GM 8 .0
Sensor PAW3395
Max DPI 26000
Default DPI: 400-800- 1600-3200DPI
IPS 6 5 0 ips
Accelerate icon 5 0 g( Max)
Polling rate 125-250-500- 100 0Hz
Interface USB 2 .0
Battery type L i- ion Polymer Battery
Battery capacity 300 mA h
Rating 50- 300ma

FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals