Kinglucky K12-Beige-1 Karaoke Machine for Kids Instruction Manual
- June 16, 2024
- KingLucky
Table of Contents
Kinglucky K12-Beige-1 Karaoke Machine for Kids
Product Information
Specifications
- Product Name : Handheld Audio Microphone
- Key Features : Sound quality, high sensitivity
- Battery : Built-in
Function Introduction
- Short press once to decrease the volume and long press for previous song.
- Manually switch playback mode, Bluetooth/TF card/U disk, etc.
- Short press the volume once, and long press for one song.
- Short press to toggle LED lighting effect, long press for 2 seconds to turn off LED lighting effect.
- Long press for three seconds to power on/off, short press for play/pause, double-click to turn on/off couplets.
- Short press to turn on/off the original sound.
- Long press once to mute the microphone.
- Short press Microphone Volume Plus, double-click Reverb Plus.
- Short press the microphone volume down, double-click the reverb to decrease.
- Short press to cancel the original sound on/off, long press to switch the magic sound.
- Microphone indicator: blue light flashing in unconnected state, blue light is always on when connected successfully, red light is on when charging, and red light is off after full charge.
Product Usage Instructions
Charging Connection Diagram:
Handling of Common Issues
- Computer USB Charging : If the indicator does not light up after turning on, please check whether the speaker power is sufficient, or connect the speaker to a 5V/1A power supply for charging. The charging time is about 3-4 hours.
- On-board USB Charging : If the indicator does not light up after turning on, please check whether the speaker power is sufficient, or connect the speaker to a 5V/1A power supply for charging. The charging time is about 3-4 hours.
Tips
- This product is sold without a power adapter. If the power adapter is used for power supply, it should be purchased separately. Use a power adapter that has obtained CCC certification and meets the requirements of the standard.
- Batteries must not be exposed to conditions such as sunlight, fire, or similar overheating. They should only be replaced with the same type of battery if there is a risk of explosion.
FAQ
-
If there is no sound from the microphone, what could be the issue?
If there is no sound from the microphone, it may be due to the power not being turned on, incorrect mode selection, or microphone volume not adjusted properly. Please ensure that the microphone is powered on, select the correct mode, and adjust the microphone volume. -
If there is noise in the microphone, what could be the cause?
If there is noise in the microphone, it may be due to ambient noise, signal interference, or the microphone being too close to the speaker. Please try re- adjusting the direction of the microphone and ensuring that there are no sources of interference nearby. -
If Bluetooth playback is interrupted, what could be the reason?
If Bluetooth playback is interrupted, it may be because the Bluetooth distance is too far or there is an obstacle between the mobile phone and the amplifier, which affects the transmission of the signal. Please try moving closer to the connected mobile phone and removing any obstacles that may be blocking the signal. -
If Bluetooth cannot be connected, what could be the issue?
If Bluetooth cannot be connected, it may be because the distance between the microphone and the mobile phone is too far, there are obstacles in the way, or another mobile phone is already connected. Please try moving closer to the mobile phone, removing any obstacles, and disconnecting any other connected devices.
Function introduction
- Short press once to decrease the volume and long press the previous song.
- Manually switch playback mode, Bluetooth/TF card /U disk, etc.
- Short press the volume once, and long press one song.
- Short press toggle LED lighting effect, long press for 2 seconds to turn off LED lighting effect.
- Long press for three seconds to power on/off, short press play/pause, double-click to turn on/off couplets.
- Short press to turn on/off the original sound.
- on and on, and short press once to mute the micro phone .on and on, and short press once to mute the microphone.
- Short press Microphone Volume Plus, double-click Reverb Plus.
- Short press the microphone volume down, double-click the reverb to decrease.
- Short press to cancel the original sound on/off, long press to switch the magic sound.
- Microphone indicator, blue light flashing in unconnected state, blue light is always on when connected successfully, red light is on when charging, and red light is off after full charge.
- Microphone Type-C 5V charging port.
- Headphone jack.
- TF card slot, insert files with MP3 audio class automatically switch to TF mode.
- Audio Type-C 5V charging interface.
- USB socket, insert files with MP3 audio class automatically switch to USB mode.
- Audio indicator, blue light flashing in unconnected state, blue light is always on when connected successfully, red light is on when charging, and red light is off after full charge.
Specifications
- Output power : 5W
- Input signal : 42DB
- Battery : high-performance large-capacity lithium battery
- Charging voltage : DC5V
- Frequency range : 90Hz-18KHz
- Power supply mode : DC charging and built-in battery
Key features
- It adopts a high-reduction electroacoustic system
- 3.7V high performance battery
- Strong sound penetration and wide coverage
- Super MP3 audio decoding technology
- Full digital audio processing, clear sound quality, high sensitivity
Charging connection diagram
Tips
This product is sold without a power adapter, if the power adapter is used
for power supply, it should be purchased to use a power adapter that has
obtained CCC certification and meets the requirements of the standard.
Batteries must not be exposed to conditions such as sunlight, fire or similar
overheating, and should only be replaced with the same type of battery if
there is a risk of explosion if the battery is not replaced properly.
Handling of common issues
- If the indicator does not light up after turning on, please check whether the speaker power is sufficient, or connect the speaker to the 5V/1A power supply for charging, the charging time is about 3-4 hours.
- There is no sound from the microphone, it may be that the power is not turned on, the mode is incorrect, or the volume is not adjusted Please adjust the microphone volume.
- If the speaker does not have reverb, it may be that the reverb switch is off, please turn on the reverb switch.
- If there is noise in the microphone, it may be due to am-bient noise, signal interference, microphone too close to the speaker, etc., please re-adjust the direction of the microphone.
- If Bluetooth playback is interrupted, it may be because the Bluetooth distance is too far, or there is an obstacle between the mobile phone and the amplifier,which affects the transmission of the signal, please approach the connected mobile phone and avoid the obstacle.
- If Bluetooth cannot be connected, it may be because the distance is too far, there are obstacles, or it is connected by other mobile phones, please approach the phone to avoid obstacles and disconnect the phone.
- If it cannot be charged, check whether the charger is normal, and whether the red indicator light of the charging port is lit when the speaker is charging.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>