Livoo TEA306 Portable USB Air Compressor Air Pump User Manual
- June 9, 2024
- Livoo
Table of Contents
User Manual
Référence : TEA306
Portable USB air compressor
Version : v.1.0
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
Thank you for choosing a Livoo product!
Your blender, your barbecue, and your headphones are not just objects, they
are extensions of yourself, allowing you to get closer to your friends and
family, to bring them together, to laugh and to share experiences. Livoo’s aim
is to help you live your life to the fullest, whatever wishes you have
throughout the year. Winter raclette, summer barbecue. Or the other way
around. It’s up to you. Take advantage of this freedom for feel good moments
every day.
That’s why we’re constantly innovating and creating clever products full of
zest, but most of all, accessible.
Find our entire collection on our website www.livoo.en.
Livoo, your daily companion till social networks
Safety Instructions
Please, take time to read well the instruction sheet before the first use and keep them for a future use. A misuse of the appliance can damage it or hurt the user. Assure that you use the appliance for the use for which it is designed. We refuse any responsibilities as for the damages by an incorrect use or a bad manipulation.
- Children must not use the appliance.
- Use the compressor only at room temperature and out of the sun.
- Do not exposure your tire inflator to rain and never put it in contact with water or any other liquid..
- Turn off your compressor and let it cool down for 30 minutes after a constant use of 10 minutes.
- Switch off the appliance after use.
- WARNING: Use only the supplied cable for charging.
- If you use an adapter (not supplied), use only an adapter with a 5V power supply.
WARNING
1- This product will have a slight fever in normal operation.
2- To extend the service life of the air pump, continuous inflating of more
than 10 minutes is not recommended.
Technical Specifications
| Model | TEA306 |
|---|---|
| Material | ABS |
| Dimension | 89 x 47,5 x 137 mm |
| Power | 50 W |
| Voltage | 7,4 V |
| Battery capacity | 2000 mAh x 2 |
Drawing of the device
Figure 1
| 1 | Air hose |
|---|---|
| 2 | Heat resistant hose |
| 3 | Power switch |
| 4 | Pressure display |
| 5 | Operation buttons |
| 6 | LED light |
| 7 | USB charging port |
Figure 2
| 1 | USB charging cord |
|---|---|
| 2 | Multifunction nozzles |
Use of the device
Figure 3
Connect air hose to the Inflator. Screw the air hose to the tire valve Turn on
the power switch
Figure 4
Press “M” shortly to wake up the screen or start inflating
Press “ ” button to choose between the 4 different modes pre-stored in the device.
Long press “ ” button 3 seconds to change the pressure unit(bar, kPa, Kg/cm², PSI).
For car tire For motorcycle For bike For balls
Figure 5
You can press “+” or”-” to increase or decrease target pressure before
inflating. Short press “M” to start inflating
When the real pressure reaches to the target pressure, it will stop
automatically. You can also stop inflating any time by pressing “M” Button.
Figure 6
| 1 | Pressure display |
|---|---|
| 2 | Pressure unit |
| 3 | Increase preset pressure value |
| 4 | LED light switch |
| 5 | Model type |
| 6 | Battery display |
| 7 | Decrease preset pressure value |
| 8 | Change mode/change pressure unit |
| 9 | Wake up the digital display screen/Start inflating |
Battery display (Figure 7)
First battery mark display: 100% > power > 70%.
Second battery mark display: 70% > power > 40%.
Third battery mark display: 40 > power > 10%.
Third battery mark display flashing: battery
power less than 10%, need to recharge.
To charge your device, use the supplied USB/Type-C cable. Connect the Type-C
end of the cable to the Type-C port on the device and the USB end to a port
capable of charging your device. Be sure to observe the charging voltage (5
V).
Correct disposal of the unit (Electrical and Electronic Equipment).
(Applicable in the European Union and the rest of Europe that have adopted
separate collection systems countries). The European Directive 2012/19/EU on
Waste Electrical and Electronic Equipment (WEEE), requires that old household
electrical appliances must not be disposed of in the normal household waste
stream. Old appliances must be collected separately in order to optimize the
recovery and recycling of the materials they contain and reduce the impact on
human health and the environment. The symbol of the crossed out dustbin is
marked on all products to remind the obligations of separate collection.
Consumers should contact their local authority or retailer for information
concerning the correct disposal of their product.
- Non contractual illustration
- Product information is subject to change without prior notice.
LIVOO
BP 61071
67452 Mundolsheim – FRANCE
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>