boAt Airdopes Genesis TWS Earbuds User Guide

boAt Airdopes Genesis TWS Earbuds

AIRDOPES GENESIS
Get ready to immerse yourself in musical bliss with your very own pair of boAt Airdopes Genesis. Please consider this manual as your guiding map towards the shores of musical bliss. Knowledge of Bluetooth and device connectivity is essential for steering this boat and therefore we strongly recommend thorough reading of this manual; also, you may refer to the same at times when you face any sort of difficulty in future.

1. 1x Pair of TWS Earbuds
2. 1x Charging Case
3. 1x Type-C Charging Cable
4. 1x FAQ Card
5. 1x User Manual
6. 1x Warranty Card
7. 1x Catalogue

OVERVIEW

1. Capacitive Touch Control (CTC)
2. Indicator Light
3. Charging Port

POWER ON (FIRST TIME USER)

Step 1: To switch the earbuds on (Smart Power On) simply open the lid of the charging case (when earbuds are inside). Our IP™ (Insta Wake N’ Pair) Technology enables the earbuds to power on automatically, get connected and enter the connection mode
OR Long touch the CTC on both earbuds for 3 seconds to manually power on the earbuds
Step 2: Both the earbuds automatically pair with each other. The earbuds enter the Connection Mode, indicated by slow breathing white LED on the master earbud.

CONNECTION MODE:

Stop 3. Turn on the Blustooth functionality on your phone/media device and scan

Step 4. Search for Airdopes Genesis’ and pair accordingly.
Congratulations! Your earbuds are connected successfully via Bluetooth

Note

• Pairing Mode: It lasts for 5 minutes. If the pairing time is missed then you will need to reconnect the earbuds and follow tho above-mentioned procedure
• Subsequant Usage: Airdopes Genasis remembers previously connected devices, once switched on, the earbuds automatically reconnect to the previously connected devicos

QUICK GLANCE ON FUNCTIONALITIES

SINGLE EARBUD USAGE

Step 1. Please note that both the earbuds can be used in mono mode. Use Smart / Manual Power On for switching on the desired earbud

Step 2. The selected earbud automatically enters the connection mode indicated by slow white LED flashes

Step 3; Turn on Bluetooth on your phone/media device and search for ‘Airdopes Genesis’ to connect

Notes:

• To switch to Stereo mode, simply take out the other earbud from the case. It will automatically power on and pair with the previously selected earbud, hence enabling Stereo usage
• You cannot skip tracks or return to the previous tracks in Mono mode

CHARGING THE EARBUDS/ EARBUD INDICATORS

Step 1: Please insert the earbuds back inside the charging case in correct orientation end close the case lid
Once the earbuds are fully charged, the charging case automatically switches off to save power

LED INDICATORS

CASE LED INDICATION: EARBUDS GETTING CHARGED
This is to indicate that the earbuds are getting charged (when lid gets closed)
White LED turns on for 5 seconds to indicate the earbuds are getting charged

Note
Before using the earbuds for the first time, it is recommended to fully charge the ear-buds. Also, please keep the lid of the charging caso closed while charging

CHARGING THE CASE

Step: To charge the case, plug one end of the provided cable into the case and connect the other and to a computer wall adaptor/ powerbank, etc

BASIC FUNCTIONS

• Voice Assistant: Long touch the CTC on either earbud for 3 seconds to activate defauit voice assistant
  Answer Call: Single tap the CTC on either earbud to answer an incoming call

• Hang Up Call: Double tap the CTC on either earbud

• Reject Call: Double tap the CTC on either earbud

• Play/Pause Music: Put on the earbuds to play a song, whereas remove them from your ears to pause one, The In-Ear Detection feature triggers a seamless play or pause.
  OR

• Single tap on either earbud’s CTC to play or pause music Next Track. When playing music, double tap the right CTC to skip to the next song

• Previous Track: When playing music, double tap the left CTC to return to the previous song

BEAST™ MODE

Triple tap either earbud’s CTC to switch to Low Latency mode also known as the BEAST™ Mode, Made for the Gamers – By Gamors,BEAST™” Mode reduces the latency significantly and improves the overall gaming experience. With BEAST™ mode, the earbuds activate low latency mode especially made for gaming.
To turn off the BEAST™’ mode and return to Standard mode, triple tap the CTC again.

ENX™ TECH
Our ENx” tech algorithm cancels out the background noise so that you can be heard crystal clear via voice calls. One need not activate ENx” as the mic is equipped with the same and activated by default.
Deliver your voice without interruptions anywhere – traffic, railway stations, airports, workspace; literally anywhere!

Note:
Volume can only be controlled via the media device

VOICE ASSISTANT

Step 1: Long touch the CTC on either earbud for 3 seconds to activate the smart voice assistant

Step 2: The respective voice assistant screen pops up and you may place your commands at ease

Tips: You may try out the following commands

• What Is the weather?
• Play a song
• Set a reminder

Noto:
If the volce assistant does not get triggered them the functionality has to be first onabled via your media devico SMART POWER OFF

Step 1: After usage, remove both the earbuds from your ears

Step 2 Place the earbuds back into the charging case in correct orientation and close the case lid

Stop 3. The earbuds will automatically switch off (and enter charging mode)

MANUAL POWER OFF

Step 1: Long touch both the CTs on earbuds for 5 seconds

Stop 2: Once the earbuds get turned off, place them back insido the case and close the lid

FACTORY RESET

Perform the Factory Reset in case you face any difficulty while operating your Airdopes Genesis

NOTE: Before performing reset, clear “Airdopes Genesis” from pairing device history by forgetting device.

Step 1: Place the earbuds inside the case

Step 2. While the earbuds are inside the case, long press the Reset button located outside the case for 10 seconds, until the LED flashes 5 times on the earbuds as well as the case

Step 3: Close the case lid, wait for 5 seconds and then reopen it again.
Congratulations! Your Airdopes Genesis has been Reset, now you may perform a fresh pairing procedure to establish connection.

TROUBLESHOOTING

SPECIFICATIONS

WARNING:
Please follow the instructions to operate
Pleaso don’t use the earbuds in extrome temporatures
Please don’t use the product near water
Please keep the product away from heat sources, as the hoat may damage it

• Don’t jam the ports such as charger port, LED port, otc.
  It is recommended to utilize the product below the maximum volume in order to protect hearing and extend the ear-buds’ servico life

ADVISABLE:
The earbuds start at a 100% volume and it may need to be reduced when the earbuds are switched on at first. This can be done by using the phone/media device

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>