boAt Airdopes Alpha User Guide

boAt Airdopes Alpha

AIRDOPES ALPHA
Get ready to immerse yourself in musical bliss with your very own pair of boAt Airdopes Alpha. Please consider this manual as your guiding map towards the unparalleled shores of auditory realm. Knowledge of Bluetooth and device connectivity is essential for steering this boat and therefore we strongly recommend thorough reading of this manual. Also, you may refer to the same at times when you face any sort of difficulty.

PACKAGE CONTENTS

1.  1x Pair of TWS Earbuds
2.  Ix Charging Case
3.  IN Type-C Charging Cable
4.  Ix User Manual
5. 1x Warranty Card
6.  Ix Catalogue
7. Ix FAQ Card

OVERVIEW

1.  CTC (Capacitive Touch Control) /Power button

POWER ON (FIRST TIME USER):

• Step 1: To switch the earbuds on (Smart Power On) stTnpJy open the lid of the charging case (when earbuds are inside). Courtesy our IWP­(lnsta Wake N’ Pair) technology. the earbuds power on automatically, get connected and enter the connection mode
  OR
  Long touch the CTC (Capacitive Touch Control on both earbuds for ::5 seconds to manually power on the earbuds

• Step 2: After powering on. the earbuds ente.r the Connection Mode, indicated by alternate red and blue LED flashes on primary eatbud and blue LED flashes once every 5 &&eonds on the secondary earbud

CONNECTION MODE:

• Step 3: Turn on the Bluetooth functionality on your phone/media device and scan.
• Step 4: Search for “Airdopes Alpha and pair accordingly.

Congratulations Your earbuds are connected successfully via Bluetooth

Note

•  Pairing Mode: It lasts for 5 minutes. If the pairing time is missed then you will need to reconnect the ear-buds and follow the above mentioned procedure
• Airdopes Alpha remembers previously connected devices; once switched on, the earbuds automatically reconnect to the previously connected devices in working range

SINGLE EARBUD USAGE

• Step 1: Please note that both the earbuds can be used in mono mode. Use Smart / Manual Power On for switching on the de:aired earbud
• Step 2: The Selected earbud automatically enters the connection mode indicated by rapid red S. btue LED flashes.
• Step 3: Turn on Bluetooth on your phone/media device and search for “Airdopes Alpha’ to connect

Notes:

• To .switch to Stereo mode. simply take out the other earbud from the case. It will automatically power on and pair with the previously selected earbud. hence enabling Stereo usage
•  You cannot return to the previous tracks in Mono(single-earbud) mode

QUICK GLANCE ON FUNCTIONALITIES

CTC (Capacitive Touch Control)

CHARGING THE EARBUDS

• Step 1: Please insert the earbuds back inside the charging case in correct orientation and close the lid
• Step 2: In charging status, the red LED Solid turns on when case lid gets opened. LED stays off when the lid stays closed.
• Step 3: Once the earbuds get fully charged, the charging case automatically switches off to save power, and the red LED stays turned of

Note

•  Before using the earbuds for the first time, it is recommended to fully charge the earbuds. Also, please keep the lid of the charging case closed while charging.
•  To indicate low earbud battery, red LED blinks thrice every 30 seconds

CHARGING THE CASE

• Step: To charge the case, plug one end of the provided cable into the case and connect the other end to a computer/ wall adapter/ power bank, etc.

REMAINING CASE BATTERY LED INDICATIONS

CASE LED INDICATION WHEN EARBUDS ARE GETTING CHARGED FROM THE CASE

This is to indicate the earbud getting charged from the case (when case lid gets closed):

•  WHITE LED is Solid ON for 8 seconds while charging
• WHITE LED is OFF when Earbuds are charged folly

BASIC FUNCTIONS

• Voice Assistant Triple tap on left CTC to activate default smart voice assistant
• Answer. Single tap the CTC on either earbud to answer an incoming call
•  Hang Up / Reject Call: Double tap the CTC on either earbud to end / reject call
•  Play/Pause Music: Single tap either earbud’s CTC to play)I or pause music
•  Next Track: When playing music. double tap the right earbuds. CTC to skip to the next song
• Previous Track: When playing music, double tap the left earbud’s CTC to return to the previous song

Note

• Volume can only be controlled via the media device

VOICE ASSISTANT:

• Step 1: Triple tap on left CTC to activate default smart voice assistant
• Step 2: The respective voice  assistant screen pops up and you may place your commands at ease.

Tips: You may try the following commands.

• What is the weather’?
• Play a song Set a reminder

Note
If the voice assistant doesn’t get triggered, then the functionality hes to be first enabled via your media device settings.

ENX™ TECH
Our ENx™” tech algorithm cancels out the background noise so that you can be heard crystal clear via voice calls. One need not activate EN* as the mics are equipped with the same and activated by default Deliver your voice without interruptions anywhere – traffic, railway stations, airports, work space, fiterally anywhere!

SMART POWER OFF

• Step 1: After usage, remove both the earbuds from your ears
• Step 2: Place the earbuds back into the charging case in correct orientation and close the lid

The earbuds automatically switch off (and enter charging mode)

MANUAL POWER OFF

• Step 1: Long touch either CTC for 8 seconds to manually power off the earbuds
• Step 2: Once the earbuds get turned off, place them back inside the case and close the lid

BEAST'” MODE
Triple tap the right CTC to switch to Low Latency mode. also known as the BEAST”‘ Mode. Once switched on, it gets notified via a sound prompt. Triple tap the left CTC once again. to tum it off and return to standard Music Mode. Made for the Gamers – By Gamers, BEAST”” Mode reduces the latency significantly end improves the overall gaming experience.

FACTORY RESET
Perform the factory reset in case you feel any difficulty while operating your Airdopes.
NOTE: Before performing reset, clear “Airdopes Alpha” from pairing device history by forgetting device

• Step 1: Take out the earbuds from the charging case, and long touch the CTC for 5 seconds on both the earbuds.
• Step 2: Place the earbuds inside the Case.
• Step 3: Close the lid, wait for 5 seconds.
• Step 4: Take out the earbuds from the charging case and perform a fresh connection.

Note: To complete the factory reset, all of the above steps should be performed.
Congratulations! Your Airdopes Alpha has been Reset

SPECIFICATIONS

WARNING

• Please follow the instructions to operate
• Please don’t use the earbuds in extreme temperatures
• Please don’t use the product near water
• Please keep the product away from heat sources, as the heat may damage it
•  Don’t jam the ports such as charger port, LED port, etc.
•  It is recommended to utilize the product below the maximum volume in order to protect hearing and extend the earbuds service life

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>