BOCCI 57.36 Pendant Lamp Instruction Manual

: June 5, 2024
: BOCCI

Table of Contents

BOCCI 57.36 Pendant Lamp
PRODUCT OVERVIEW
DESCRIPTION
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BOCCI 57.36 Pendant Lamp

BOCCI-57.36-Pendant-Lamp-
product

PRODUCT OVERVIEW

BOCCI-57.36-Pendant-Lamp-fig1

PENDANTS: thirty-six
MOUNTING: white powder coated round canopy 755mm (29.7”) in diameter x 53mm (2”) deep
LAMPING: 1.5w LED
COAX: ﬁ xed lengths. 3000mm (10’) standard / up to 30500mm (100’) maximum
MATERIALS: blown and dipped glass, cast borosilicate glass cap, braided metal coaxial cable, electrical components, white powder coated canopy
WEIGHT: approximately 66kg (146lb)
POWER SUPPLIES: integral

DESCRIPTION

57.36 is a random conﬁguration of thirty-six 57 pendants hung from a round canopy. The drop lengths of the pendants are randomized between a client speciﬁ ed range of heights to variously cluster and scatter. The result is an ambient installation or ﬁ eld of light. 57 is an exploration of a technique used for producing closed-cell foam. The process involves trapping voids of air of different sizes and conﬁgurations within a glass matrix, yielding a shape loosely referencing a rain cloud. These pockets of air remain invisible when the piece is off, but come alive to reveal an interior universe when the piece is illuminated. By virtue of the fabrication process, each piece is completely unique.

NOTES

+ Purchase replacement lamps online at www.bocci.com/shop/bulbs
+ As an alternative to a built-in power supply, Bocci recommends mounting power supplies remotely in an easily accessible and hidden location for ease of long-term maintenance.

Note: All connections and power supplies are tested by our technicians before shipping. However, it is possible for ports/power supplies to come loose or damage during shipping.
Test each port before installing canopy to the ceiling to catch any loose connections or faulty power supplies. Measure and mark the light ﬁxture canopy position on the ceiling.
Note: The client is responsible for providing a robust 16mm (5/8”) plywood backing or wood blocking to securely anchor to the structural substrate. Connections from the plywood to the structural substrate are the client’s responsibility. Measure the plywood so that it ﬁ ts within the canopy side walls (refer to detail above). Anchor the plywood backing to the structural ceiling substrate.
Connect power supplies to line voltage.
LED: connect the black wire to black and white wire to white wire. For the ground connection, connect the green wire with a yellow stripe to the bare copper wire or green wire in the junction box.
Note: Bocci strongly recommends mounting power supplies remotely in a close, accessible and hidden location for ease of long-term maintenance. Installation to be done by certiﬁ ed personnel to ensure compliance with the code.
Anchor canopy into the plywood backing using the fasteners provided. Turn power to ﬁxture on. Very carefully uncoil the braided coaxial cable in a spool-like manner. Insert your index ﬁngers into opposite sides of the roll then rotate your ﬁngers around each other to unroll the coaxial cable.
Use patience: allow the cable to uncoil completely to avoid kinks.
Attach the lamp to the lamp holder.
Slide the brass cap onto the coaxial cable.
Each pendant terrminates in a “headphone jack type connector which plugs into a receiving receptacle in the canopy Clients are encouraged to compose their own pendant configuration on site. thus creating a truly unique fixture. After plugging in each pendant, tum the threaded sheath into place by hand ensuring that it is adequately tightened Tools are not required Check that each lamp is Working properly as you go along by keeping power to the fixture on and lamps plugged in.
Insert the lamp assembly into the glass pendant.
Thread the brass cap onto the pendant.
Slide the coax cable through the slot on the pendant holder
Thread the glass cap onto the pendant, ensuring that the coax remains seated in the slot.
Clean ﬁngerprints from surfaces.