SuperATV XP1000 Front Inner Fender Armor Instructions
- June 5, 2024
- SUPERATV
Table of Contents
INSTALLATION INSTRUCTIONS
Fender Armor
Do not discard packaging until the product has been successfully installed.
*use
only if SuperATV Skid Plate is not installed
Liability Statement
SuperATV’s ® products are designed to best fit user’s ATV/UTV under stock
conditions. Adding, modifying, or fabricating any factory or aftermarket parts
will void any warranty provided by SuperATV® and is not recommended.
SuperATV’s® products could interfere with other aftermarket accessories. If
the user has aftermarket products on the machine, contact SuperATV® to verify
that they will work together.
Although SuperATV ® has thousands of satisfied customers, users should be
aware that installing lift kits, long travel, or suspension kits, tires, etc.
will change the ride of the machine and may increase maintenance and part
wear. Operating any off-road machine while, or after, consuming alcohol and/or
drugs increases the risk of bodily harm or death. No warranty or
representation is made as to this product’s ability to protect users from
severe injury or death. SuperATV® urges operators and occupants to wear a
helmet and appropriate riding gear at all times.
By purchasing and installing SuperATV® products, the user agrees that should
damage occur, SuperATV® will not be held responsible for loss of time, use,
labor fees, replacement parts, or freight charges. SuperATV®, nor any 3rd
party, will not be held responsible for any direct, indirect, incidental,
special, or consequential damages that result from any product purchased from
SuperATV ®. The total liability of the seller to the user for all damages,
losses, and causes of action, if any, shall not exceed the total purchase
price paid for the product that gave rise to the claim. SuperATV® will
warranty only parts provided by SuperATV®. Any damage or problems with OEM
housings, bearings, seals, or other manufacturers’ products will not be
covered by SuperATV®. SuperATV ® parts and products are not warrantied if the
item was not installed properly, misused, or modified.
Installing, adding, modifying, or fabricating any factory or aftermarket
product to your ATV/UTV may violate certain local, state, and federal laws. Be
advised that laws vary depending on the town, city, county, state, etc. Use of
certain products on public streets, roads, or highways may be in violation of
the law. The Buyer is solely and exclusively legally and personally
responsible for any violation of the law by the installation or use of the
product. You must abide by all local, state, and federal laws, including but
not limited to vehicle safety, traffic laws, and ordinances. It is your
responsibility to know the laws and how they apply to you. The Buyer is
responsible for fully understanding the capability and limitations of his/her
vehicle according to manufacturer specifications, warnings and instructions
and agrees to hold SuperATV® harmless from any damage resulting from failure
to adhere to such specifications, warnings, and/ or instructions. The Buyer is
also responsible to obey all applicable federal, state, and local laws and
ordinances when operating his/her vehicle while using this product, and the
Buyer agrees to hold SuperATV® violation thereof. harmless from any violation
thereof.
– Driver-side installation is shown.
– Unless noted, do not tighten hardware.
Secure Fender Armor with hardware shown.
– Align to machine and tighten all hardware.
– Repeat steps for passenger side installation.
Read instructions and view illustrations before beginning.
Thank You
For Choosing
2753 Michigan Road • Madison, Indiana 47250 •
855-743-3427
IN-FAP-P-PROXY 4/7/2022
Need help with your installation?
sales@superatv.com
1-855-743-3427
www.superatv.com
8:00am – 8:00pm EST M-Th
8:00am – 7:00pm EST Friday
9:00am – 2:00pm EST Saturday
© 2022 SuperATV.com®. All Rights Reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>