Laserliner 082 042 Thermo Spot Plus Infrared Thermometer Instruction Manual

: June 5, 2024
: Laserliner

Table of Contents

Function / Application
General safety instructions
Dimension
Product Overview
Instruction
Continuous measurement / Hold
MAX display
Setting the emission coefficient
Table of emission coefficients
Technical data
EU directives and disposal
SERVICE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Laserliner 082 042 Thermo Spot Plus Infrared Thermometer Instruction Manual

Function / Application

The ThermoSpot Plus is an infrared thermometer with an adjustable emission coefficient that can be used for measuring the temperature of a wide range of surfaces without having to make contact with them. The instrument measures how much electromagnetic energy is emitted in the infrared wavelength range and uses this information to calculate the surface temperature.

General safety instructions

Laser icon

Attention: Do not look into the direct or reflected beam.
The laser may not get into the hands of children!
Do not point the laser beam towards persons.
If a person‘s eyes are exposed to class 2 laser radiation, they should shut their eyes and immediately move away from the beam.
Do not expose the device to mechanical stress, extreme temperatures, moisture or significant vibration.
The device must only be used in accordance with its intended purpose and within the scope of the specifications. Modifications or changes to the device are not permitted, this will otherwise invalidate the approval and safety specifications.

Dimension

Product Overview

a. Laser beam switched on
b. Battery charge
c. Hold function
d. Measured value display
e. Max. value during the measurement / Emission coefficient
f. Display lighting
g. Unit of measurement °C
h. Set emission coefficient
i. ON / Measure

Product overview

Instruction

Continuous measurement / Hold

For continuous measurement activate the laser (see figure) and keep the button pressed.

Release the button as soon as the laser circle pinpoints the measurement location. The measured value is held.

Laser circle

The laser circle is a targeting aid to sight the location for the infrared measurement. Temperature measurement is only performed on the surface within the laser circle. Please ensure that the space between the instrument and surface to be measured is free of disturbances (steam, gas, contamination, glass).

Laser circle

Laser output

MAX display

The MAX display determines the maximum measured value within the context of a continuous measurement (keep trigger button pressed). As soon as you release the trigger button and press it again to start a new measurement, the MAX value will be reset and the instrument will start the process of recording the maximum measured value all over again.

MAX display

Setting the emission coefficient

A built-in sensor head detects the material/surface-specific infrared rays emitted by every object. The level of these emissions is determined by the material‘s emission coefficient (0.01 to 1.00). After switching on for the first time, the device is preset to an emissivity coefficient of 0.95, which is suitable for most organic materials as well as plastics, ceramics, wood, rubber and stone. For materials with different emissivity coefficients, please refer to the table under point 6.

Unknown emission coefficient:

Apply masking tape or black matt paint to the surface of the area whose temperature you wish to measure. Wait until the tape/paint has heated up. The temperature of the surface can then be measured with an emission coefficient of 0.95.

Setting the emission coefficient
Button pressed briefly: Value +0.01
Keep button pressed:
Value runs through 0.01 … 1.00

The emissivity coefficient last selected is set after the device is switched on. Check the emissivity ! coefficient setting before each measurement.

Table of emission coefficients

Metals

Alloy A3003
Oxidised
Roughened| 0.3
0.1- 0.3
---|---
Aluminium Oxidised| 0.2 -OA
0.04- 0.06
Polished
Brass
Polished
Oxidised| 0.3
0.5
Copper
Oxidised
Elect. terminal strips| 0.4
0.6
– 0.8
Haynes
Metal alloy| 0.3
– 0.8
Inconel
Oxidised
Sandblasted
Electropolished| 0.7
0.3
– 0.95
– 0.6
0.15
Iron
Oxidised
With rust
With red rust| 0.5-0.9 0.5-0.7 0.61 -0.85
---|---
Iron, cast
Oxidised
Non-oxidised
Molten mass| 0.6-0.95
0.2
0.2 -0.3
Iron, forged

Matt

| 0.9
Lead

Rough

Oxidised

| 0.4

0.2 -0.6

Molybdenum

Oxidised

| 0.2 -0.6
Nickel

Oxidised

| 0.2 -0.6
Platinum Black| 0.9
---|---
Steel
Cold rolled
Ground plate
Polished plate
Alloy (8% nickel, 18% chromium)
Galvanised
Oxidised
Heavily oxidised
Freshly rolled
Rough, flat surface
Rusty, red
Sheet, nickel plated
Sheet, rolled| 0.7 – 0.9
0.4 -0.6
0.1
0.35
0.28
0.80
0.88
0.24
0.95- 0.98
0.69
0.11
0.56
Zinc
Oxidised| 0.1

Nonmetals

Asbestos	0.93
Asphalt	0.95
Basalt	0.70
Brick, red	0.93
Carborundum	0.90
Ceramics	0.95

China

Brilliant white With glaze

| 0.7-0.75 0.92
Clay| 0.95
Coal Non-oxidised| 0.8-0.9
Concrete, plaster, mortar| 0.93
Cotton| 0.77
Earthenware, matt| 0.93
Fabric| 0.95
Glass| 0.85-0.94
Graphite| 0.7 -0.8
---|---
Gravel| 0.95
Gypsum| 0.8 -0.95
Heat sink Black, anodized| 0.98
Human skin| 0.98
Ice
Clear With heavy frost| 0.97
0.98
Lime| 0.3 -0.4
Lime maim brick| 0.95
Limestone| 0.98
Marble
Black, dull finish Greyish, polished| 0.94
0.93
Masonry| 0.93
Paint
Black, matt Heat-resistant White| 0.96 -0.98 0.92
0.85 -0.95
Paper

All colours

| 0.95-0.97
---|---
Plastic
Translucent PE, P, PVC| 0.95
0.94
Quartz glass| 0.93
Rubber
Hard
Soft, grey| 0.94- 0.95 0.89
Snow| 0.80
Soil| 0.9 – 0.98
Tar| 0.79-0.84
Tar paper| 0.91- 0.93
Transformer paint| 0.94
Wallpaper, light-coloured| 0.88- 0.90
Water| 0.93
Wood
Untreated
Beech, planed| 0.8 -0.95 0.94

Technical data

Technical revisions reserved. 01.15

Measurement range	-38°C … 600°C
Accuracy	± 2°C + 0,05°C / degree (-38°C … 0°C) ± 2°C (0°C … 600°C) or ± 2%

EU directives and disposal

This device complies with all necessary standards for the free movement of goods within the EU.

This product is an electric device and must be collected separately for disposal according to the European Directive on waste electrical and electronic equipment.

Further safety and supplementary notices at: www.laserliner.com/info

Diagram