eta 1051 90000 Electric hand-held mixer Instructions

eta 1051 90000 Electric hand-held mixer Instructions

SAFETY WARNING

• Before the first use, read the instructions for use carefully, look at the picture and store the instructions for use for the future. Consider the instructions for use as a part of the appliance and pass them on to any other user of the appliance.
• Check whether the data on the type label correspond with the voltage in your socket. The power cord plug has to be connected to the properly connected and grounded socket according.
• Never use the appliance if its power cord or plug is damaged, if it does not work properly, if it fell down and was damaged or if it fell to water. In this case take the appliance to a special service to check its safety and proper function.
• Do not insert the plug to or take it out of a socket with wet hands and do not pull the power cord!
• The product is intended for home use and similar (in shops, offices and similar workplaces, in hotels, motels and other residential environments, in facilities providing accommodation with breakfast). It is not intended for commercial use!
• This appliance must not be used by children. Keep the device and its supply cord out of reach of children. The device may be used by persons with reduced physical or mental abilities or lack of experience and knowledge only if they are under supervision or they have been instructed about using the appliance safely and understand the potential dangers. Children must not play with the appliance.
• Before replacing accessories or accessible parts, which move during operation, before assembly and disassembly, before cleaning or maintenance, turn off the appliance and disconnect it from the mains by pulling the power cord from the power socket!
• If the power cord of the appliance is corrupted, it has to be replaced by the producer, its service technician or a similarly qualified person so as to prevent dangerous situations.
• Be careful when handling the accessories (immersion blender), the knife is very sharp!
• Be careful when pouring hot liquid into the food processing device or the mixer because it may spurt out of the appliance because of sudden boil.
• Always unplug the appliance from power supply if you leave it unattended and before assembly, disassembly or cleaning.
• Never leave the appliance running unattended and keep checking it from time to time throughout the food processing time!
• Never immerse the drive unit into water or wash it in running water!
• Do not switch on the appliance without substances put in!
• Always use the mixer with the stand only in the operating position and in places where there is no risk of it tipping over. Never use the appliance near sources of  heat (such as the stove, electric or gas ring, etc.) or wet surfaces (such as wash basins, kitchen sinks, etc.).
• In case you are going to process hot liquid (mixing a hot soup with vegetables etc.), be careful because it may spurt out of the container because of sudden boil.
• Use the appliance designed for this type only. Using another appliance can represent a risk for the operator.
• Do not leave the appliance in operation without supervision and load!
• If the propulsion unit is operating, do not remove the accessories (e.g. whisks, hooks, blender), bowl, lid and do not fold out the arm of the stand!
• Take care that the cord never got in the way of the rotating tools.
• Working attachments can not be replaced during operation of the propulsion unit due to safety.
• Each time before plugging the appliance in the mains check whether the appliance master switch is in the OFF position ‘0’ and after finishing your work always unplug the appliance off the mains.
• Wash all parts which will come in touch with food before first use.
• Use the appliance only in its working position and at places where there is no risk of tipping and in sufficient distance from heat sources (e.g. heater, stove, cooker, grill etc.) and wet surfaces (sinks, basins etc.)
• Use the appliance only with accessory intended for this type of device. Using other accessory may pose danger for the user.
• Do not insert the accessories in any bodily orifices.
• Do not turn on the appliance without ingredients inserted!
• Do not remove the accessories if the propulsion unit is in operation!
• Before removing accessories or propulsion unit from the dish, let the rotating part stop.
• Do not process food at temperature exceeding about 80 °C.
• Never insert e.g. fingers, fork, knife, spatula or spoon into the rotating parts of the appliance and the accessories.
• Turn the device off and unplug from the power source by pulling the plug out of the socket before replacing any attachments or accessible parts which are moving during operation (before installing or unistalling, before cleaning or maintenance).
• Always unplug the appliance from the power source when left unattended.
• Do not let children use the appliance without supervision!
• If the processed ingredients start to stick on the accessory (e.g. the whisks, hooks, blender knife, lid or the dish), turn the appliance off and clean the accessory carefully with a spatula.
• Make sure that the accessory does not hit the walls of the dishes hard or that it does not get stuck in the thick matter or frozen ingredients when working with the mixer.
• Never immerse the propulsion unit in water or wash it with flow of water.
• Check the condition of the power cord of the appliance regularly.
• Make sure that the power cord does not hang over the edge of the working table where children could reach it.
• The cord must never be damaged with any sharp or hot object, by contact with flame or water.
• If you need to use the extension cord, it has to be uncorrupted and it has to comply with the valid standards.
• Never use the appliance for other than its designed purpose as outlined in this instruction for use!
• The producer does not undertake any responsibility for damage caused by improper use of the appliance and the accessories (e.g. food deterioration, injury by knife edge, fire, etc.) and its guarantee does not cover the appliance in the case of failure to comply with the safety warnings above

Features of the device

The basic version of the mixer 0046 includes propulsion unit, blending whisks kneading hooks. The extended version of the mixer 1046 includes an submersible blender and accessory holder which serves for storing the propulsion unit and working attachments. The deluxe version of the mixer 2046 is extended by a stand with a turning  bowl, a lid and a spatula.

A – propulsion unit

A1 – release button A4 – openings for connecting accessory
A2 – speed selector A5 – sliding cover (for closing the blender, if it is not in use)
A3 – MAX button A6 – supply cord

B – stand

B1 – fold-out bracket
B2 – bracket arrest button
B3 – mixer arrest button

C – lid

C1 – feeding opening cover

D – turning bowl
E – mixing whisks
F – kneading hooks
G – submersible blender
H – holder
I – spatula

PREPARATION FOR USE

Remove all packing items and unpack the mixer and its accessories. Remove all possible adhesion foils, stick-on labels or paper from the appliance. Before using the appliance for the first time, wash all parts coming in contact with the food in hot water with a suitable detergent, rinse them thoroughly in clean water and wipe them or leave them to dry.

Use of the individual levels (A2, A3)

0 – off
1 až 5 – speed selection (use for whisking, mixing, kneading).
MAX – the motor is running at max. power and is in operation the whole time the button A2 is pressed (for mixing). Submersible blender G may be turned on only with this button while the speed selector A2 must be in position 0!

Stand (B)

Folding out the bracket Press the B2 button and fold out the bracket B1 (pic. 6). When folding back the bracket, press the B2 button again and the bracket will fold back to the stand, arrest itself (a click will sound).

Removing the propulsion unit – by pressing button B3, the arrest will be released (pic. 4) it is possible to remove the propulsion unit A from the fold-out bracket B1.

Rotary bowl (D)
Place the rotary bowl in the stand B (Fig. 7). To remove the bowl, follow the above procedure in the reverse order

Attaching and removing the lid (C)

Put the lid onto the fold-out bracket B1 by sliding the protrusions on the lid into the protrusion in the fold-out bracket and pushing the lid all the way (pic. 5). Proceed reversely when removing the container.

Feeding opening cover (C1)

Sliding the cover aside, the feeding opening can be used to add liquid or solid ingredients in the bowl D while the propulsion unit A is running.

Holder (H)

The holder is deigned to hold the mixer and tools. Fit the holder on the wall using the supplied dowels and screws.
Make sure that there is no electric, telephone, plumbing fitting under the plaster at the place of mounting the holder.

USING ACCESSORIES

Take please the following tips for examples and inspiration. Rather than giving instructions, the aim is to show different ways how to process food. The processing times are never longer than a few minutes. It is advisable to break work from time to time, switch the appliance OFF (the 0 setting) and clean any sticking food off the tolls or the bowl or lid (see please I. SAFETY WARNING).

Whipping beaters (E)

Use: to beat or whip egg whites, cream sauces, cream, pastry, puree, etc. Never use the whipping beaters for mixing tough substances such as yeast dough.
Inserting: their reciprocal position is designated by a symbol on the bottom part of the propulsion unit (pic. 3). Insert the whisks into respective openings A4 in the bottom part of the propulsion unit all the way. Release the whisks by pressing the release button A1 (pic. 2).

Kneading hooks (F))

Use: spread processing, mashing potatoes, spinach, mixing dough etc.
Inserting: their reciprocal position is designated by a symbol on the bottom part of the propulsion unit (pic. 3). Insert the hooks into respective openings A4 in the bottom part of the propulsion unit all the way. The hooks can not be  exchanged is not possible because the ingredients would get pushed out of the bowl. Release the hooks by pressing the release button A1 (pic. 2)

Caution
After 5 minutes of uninterrupted work, leave the motor unit to cool down for a few minutes. Also a single beater or kneader can be used to process food. The tools can be disengaged only with the speed setting switch A2 in position 0.

Dip blender (G)

Use: to mix or blend any type of fluid, mayonnaise, diet and baby food, etc. in a suitable dish or bowl.
Inserting: slide away the cover A5 (pic. 8), screw the blender G into an opening in the propulsion unit A. When removing the blender from the propulsion unit, proceed reversely.

Stand with rotary bowl (B, D)

Use: for whipping or blending without the need for holding the motor unit in your hand.
Attaching: place the stand B on a flat working surface. Fasten the desired accessory E or F into the propulsion unit A (pic. 3). Place the blender on the bracket B1 so that the toothing on the accessory fits into the toothing in the fold-out bracket (pic. 4) and then push the blender into the protrusion in the bracket all the way (a click will sound). Slide the lid C on the bracket (pic. 5). Fold out the bracket B1 (pic. 6) and insert the bowl D into the stand along with the ingredients to be processed (pic. 7) fold the bracket back only after its arrest has been clicked in.

Storing the appliance and accessories

After finishing work, switch the mixer OFF and unplug the power cord plugA6 off the mains. Place the mixer A and its accessories E, F, G, I in holder H (Fig. 9). Store the appliance after cleaning at a dry, dustfree and safe place, out of reach of children and incapacitated people.

MAINTENANCE

Unplug the appliance from power supply by taking the fork of the power cord out of the socket! Do not use rough and aggressive detergents (e.g. sharp objects, scrapers, diluting agents or other solvents)! Clean the propulsion unit A with a damp cloth and soap. Make sure that water does not get to the inner parts. Wash other accessory immediately after use in hot water with soap, rinse in clean water and wipe dry (you can use a dish washer – not for blender G). The end with the blender G shaft must not be immersed during cleaning. Work very carefully when cleaning the blending attachment G. Pay attention that the cutting edges of the accessories do not come in contact with hard objects which blunt them and thus decrease their efficiency.

Some additives may cause the accessories to colour. This has no adverse effect over the appliance operation and any such colouring is likely to disappear with time. Never dry any plastic parts over a direct source of heat (such as the stove or gas or electric ring).

THE ENVIRONMENTAL PROTECTION

If the dimensions allow, there are labels of materials used for production of packing, components and accessories as well as their recycling on all parts. The symbols specified on the product or in the accompanying documentation mean that the used electrical or electronic products must not be disposed of together with municipal waste. For proper disposal, hand them over at the special collection places where they will be accepted free of charge. Suitable disposal of the product can help to maintain valuable natural resources and to prevent possible negative impacts on the environment and human health, which could be the possible consequences of improper waste disposal. Ask for more details at  the local authorities or at a collection site. Fines can be imposed for improper disposal of this type of waste in agreement with the national regulations. If the appliance is to be put out of operation for good, after disconnecting it from power supply we recommend cutting off the power cord and in this way it will not be possible to use the appliance again.

More extensive maintenance or maintenance requiring intervention in the inner parts of the appliance must be carried out by professional service! Failure to comply with the instructions of the manufacturer will lead to expiration of the right to guarantee repair!

TECHNICAL DATA

The product has received EC declaration of conformity according to Act as amended.

The product matches the requirements of the below statutory order as amended.

• Committee Regulation No. 2006/95/EC as amended, setting the technical requirements of the electrical appliance as low.
• Committee Regulation No. 2004/108/EC as amended, setting the technical requirements of products in terms of their electromagnetic Compatibility.

The product is in conformity with the European Parliament and European Committee Regulation No. 1935/2004/EC re. Materials and objects designed for contact with food. The manufacturer reserves the right for any insignificant deviations from the standard finished product which do not have any effect on the functioning of the product.

HOUSEHOLD USE ONLY.
DO NOT IMMERSE IN WATER OR OTHER LIQUIDS.
TO AVOID DANGER OF SUFFOCATION, KEEP THIS PLASTIC BAG AWAY FROM bAbIes AND CHILDREN. DO NOT USE THIS BAG IN CRIBS, BEDS, CARRIAGES OR PLAYPENS.
THIS BAG IS NOT A TOY

PRODUCER: ETA a.s., Zelený pruh 95/97, 147 00 Praha 4-Bráník, Czech Republic

References

• ElektroEko – Odbiór odpadów elektro
• Úvod | ELEKTROWIN, a.s.
• Úvod - Envidom
• ETA - tady je doma
• ETA - tu je doma

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>