eta 1033 LIMET Electric juicer for citrus fruits Instructions

: June 5, 2024
: ETA

Table of Contents

SECURITY ADVICE
FEATURES OF THE DEVICE (pic. 1)
PREPARATION FOR USE
MAINTENANCE
STORAGE
ENVIRONMENT
TECHNICAL DATA
Documents / Resources

Electric juicer for citrus fruits
INsTRuCTIoNs FoR use
LIMIT 13/5/2014

Electric juicer for citrus fruits
eta 1033
USER MANUAL
Dear customer, thank you for purchasing our product. Please read the operating instructions carefully before putting the appliance into operation and keep these instructions including the warranty, the receipt and, if possible, the box with the internal packing.

SECURITY ADVICE

Before first putting into operation read carefully the whole instructions, see the illustration and put the instructions to a safe place. Consider these instructions to be a part of the appliance and provide them to other users of the appliance.
Check whether the data on the type label corresponds with the voltage in your socket. The power cord plug has to be connected to the properly connected and grounded socket according to national standards.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
Before replacing accessories or accessible parts, which move during operation, before assembly and disassembly, before cleaning or maintenance, turn off the appliance and disconnect it from the mains by pulling the power cord from the power socket!
Do not leave the appliance plugged in power supply without supervision!
If the power cord of the appliance is corrupted, it has to be replaced by the manufacturer, its service technician or a similarly qualified person so as to prevent dangerous situations.
Never use the appliance if its power cord or plug is damaged, if it does not work properly, if it fell down and was damaged and it is leaking. In this case take the appliance to a special service to check its safety and proper function.
When the appliance is in operation, prevent pets, plants or insects to get in contact with it.
The product is intended for home use and similar (in shops, offices and similar workplaces, in hotels, motels and other residential environments, in facilities providing accommodation with breakfast).
It is not intended for commercial use!
Never put the plug to the power supply and pull it out with wet hands and do not pull the feed cable!
After finishing work and before cleaning, always switch off the appliance and disconnect it from power supply by taking the power cord connector out of the electric socket.
Never immerse the driving unit in water nor wash it under water flush!
Use the appliance only with the accessories designed for this type. Using other accessories can be dangerous for the operator.
Use the appliance only in working position in places where there is no fear of tipping over and within sufficient distance from thermal sources (e.g. kitchen-range, stove, gridiron, etc.) and wet surfaces (kitchen sink, wash-basin, etc.).
This appliance is not intended for outdoor use.
Do not place any objects on the appliance.
It is not permissible to adjust the surface of the appliance in any way (e.g. by means of self-adhesive wallpaper, foil, etc.)!
Make sure that hair or loose clothes do not get into the accessories to avoid risk of them tangling into the mixing blade.
If the propulsion unit is operating, do not remove the accessories.
Do not put the appliance into bodily holes.
Do not process frozen fruit or fruit too hard (e.g. pineapple, mango, etc.)
If the pulp of the processed fruit begins to collect on the sieve excessively, turn off the appliance and clean the sieve (e.g. under running water).
Make sure the supply cord does not get in contact with the rotating parts of the appliance.
The supply cord must not be damaged by sharp or hot subjects, by an open flame and it must not be immersed in water.
If you need to use an extension cable it must not be damaged and it must comply with the valid standards.
Make sure that the power cord does not hang over the edge of the working table where children could reach it.
Check the condition of the supply cord regularly.
Do not wind the power cord around the appliance; this will extend its life.
Never use the appliance for another scope than for which it was intended and described in the present instructions!
The manufacturer does not answer for damages caused by a wrong use of the appliance and its accessories (e.g. devaluation of foodstuffs, fire) and he does not guarantee for the appliance if the above-stated security advices have not been observed.

FEATURES OF THE DEVICE (pic. 1)

A – propulsion unit
A1 – propulsion shaft
A2 – supply cord
B – dish
B1 – closable drain
C – sieve
D1 – press spike
D2 – spike attachment
E – lid

PREPARATION FOR USE

Remove all packaging material, remove the juicer. Remove any possible adhesion foils, stick-on labels or paper from the appliance. Wash all parts that will come in touch with food in hot water with soap, rinse them thoroughly with clean water and wipe dry or let dry before first use. The appliance is now ready for use. Select the amount of processed ingredients so that the maximum content of the inside container does not exceed. It is necessary to divide bigger amounts of processed ingredients into several portions and check the contents of the container continuously.

If you decide to process more citrus fruits, fold the closable drain downward (hold the top container at the same time) and put the external container underneath. We recommend suspending work once in a while and removing the pulp which has collected on the sieve (see par. I. SAFETY PRECAUTIONS ). The preparation times depend on the amount, kind and quality of the citrus fruit used and range in tens of seconds.
Note
The device contains an internal container at a maximum capacity of 0,7 l. However, this is only to hold a smaller volume of the juice. If you are going to prepare more citrus fruits, always fold out the closable drain and let the juice go into the prepared external container
Assembling the juicer
Put the dish B on the propulsion shaft A1 so that it slides all the way down. Put the sieve C on the dish so that the protrusion fits into the space in the container. Slide the press spike D1 on the propulsion shaft A1 by pressing lightly. Proceed reversely when removing the individual parts. If you are going to juice big citrus fruit, slide the spike attachment D2 lightly on the spike D1.
Use of the juicer
Place the assembled juicer A on a firm, flat and dry surface. Connect the fork of the supply cord A2 to the mains. Half the selected citrus fruit (e.g. orange, lemon, grapefruit) and press them onto the press spike D1 or D2 which will automatically turn on the appliance. The juice is pressed and runs through the sieve into the dish. The protrusions on the spike push out the pulp. As soon the press on the spike is released, the appliance turns off. You can either pour the juice into another dish or keep it in a fridge.
Caution

The maximum time of operation is 5 minutes, then leave the appliance rest and cool down for approx. 15 min.
Do not apply much pressure on the press spike.
Under higher pressure on the cone, the drive unit may halt. A short-time pause does not cause harm to the unit.
Make sure that the bearing surfaces are clean and functional.
As soon as the juice level reaches the stainless sieve, it is necessary to empty the juice from the container.
The juice may contain pulp and small seeds, which may have passed through the openings in the sieve.
Make equal pressure on the citrus during use to prevent scratching the stainless sieve C with the edges of the press stud D1.

MAINTENANCE

Unplug the appliance from el. outlet before any handling with the appliance! Clean the appliance regularly after every use! Do not use any rough and abrasive cleaning agents! Clean the propulsion unit A with a damp cloth and soap. Clean all accessories (B, B1, C, D1, D2, E) immediately after use in hot water with soap (you can use a dishwasher). Some fruits may discolor the accessory.This change, however, does not have any influence on the surface characteristics in any way and it cannot be subject to a complaint under warranty! This discoloration will usually disappear with time.
Never dry the plastic die-cast over a heat source (e.g. stove, el./gas cooker).

STORAGE

Cover the assembled juicer with a lid E. Store the appliance after cleaning at a dry, dust-free and safe place, out of reach of children and incapacitated people.

ENVIRONMENT

Printed signs of materials used for manufacture, packing, components and accessories, as well as their recycling, are on all the pieces if their dimensions enable it. The symbols on the product or in the accompanying documentation mean that the used electric or electronic products must not be disposed of together with municipal wastes. Please, hand them over to the collection points designed for their correct disposal, where they will be accepted free of charge. By correct disposal of this product you can help to preserve valuable natural resources and help to prevent possible negative impacts to the environment and to human health, which could be the results of incorrect waste disposal.For further details ask the municipal authorities or the nearest collecting point. Penalties can be charged for incorrect disposal of such wastes, according to national regulations.If the appliance is to be put out of operation definitely, we recommend cutting off the feeder cable, to disable its use. Expert service must do the large maintenance or to intervene into inside parts of the appliance! Non-observance of the instructions of the manufacturer cancels the right for guarantee repair!

TECHNICAL DATA

Voltage (V)	given on type label
Absorbed power (W)	given on type label
Capacity of the vessel (l)	0,7
Weight (kg) approximately	1,7
Protection class of the appliance	II
Size of the product (mm)	25 x 17 x 20

Input in off mode is 0.00 W.
EC declaration on conformity was issued for the product.
Regarding EMC, the product conforms to Council Directive No. 2004/108/EC as amended and regarding electric safety, the product conforms to Council Directive No. 2006/95/EC as amended. The product is in compliance with the Regulation of the European Parliament and Council No. 1935/2004/EC on materials and articles intended to come into contact with food. The manufacturer reserves its right for unimportant deviations from the standard design without influencing of the product function.
NOTICE
material designed for contact with food

Typ 1033
The guarantee certificate is valid only for the Czech Republic and the Slovak Republic.
© DATE 17/1/2014