Laserliner 036 800 X3-Laser Three Dimensional Laser Instruction Manual

: June 5, 2024
: Laserliner

Table of Contents

Laserliner 036 800 X3-Laser Three Dimensional Laser
Function / Application
General safety instructions
Safety instructions
Safety instructions
Special product features
OVERVIEW
Use of lithium-ion rechargeable battery
Power supply
Horizontal and vertical leveling
Slope mode
Hand receiver mode
Information on maintenance and care
EU directives and disposal
SERVICE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Laserliner 036 800 X3-Laser Three Dimensional Laser

Completely read through the operating instructions, the „Warranty and Additional Information“ booklet as well as the latest information under the internet link at the end of these instructions. Follow the instructions they contain. This document must be kept in a safe place and if the laser device is passed on, this document must be passed on with it.

Function / Application

Three-dimensional laser with three 360° laser circles.
The slope-mode feature is an extra that permits gradients to be laid out.
Straight forward plumb function using laser crosses
Optimized for work close to the ceiling
Out-Of-Level: is indicated by optical signals when the unit is outside its self-leveling range.
With the magnetic clamp and wall bracket the device can be used as a standalone unit, in a combination as well as in horizontal and vertical positions.
Automatic leveling range 3°, Accuracy 0.2 mm / m.

General safety instructions

The device must only be used in accordance with its intended purpose and within the scope of the specifications.
The measuring tools and accessories are not toys. Keep out of reach of children.
Modifications or changes to the device are not permitted, this will otherwise invalidate the approval and safety specifications.
Do not expose the device to mechanical stress, extreme temperatures, moisture or significant vibration.
The device must no longer be used if one or more of its functions fail or the battery charge is weak.

Safety instructions

Using class 2 lasers

Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 515 nm
EN 60825-1:2014/AC:2017

Attention: Do not look into the direct or reflected beam.

Do not point the laser beam towards persons.
If a person‘s eyes are exposed to class 2 laser radiation, they should shut their eyes and immediately move away from the beam.
Under no circumstances should optical instruments (magnifying glass, microscope, binoculars) be used to look at the laser beam or reflections.
Do not use the laser at eye level (1.40 … 1.90 m)
Reflective, specular or shiny surfaces must be covered whilst laser devices are in operation.
In public areas shield off the laser beam with barriers and partitions wherever possible and identify the laser area with warning signs.

Safety instructions

Dealing with electromagnetic radiation
The measuring device complies with electromagnetic compatibility regulations and limits in accordance with the EMC Directive 2014/30/EU.
Local operating restrictions – for example, in hospitals, aircraft, petrol stations, or in the vicinity of people with pacemakers – may apply.
Electronic devices can potentially cause hazards or interference or be subject to hazards or interference.

When transporting always switch off all lasers, secure the pendulum, and set the slide switch to „OFF“

Special product features

Laserliner-036-800-X3-Laser-Three-Dimensional-Laser-
fig-1

Number and direction of the lasers

H = horizontal laser
V = vertical laser
S = Slopefunction

OVERVIEW

Laser emitting window
Slide switch
ON
OFF / Slope mode /
Transport lock
Rechargeable battery compartment (bottom)
1/4”/5/8“-tripod threads (bottom)
Connecting socket for mains adapter (5V/DC / 1000 mAh, no charging function)
LED Hand receiver mode
Hand receiver mode
LED Status indicator / Battery charge
Laser line selection button

Use of lithium-ion rechargeable battery

Use the power supply/charger unit only in closed rooms; do not expose to moisture or rain otherwise risk of electric shock.
Charge the device‘s battery completely prior to use.
Connect the power pack/charger to the mains power supply and the socket in the battery pack. Please only use the power pack/charger supplied. Using any other power pack/charger will invalidate the warranty.
The LED on the battery pack lights up red while the battery is charging. When the LED changes to green, charging is complete.
The status indicator (8) flashes when the battery charge is low.

The battery may only be charged with the battery charger provided and used only in this laser device. Any other use may cause injury or fire.
Make sure there are no conductive objects in the vicinity of the battery contacts. Short-circuiting of these contacts can cause burn injuries or fire.
Do not open the rechargeable battery. This could cause short circuits.

Power supply

To insert the lithium-ion rechargeable battery

Open the battery compartment and insert the lithium-ion battery as illustrated.

Operation with a power supply unit

The device can be used with the supplied power supply unit.

The battery is not charged when connected to the power supply.

Horizontal and vertical leveling

Release the transport restraint, and set slide switch (2) to „ON“. The horizontal laser line appears. The laser lines can be switched individually with the selection button.

The transport restraint must be released for horizontal and vertical leveling. The laser lines flash when the device is outside the automatic leveling range of 3°. Position the device such that it is within the levelling range.

Slope mode

Laserliner-036-800-X3-Laser-Three-Dimensional-Laser-
fig-7

Do not release the transport restraint, set slide switch (2) to „OFF“. Select the laser with the selector button (9). Sloping planes and tilts can now be measured. In this mode, the laser lines no longer align automatically. This is signalized by the laser lines flashing.

Hand receiver mode

Optional: Working with the laser receiver GRX Laserliner-036-800-X3
-Laser-Three-Dimensional-Laser-fig-8

Use a GRX laser receiver (optional) to carry out leveling at great distances or when the laser lines are no longer visible. To work with a laser receiver, switch the line laser to hand-held receiver mode by keeping button 7 (handheld receiver mode on / off) pressed. The laser lines will now pulsate with high frequency, making the laser lines darker. The laser receiver can detect these pulsating laser lines.

Observe the laser receiver‘s operating instructions for line lasers.
Due to the special optics required to generate a continuous 360° laser line, the underlying technology may cause differences in brightness in different areas of the line. This may lead to different ranges in hand receiver mode.

Preparing the calibration check

It is possible for you to check the calibration of the laser. To do this, position the device midway between 2 walls, which must be at least 5 meters apart. Switch the device on (Laser cross ON). The best calibration results are achieved if the device is mounted on a tripod.

Mark point A1 on the wall.
Turn the device through 180° and mark point A2. You now have a horizontal reference between points A1 and A2.

Performing the calibration check

Position the device as near as possible to the wall at the height of point A1.
Turn the device through 180° and mark point A3. The difference between points A2 and A3 is the tolerance.

When A2 and A3 are more than 0.2 mm / m apart, an adjustment is necessary. Contact your authorized dealer or else the UMAREXLASERLINER Service Department.

Checking the vertical line

Position the device about 5 m from a wall. Fix a plumb bob with a line of 2.5 m length on the wall, making sure that the bob can swing freely. Switch on the] device and align the vertical laser to the plumb line. The precision is within the specified tolerance if the deviation between the laser line and the plumb line is not greater than ± 1 mm.

Checking the horizontal line

Position the device about 5 m from a wall and switch on the cross laser. Mark point B on the wall. Turn the laser cross approx. 2.5 m to the right and mark point C. Check whether the horizontal line from point C is level with point B to within ± 1 mm. Repeat the process by turning the laser to the left.

Regularly check the calibration before use, after transport, and after extended periods of storage.

Calibration

The meter needs to be calibrated on a regular basis to ensure it produces accurate measurement results. We recommend carrying out calibration once a year.

Information on maintenance and care

Clean all components with a damp cloth and do not use cleaning agents, scouring agents, or solvents. Remove the battery pack before storing it for longer periods. Store the device in a clean and dry place.

Technical data (Subject to technical changes without notice. 20W29)| |
---|---|---
Self-levelling range| ± 3°|
Accuracy| ± 0.2 mm / m| |
Levelling| automatic|
|
Visibility (typical)*| vertical: 40 m / horizontal: 60 m|
Working range with hand receiver| (depends on how the technology

affects the difference in brightness) 60 m

Power supply

| Li-ion battery pack 3.7V / 4.5 Ah; Power pack 5V/DC / 1000 mAh Power pack 5V/DC / 2000 mAh|
Charging time| approx. 6 hours|
Operating time with 3 laser levels with 2 laser levels with 1 laser level|

approx. 3 hours

approx. 5.5 hours

approx. 8 hours

|

Operating conditions

| 0°C … 50°C, max. humidity 80% rH,

no condensation, max. working altitude 4000 m above sea level

EU directives and disposal

This device complies with all necessary standards for the free movement of goods within the EU. This product is an electric device and must be collected separately for disposal according to the European Directive on waste electrical and electronic equipment. Further safety and supplementary notices at: http://laserliner.com/info/?an=AHC

Laserliner-036-800-X3-Laser-Three-Dimensional-Laser-
fig-12