eta Ultimo 0093 90050 Electric Food Cutter Instruction Manual

Electric food cutter
• INSTRUCTIONS FOR USE
Ultimo

Electric food cutter
eta 0093
INsTRuCTIoNs FoR use

|
---|---

SAFETY WARNING

— Before first use, read these instructions for use carefully, look at the pictures and keep these instructions for use for future reference. Consider these instructions to be a part of the appliance and pass them on to any other user of the device.
— Check whether the data on the type label corresponds with the voltage in your socket. The power supply plug has to be connected to a socket of the electrical installation that conforms to respective standards.
— Never use the appliance if its power cord or plug is damaged, if it does not work properly, if it fell down and was damaged or if it fell into the water. In this case, take the appliance to a special service to check its safety and proper function.
— Do not insert or take the plug out of a socket with wet hands and do not pull the power cord!
— The socket must be easily accessible so that the appliance could be easily unplugged from the mains in case of danger.
— This appliance may not be used by children!
— This appliance can be used by people with reduced physical, sensual or mental abilities or lack of experience and knowledge if they are supervised or if they were instructed regarding use of the appliance in a safe way and if they understand possible risks. Children must not play with the appliance.
— Keep the appliance and its power cord out of the reach of children.
— Before replacement of accessories or accessible parts that are moving when the appliance is used, before assembly and disassembly, before cleaning or maintenance,
switch off the appliance and remove it from the electric power by unplugging the power cord from the electric socket!
— Always unplug the appliance from the power supply if you leave it unattended and before assembly, disassembly or cleaning.
— Do not place any objects onto the appliance.
— The appliance is intended for use in households only and for similar use (preparation of meals)! It is not intended for commercial use and for use in facilities such as kitchenettes for staff in shops, offices or farms, or in other work environments. The appliance is not intended for use by clients in hotels, motels, B&B facilities, and other accommodation facilities.
— Never immerse the appliance into water or wash it in running water!
— Never leave the running appliance unattended and keep an eye on it during the whole process of food preparation!
— Always unplug the appliance from the power supply if you leave it unattended.
— Use the appliance in the working position only at places with no risk of its turning over and in a sufficient distance from heat sources (e. g. heater, electric/gas cooker, stove,
etc.) and wet surfaces (e. g. sinks, wash basins, etc.)
— Before preparation, remove possible packages from food (e.g. paper, PE bag, etc.)
— Use accessories designed for this type of appliance only. Using other types of accessories can present a risk for the operator.
— Do not insert the appliance into anybody’s holes.
— Do not expose this appliance to atmospheric effects (e.g. sunshine, rain) and temperatures below 0 °C.
— Never put fingers into the knife area or use e.g. a fork or a knife to do so. In order to move food towards the knife, always use the sliding plate with the attached pusher plate if possible, given the size or shape of the foodstuff.
— Never use the slicer when you have wet hands or if you are standing on a wet floor. Do not use the slicer if it is wet or moist!
— Use the slicer only for slicing defrosted food! Do not use it for slicing dry, hard bakery products and bread, smoked meat with bones or meat with bones, fruit with hard stones, or food packed in aluminum foil or plastic foil.
— Before plugging the appliance to the power supply, always check whether the knife is attached properly.
— Always switch off the slicer if you wish to set the slice thickness or take out the knife.
— Before taking out the food, let the rotating knife stop completely first. After switching the drive off, it runs down for a short time. After the operation, set the slice thickness regulator to position 0.
— Be careful when handling the knife (e.g. taking it out, cleaning), it is very sharp.
— If food starts sticking to the knife, switch off the appliance and clean the knife carefully (e.g. by a wooden spatula).
— Do not exceed the maximum allowed period of continuous operation of the appliance.
— It is not permissible to adjust the surface of the appliance in any way (e.g. by means of the self-adhesive paper, foil, etc.)!
— Make sure that the power supply cable does not get in between the rotating parts of the appliance.
— The power cord must not be damaged with sharp or hot objects, or open fire and it must not be immersed in water.
— Never put it on hot surfaces or do not let it hang over the edge of a table or work desk. Hitting, stumbling over or pulling the power cord, e.g. by children, can result in tilting over or drawing the appliance down and cause serious injury!
— If you need to use an extension cord, it has to be uncorrupted and it has to comply with the valid standards.
— If the power cord of the appliance is corrupted, it has to be replaced by the manufacturer, its service technician or a similarly qualified person so as to prevent dangerous situations.
— Use this appliance only for its intended purpose described in these instructions for use!
— Never use the appliance for any other purpose!
— The producer does not undertake any responsibility for damage or injuries caused by improper use of the appliance and the accessories (e.g. food deterioration, injuries, cuts) and its guarantee does not cover the appliance in the case of failure to comply with the safety warnings above.

Features of the device (pic. 1, 2)

A – propulsion unit

PREPARATION FOR USE

Remove all packaging material, and remove the accessory. Remove all adhesive foils, stickers or paper from the appliance. Wash the parts which will come in contact with the food in hot water with soap before first use. If you want to cut bigger amounts of food, you may use the tray in the bottom part of the guiding board for storing away cut food. Place the cutter on a dry place on a table or kitchen desk with good surface adhesion.

Assembling the cutter (B5, B6, B7, B8)
Insert the thumb protector B8 into the opening in the feeding device B6 and secure by pushing lightly (an audible clap will sound). Both parts will remain attached. Fold down the guiding board B5 and slide the feeding device B6 on the board so that the protrusion on the bottom part of the feeding device fits into the protrusion in the guiding groove of the board. The feeding device must move on the guiding board lightly. Then slide the food holder B7 on the feeding device from the side. When using the cutter correctly, the food holder serves as a hand rest and thumb protector.

Slices thickness regulator (B1)
Set the desired thickness of the slice in a range of 0 – 15 mm by turning the B1 disc. The thickness of the slice is marked on the B2 scale.

Switch and safety switch (A1, A2)

For putting the cutter into operation, it is necessary to press both the switches A1, A2. First press the A1 switch (hold it down) and then press the safety switch A2. Releasing the switches, the cutter will turn off automatically.

 USING THE CUTTER

Consider these following tips for processing examples and inspiration whose purpose is not to provide a manual but to show ways of different food processing. The cutter is
designed for cutting bread, pastry, smoked goods, meat, cheese, vegetable, and fruit. From time to time, we recommend pausing the operation, turning the appliance off and removing parts of ingredients that have stuck on the knife or the dish (see par. I. SAFETY  PRECAUTIONS).

the slices do not stick)
smoked goods (ham, flitch)| 2 mm
smoked goods (dry-hard salami.| 1 mm

Set the desired thickness of cut slices by turning regulator B1. Place the food on the feeding device B6 and push it fluently to the cutting knife with the holder B7. Pressing both the switch and the safety switch A1, and A2, the cutter will turn on. The cut slices fall on the tray B9 placed next to the cutter. If you want to interrupt or stop cutting, release the A1 and A2 switches.

Note
The maximum time of operation is 6 minutes, then leave the appliance to rest and cool down for approx. 30 min. If the propulsion unit is overloaded, there might be vibrations in the cutter. In such a case, turn the cutter off and keep a break approx. 15 min. necessary for cooling down the propulsion unit.

MAINTENANCE

Before any handling of the appliance pull out the fork of the supply cord A4 from the el. outlet. Do not use rough and abrasive cleaning agents (e.g. sharp objects, scrapers, diluents or other dissolvents)! You may remove the propulsion unit A, knife B3, and board for slice thickness setting B4 for easier cleaning. Pushing the A3 button you will release the arrest of the propulsion unit in the cutter and you will then remove it by its folding out (pic. 3). Clean the propulsion unit A with a damp cloth and soap. Remove the slice thickness setting board from the cutter by turning the regulator B1 until the board B4 is unscrewed. Clean all accessories immediately after use in hot water with soap (you can use a dishwasher). Hold the knife by the plastic holder in its center and release it by turning it clockwise all the way. Then lightly slide the knife out from the cutter (pic. 4). Be very careful when cleaning the knife! Pay attention that the cutting edges of the accessories do not come in contact with hard objects which blunt them and thus decrease their efficiency. Some foods may discolor the accessory. This has, however, no effect on the functions of the appliance and this discoloration will usually disappear with time. Never dry the plastic die-cast over a heat source (e.g. stove, el./gas cooker). After cleaning, store the appliance in a dry, dustless, safe place, out of reach of children and persons sui juris.

ENVIRONMENTAL PROTECTION

If the dimensions allow, there are labels of materials used for the production of packing, components, and accessories as well as their recycling on all parts. The symbols specified on the product or in the accompanying documentation mean that the used electrical or electronic products must not be disposed of together with municipal waste. For proper disposal of the product, hand it over at special collection places where it will be received free of charge. Suitable disposal of the product can help to maintain valuable natural resources and to prevent possible negative impacts on the environment and human health, which could be the possible consequences of improper waste disposal. Ask for more details at the local authorities or at a collection site. Fines can be imposed for improper disposal of this type of waste in agreement with the national regulations. If the appliance is to be put out of operation, after disconnecting from the power supply we recommend its cutoff, and in this way it will not be possible to use the appliance again.

More extensive maintenance or maintenance requiring intervention in the inner parts of the appliance must be carried out by professional service! Failure to comply with the instructions of the manufacturer will lead to the expiration of the right to guarantee repair!

TECHNICAL DATA

The product has received ES declaration of conformity according to Act as amended. The product matches the requirements of the below statutory order as amended.
– Committee Regulation No. 2006/95/ES as amended, setting the technical requirements of the electrical appliance as low.
– Committee Regulation No. 2004/108/ES as amended, setting the technical requirements of products in terms of their electromagnetic compatibility.
The manufacturer reserves the right to make insignificant changes to the standard make that do not affect the function.

TO AVOID THE DANGER OF SUFFOCATION, KEEP THIS PLASTIC BAG AWAY FROM BABIES AND CHILDREN. DO NOT USE THIS BAG IN CRIBS, BEDS, CARRIAGES, OR PLAYPENS. THIS BAG IS NOT A TOY.

References

• ElektroEko – Odbiór odpadów elektro
• Úvod | ELEKTROWIN, a.s.
• Úvod - Envidom
• ETA - tady je doma
• ETA - tu je doma

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>